Home >> Security & Surveillance >> Surveillance Cameras >> Sorlia 1/3inch SONY CCD 420 TVL 18m IR 22 Lights Dome Camera CM315CHD

Sorlia 1/3inch SONY CCD 420 TVL 18m IR 22 Lights Dome Camera CM315CHD


If you want to view more than one area, you'll need at least one camera per area. In some cases you may require two or more cameras in an area. If good identification is required, a general rule of thumb would be that each camera should cover an area...
Retail Price:
USD$ 95.98
Wholesale Price:
Wholesale Price
Quantity 2-56-1415-39≥40
Price USD$ 34.10USD$ 32.21USD$ 30.32USD$ 27.81
TV Standard:
If you want to buy only 1 piece, please alter the quantity in ‘My Cart’.
Note: you could enjoy the wholesale price of this item as long as the item quantity of your order is more than 1.
  • For online wholesaler or distributor, you can buy directly online. If you want to buy more than offered quantities for better price, please click wholesale inquiry.

  • Top Selling
  • Overview


  • Image Device: 1/3 inch SONY CCD
  • Validity Pixel: PAL: 628 x 582, NTSC: 510 x 492, PAL: 628 x 586, NTSC: 510 x 496
  • TV System: PAL/NTSC
  • Horizontal Definition: 420TV Lines
  • Mininmum Illumination: 0 Lux/F1.2(Infrared lights are on)
  • Number of Infrared Lights: 22PCS
  • Infrared Range: 18m
  • Video Output: 75ohm/1.0vp-p
  • S/N Ratio: >48db
  • Gamma Correction: >0.45
  • White Balance: AUTO
  • Electronic Shutter: 1/50(1/60)-1/100,000sec
  • Backlight Compensation: AUTO
  • Operation Temperature: -10°C~+50°C
  • Power Adapter: DC12V/500mA
  • Dimession: 130 x 130 mm / 5.12 x 5.12 in

Operating Instruction:

  • Fix the camera on the proper supervision place with screws by the bracket
  • Insert the corresponding power adapter into the interflow power plug, and insert its DC output plug into the DC input plug of the camera
  • Insert one head of the video line into the video input plug of the monitor or the adjust the camera to the supervision


  • If the picture in the monitor or TV is not clear, you can take the cover of the camera lens, and revolve the lens to the focal distance until the picture in the monitor or TV becomes clear, and then install the lens cover
  • Do not attempt to disassemble the camera except the professionals
  • In order to prevent electric shock, do not remove screws or cover
  • There are no user-serviceable parts inside
  • Handle the camera with care. The camera could be damaged by improper handing or storage
  • Do not use strong or abrasive detergents when cleaning the camera body
  • Use a dry cloth to clean the camera when dirty, In case the dirt is hard to remove
  • Use a mild detergent and wipe gently
  • Never point the camera to ward the sun. Whether the camera is used outdoors or not, never point it to ward the sun
  • Use caution when operating the camera in the vicinity of spot lights or other bright reflecting objects
  • Do not operate the camera beyond its temperature. humidity or power source ratings
  • Do not use the camera in an extreme envirnoment where high temperature or high humidity exists
  • Use the camera under conditions where temperatures are between 14F~122F(-10~+50), and humidity is below 85%. For the correct power supply, refer to the specification sheet


Sorlia 1/3inch SONY CCD 420 TVL 18m IR 22 Lights Dome Camera CM315CHD

Sorlia 1/3inch SONY CCD 420 TVL 18m IR 22 Lights Dome Camera CM315CHD 

Sorlia 1/3inch SONY CCD 420 TVL 18m IR 22 Lights Dome Camera CM315CHD 

What are the recommended camera placements to capture the most relevant shots?

  • Never angle a camera to look straight down. A camera that's pointed straight down will only catch the top of a perpetrator's head. The camera will most likely miss many of the distinguishing characteristics that can be used to identify a person later if necessary
  • Always make sure to have a camera facing all entrances It is a fact, that the best time to catch the facial features of an individual is during their entrance into the building, whether it is your home or your business. Other cameras can catch the act of someone in the act of stealing; however, without the critical entry-shot you may not be able to identify the individual
  • Never allow direct sunlight to touch the lens of the camera. Regardless of which cameras you use, make sure that the cameras are never mounted in such a way that sunlight will directly shine into the lens. This will cause the Image sensor to discolor and fail. Direct sunlight will also immediately void any warranty
  • Mount I/R Cameras within 20 ft. of subject being viewed.  Infrared bulbs emit an invisible light spectrum that will illuminate a subject even in complete darkness...however, the light will only project out 20-40 ft. to illuminate the target
  • Always plug cameras into a surge suppressor or Battery Back-up unit. Cameras are extremely sensitive to voltage changes and can fail prematurely. Voltage changes will also void the cameras warranty

Package Included:

  • 1 x CCD Dome Camera