Home >> Security & Surveillance >> Surveillance Cameras >> 1/3 Inch SONY CCD 480TVL 30 IR LED Waterproof Camera AVS-K608

1/3 Inch SONY CCD 480TVL 30 IR LED Waterproof Camera AVS-K608


Deluxe 1/3 inch SONY Chip, 480 TV Line, 30 LED infrared day and night waterproof, dustproof security CCTV wired CCD color camera, has 60 meters infrared effective distance at indoor. High sensitivity, low smear, excellent anti-blooming, and high S/N ...
Retail Price:
USD$ 123.65
Wholesale Price:
Wholesale Price
Quantity 2-45-910-29≥30
Price USD$ 61.14USD$ 57.20USD$ 53.26USD$ 48.00
TV Standard:
If you want to buy only 1 piece, please alter the quantity in ‘My Cart’.
Note: you could enjoy the wholesale price of this item as long as the item quantity of your order is more than 1.
  • For online wholesaler or distributor, you can buy directly online. If you want to buy more than offered quantities for better price, please click wholesale inquiry.

  • Top Selling
  • Overview


  • Image Sensor: 1/3" SONY color CCD 
  • Signal Format: PAL / NTSC
  • Horizontal Resolution: 480TV lines
  • Minimum Illumination: 0Lux / F1.2 (IR ON)
  • Lens: 16mm IR lens
  • Effective Distance at Night: 60m indoors
  • IR LED: 8(Diameter) LED 30pcs
  • Electronic Shutter: 1/50~1/100000 Seconds (PAL)
  • NTSC: 1/60~1/100000 Seconds 
  • Operation Temperature: -10℃~+50℃/ +14˚F~+122˚F
  • Supplied Power: DC 12V ± 10% 680mA
  • Size: 98 x 138mm / 3.9 x 5.4in (Dia. x L)


  • Base on 1/3" SONY color CCD sensor
  • Built-in 30 super IR-LEDs
  • Waterproof and weather resistant housing for outdoor use
  • Excellent night vision
  • Economical solution, includes board lens
  • High sensitivity, low smear, excellent anti-blooming, and high S/N ratio
  • Of high clear, rich and realistic color, high stability, and widely applicable to indoor, outdoor, day & night, automotive rear view, ect
  • Plug & play. Installs easily and is suitable DIY (Do it by Yourself)
  • Built-in an infrared illuminant to assist for cameras in low illumination environment
  • Have small volume, lightweight, high integrative level, easy and convenient fix and use
  • Long life luminary with using special wavelength infrared LED
  • Suitable for surveillance of supermarket ,mall, shop, resident area, bar and so on


1/3 Inch SONY CCD 480TVL 30 IR LED Waterproof Camera AVS-K608

  • It have small volume, lightweight, high integrative level, easy and convenient fix and use

How to Build Your Own Night Vision Camera:

  • Our eyes are tuned to see the visible spectrum of light, a term used to refer to light with wavelengths between 380 and 750 nanometers. Just because we cannot see any light at night does not mean that there is no light there. Infrared light---light with a wavelength longer than 750 nm---though invisible to the naked eye is visible to cameras. Digital cameras use a special filter to block this infrared light, but with a few modifications to your existing camera, you can build your own night vision camera capable of "seeing" and recording infrared
  • Select a digital still or video camera---including webcams---that you would like to modify to a night vision camera. The modification is irreversible and the camera will no longer be able to shoot normal color photos or videos. Film or tape cameras will not work, as neither standard film nor videotape will render infrared light correctly. You will need special film or tape to shoot infrared with a nondigital camera
  • Consult your camera's manual to determine the location of the camera's image sensor. It will be labeled either as a CCD or CMOS sensor
  • Open your camera, removing screws with your screwdriver if necessary. Even though you can expose a dSLR (digital single lens reflex) sensor by removing the lens, it will be necessary to remove the back of the camera to get to the infrared filter. Video cameras will also need to be opened to access their sensors. Webcams often must be pried apart if their components are attached with clips or glue
  • Remove the red-tinted glass that covers the sensor. This is the infrared filter. It will likely be attached to the camera or sensor in some way, so you will need to remove it without damaging the sensor or camera. You can usually slip your screwdriver between the filter and sensor and gently pry the filter off. Be careful to keep the screwdriver from scratching the sensor
  • Discard the infrared filter, and reassemble the camera. If you needed to break apart a glued component on a webcam, you can use an adhesive to reconnect the pieces. Digital still cameras and video cameras can be reassembled without replacing any parts
  • Take photos or video as usual, remembering that your camera is now capable of seeing more than your naked eye can. Because the modification occurs between the sensor and the lens, you will not be able to see the difference through your camera's eyepiece. Any digital display will show infrared light, however
  • Use your infrared flashlight to put more infrared light into your shot and make your subject even more visible. During the day, or when photographing living subjects---as organic material throws off much more infrared light than inorganic material---this flashlight is not necessary, but it will illuminate nonliving subjects at night without casting any visible light


  • To prevent fire or shock hazard, do not expose the unit to rain or moisture
  • The user will be required to correct the interference as his own expense if not install in accordance
  • Temperature of the work environment shall be between-10℃and 50℃
  • Do not open its cover of the pickup Camera. Otherwise its function of waterproof will be ineffective
  • Please the keeping glass surface clean . Otherwise it may make light sensor an expiration
  • Any changes or modifications in construction of this device which aren't expressly approved by the party responsible for compliance could void the user's authority to operate the equipment
  • Recommend to use a regulated DC 12V power supply unit with Camera for best picture and for safe operation of the unit
  • Please according to the technique parameter within the scope of rule the electric voltage area, electric current area usage

Package Included:

  • 1 x 1/3" SONY CCD 480TVL 30 IR LEDs Waterproof Camera