Home >> Security & Surveillance >> Surveillance Cameras >> Fusionsea 1/3inch SONY CCD 420TVL 0.5LUX IP Network Camera IS-IP02SN

Fusionsea 1/3inch SONY CCD 420TVL 0.5LUX IP Network Camera IS-IP02SN

SKU:A1358000AP

Want to get an IP Network Camera for more security? This is a 1/3inch SONY CCD 420TVL 0.5LUX IP Network Camera, just ready for you. Brand new WiFi IP H.264 1/3 inch SONY camera, 420TVL horizontal resolution, 0.5LUX usable illumination, less than 6W m...
Retail Price:
USD$ 431.98
Wholesale Price:
 
Wholesale Price
Quantity 2-45-910-29≥30
Price USD$ 173.52USD$ 168.92USD$ 164.32USD$ 158.18
 
TV Standard:
Qty:
pieces
If you want to buy only 1 piece, please alter the quantity in ‘My Cart’.
Note: you could enjoy the wholesale price of this item as long as the item quantity of your order is more than 1.
  • For online wholesaler or distributor, you can buy directly online. If you want to buy more than offered quantities for better price, please click wholesale inquiry.

  • Top Selling
 
  • Overview

Specifications:


  • Image Sensor: 1/3 SONY CCD
  • Horizontal Resolution: 420TVL
  • TV System: PAL/NTSC
  • Usable Illumination: 0.5LUX
  • Auto Iris Control: DC drive
  • Video Compression: H.264 Baseline Profile@Level 2.2
  • Video Definition: PAL:352 x 288(CIF),704 x 288(2CIF), 704 x 576(D1); NTSC:352 x 240(CIF), 704 x 240(2CIF), 704 x 480(D1)
  • Video Parameters: Brightness, Hue, Contrast, Saturation, Image quality
  • Streaming Format: Optional Video Streaming or Audio&Video composite Streaming
  • Video Frame Rate: PAL: 1-25frames/second, NTSC:1-30frames/second
  • Video Compression Bitrates: 16Kbit/S~4Mbit/S
  • Audio Input: 1channel,linear input
  • Audio Compression: G.726
  • Audio Output: 1channel,RCA interface, linear output
  • Audio Talk-Back: Built-in Mic
  • Supported Protocols: TCP, UDP, IP, HTTP, FTP, SMTP, DHCP, DNS, ARP, ICMP, POP3, NTP, IPsec, UPNP, RTP, RTCP
  • System Interface: 10M/100M self-adapting Ethernet port, 1 RS485 port (supports transparent protocols), WiFi port(802.11b/g wireless network) SD card slot
  • Alarm Input: 1 channel on/off input, supporting NO (normally open) or NC (normally close) sense.
  • Alarm Output: 1 channel on/off output,120VAC 1A/24VDC 1A
  • Input Power Supply: DC 12V,1A
  • Maximum Power: Less than 6W
  • Operating Temperature: -10 ~ +55℃
  • Operating Humidity: 10 ~ 85%

System Requirements: 


  • Operation System: Microsoft Windows 98/ME/2000/XP/2003
  • Browser: Microsoft Internet Explorer 5.x or above
  • Dimension: 133 x 63 x 64mm/5.24 x 2.48 x 2.52in(L x W x H) 

Features:


  • High-density and programmable communication media processor Hi-silicon Hi3510, SOC single chip solution, equipped with two processors, ARM9 and DSP
  • Support both high sensitivity SONY CCD
  • Waterproof, 48 pcs of IR Led,IR distance 20M~50M
  • H.264 baseline profile@Level 2.2, realize transmission of High Definition video over low network bandwidth easily
  • Up to 30 frames per second in all resolutions ranging up to 720x480
  • Up to 10 viewers can directly access the camera simultaneously
  • Built-in Web server enables the use of a standard Web browser for viewing and management.
  • Support remote software upgrade safely function
  • Support dynamic IP address , LAN, Internet (ADSL and Cable Modem)
  • Network protocols: HTTP, TCP/IP, UDP, SMTP, PPPoE, DDNS, DNS, SNTP, DHCP, FTP, SNMP
  • Support Bi-directional real- time transmission of audio talk-back &broadcast
  • Network self-adapting technology to adjust video frame rate automatically according to the network bandwidth
  • Provide video lost motion detection and sensor alarm functions (Area Sensitivity can be setted)
  • Provide RS485/RS232 serial port with several built-in high-speed domes and decoder protocols, supports transparent protocols
  • Auto-recovery function if exception occurs and auto-connection if the network

Details:

Fusionsea 1/3inch SONY CCD 420TVL 0.5LUX IP Network Camera IS-IP02SN

Fusionsea 1/3inch SONY CCD 420TVL 0.5LUX IP Network Camera IS-IP02SN

How to Set Up IP Security Cameras:


  • Mount the camera (screw it in place or use the attachment that came in the box) in a location close to a power outlet
  • Install a network cable to the location of your mounted camera. One end of the network cable is plugged into a port on the back of the wireless router
  • Plug the network cable into the camera and insert the power cable prong into the outlet
  • Insert the CD that came bundled with your camera and install the security camera software and driver. This software suite is the central hub on the camera's viewing and recording. You will have access to numerous controls and features

Package Included:


  • 1 x IP Network Camera