Home >> Security & Surveillance >> Surveillance Accessories >> 1/3" LG B/W 480 TVL 0.5 Lux CCD Camera Main Board A025B

1/3" LG B/W 480 TVL 0.5 Lux CCD Camera Main Board A025B


This is a 1/3" LG B/W 480 TVL CCD security camera main board, it's easy to install. The board features 480TVL and 0.5 Lux minimum illumination. This board supports PAL and NTSC. It has been fully tested to ensure complete functionality. This main boa...
Retail Price:
USD$ 61.38
Wholesale Price:
Wholesale Price
Quantity 2-56-1415-39≥40
Price USD$ 26.15USD$ 24.99USD$ 23.84USD$ 22.30
TV Standard:
If you want to buy only 1 piece, please alter the quantity in ‘My Cart’.
Note: you could enjoy the wholesale price of this item as long as the item quantity of your order is more than 1.
  • For online wholesaler or distributor, you can buy directly online. If you want to buy more than offered quantities for better price, please click wholesale inquiry.

  • Top Selling
  • Overview


  • Image Sensor: 1/3" LG B/W CCD
  • Effective Pixels: PAL:500(H) x 582(V); NTSC:510(H) x 592(V)
  • Scanning System: PAL: 625 Lines, 50 frames / sec,  NTSC: 525 Lines, 60 frames / sec
  • Horizontal Resolution: 480 TV Lines
  • Minimum Illumination: 0.5 Lux
  • Video Output: 1Vp-p -75 Ohm
  • Audio: Yes
  • Power Consumption: DC12V ± 10%, 80mA
  • White Balance: Auto
  • S/N Ration: >48dB
  • Gamma Characteristics: 0.45
  • Sync System: Internal
  • Electronic Shutter: PAL: 1 / 50 - 100,000 sec, NTSC: 1 / 60 - 100,000 sec
  • Temperature: -10 ℃ ~ +50 ℃, humidity of no more than 95%
  • Storage Temperature: -20 ℃ ~ +60 ℃, humidity of no more than 95%
  • Size: 23 x 23mm / 0.90 x 0.90in(L x W)



  • 1/3" LG B/W CCD Camera Main Board

How to Clean a CCD Camera:

  • Plug the camera in. If the batteries were to die while you're cleaning, the camera will automatically close on your cleaning tools and will need expensive repairs
  • Read your camera's manual to find out how to lock the mirror and hold open the shutter. It may be a custom function on your camera, and your manual will describe how to do this. Each camera is slightly different
  • Use an air blower to blow air onto the mirror to clean off larger particles of dust. Do not stick the air blower inside the camera. If the camera closes, or the mirror moves, it will scratch it. A foot-powered air pump works well
  • Use a sensor brush to clean the camera's sensor. Only use a sensor brush if this is not the first time the camera has been cleaned. Move the brush gently from left to right, take it out and spray it off with the air brush, then stroke the sensor again. Repeat this until the sensor appears clean

Package Included:

  • 1 x 1/3" LG B/W 480 TVL CCD Camera Main Board