Home >> Security & Surveillance >> Surveillance Cameras >> Fusionsea 1/3inch 1/4inch CCD CCTV 3Lux 420TVL Wired Dome Color Camera ES701CCD

Fusionsea 1/3inch 1/4inch CCD CCTV 3Lux 420TVL Wired Dome Color Camera ES701CCD


New 1/3, 1/4 picture sensor wired dome CCTV color hat CCD camera with high validity pixel of PAL 628 x 582, NTSC 510 x 492, 420TVL horizontal resolution, 3 lux minimum illumination, support DC 12V/200mA, less than 640MW.It is easy to setup and simple...
Retail Price:
USD$ 70.78
Wholesale Price:
Wholesale Price
Quantity 2-56-1415-39≥40
Price USD$ 22.44USD$ 21.29USD$ 20.15USD$ 18.62
TV Standard:
If you want to buy only 1 piece, please alter the quantity in ‘My Cart’.
Note: you could enjoy the wholesale price of this item as long as the item quantity of your order is more than 1.
  • For online wholesaler or distributor, you can buy directly online. If you want to buy more than offered quantities for better price, please click wholesale inquiry.

  • Top Selling
  • Overview


  • Camera Apparatus: 1/3, 1/4 CCD
  • System: PAL / CCIR, NTSC / EIA
  • Validity Pixel: PAL: 628 x 582, NTSC:510 x 492
  • Picture Area: PAL: 5.78 x 4.19mm, NTSC: 4.69 x 3.45mm
  • Horizontal Definition: 420TVL
  • Scan Frequency: PAL / CCIR: 50Hz, NTSC / EIA: 60Hz
  • Minimum Illumination: 3LUX
  • Sensitivity: 18DB-AGL ON-OFF
  • Voltage: DC12V
  • Current: 200mA
  • Power Consumption: <=640MW


Fusionsea 1/3inch 1/4inch CCD CCTV 3Lux 420TVL Wired Dome Color Camera ES701CCD

  • Dome cameras offer several advantages when used as part of home security systems

How to Install a Dome Camera in a Home Security System:

  • Select the location where you would like to install the dome camera
  • Drill holes to install the mounting bracket
  • Insert the camera into the dome and connect wiring, if necessary
  • Adjust the camera to the correct position
  • Test the dome camera to make sure it is working properly

How to Clean a Dome Camera:

  • Apply Lexan cleaning solution liberally to the washable mitt. Gently wring out the washable mitt.
  • Attach the washable mitt to the mitt holder. Attach the mitt holder to the extension pole.
  • Grasp the pole and lift the end with the mitt up toward the dome camera.
  • Cradle the dome of the dome camera with the mitt so that the mitt surrounds the entire dome.
  • Rotate the pole clockwise so that the mitt rotates around the dome of the security dome camera. Reverse direction and rotate the mitt counterclockwise. Remove the mitt. Let the dome camera dry.
  • Reapply Lexan cleaning solution to the washable mitt. Repeat the cleaning process of rotating the mitt clockwise and then counterclockwise on the dome of the dome camera. Remove the mitt and let the dome camera dry.
  • Remove the mitt holder from the extension pole. Remove the washable mitt from the mitt holder. Clean the washable mitt in cold water and let it dry.

Package Included:

  • 1 x Wired DOME Color Hat CCD Camera