Home >> Security & Surveillance >> 1/3" SONY CCTV Wired Camera with Wireless Converter & Receiver Security System KT-401+WRC840+CM-263CW
All Categories

1/3" SONY CCTV Wired Camera with Wireless Converter & Receiver Security System KT-401+WRC840+CM-263CW


A One CCTV wired camera and One Wireless Converter and One Wireless Receiver Kit. The converter can transmit video signal by 2.4GHz frequency band. 7 inch TFT LCD 2.4GHz 4-channels wireless AV color monitor. 1/3 inch SONY color CCD wired camera.
Retail Price:
USD$ 391.98
Wholesale Price:
Wholesale Price
Quantity 2-45-910-29≥30
Price USD$ 167.35USD$ 158.54USD$ 149.73USD$ 137.98
TV Standard:
Power Adapter:
If you want to buy only 1 piece, please alter the quantity in ‘My Cart’.
Note: you could enjoy the wholesale price of this item as long as the item quantity of your order is more than 1.
  • For online wholesaler or distributor, you can buy directly online. If you want to buy more than offered quantities for better price, please click wholesale inquiry.

  • Top Selling
  • Overview



  • Transmission Power: 10mW/CE, 2mW/FCC
  • Power Supply: DC 12V
  • Consumption Current: 20mA (Max.)


  • Transmit video signal by 2.4GHz frequency band
  • With BNC connector plug
  • 4-channel available to avoid interference
  • Built-in microphone for Audio monitoring
  • Min. 100m transmission distance without block
  • Suitable for CCTV camera and other video devices
  • The converter, which designed for CCTV Camera with BNC plug. can convert the signal from CCTV Camera to wireless signal and send to the wireless receiver some where
  • With the ultra-small size of 39mm (W) x 35mm (D) x 33mm (H) of main body, the Camera could beused for discreet observation. Also it could be used for portable monitoring with Battery or Battery group
  • The product works at ISM-2.4GHz. When it is interfered by other wireless equipment at the same band. You could change the operation channel to avoid interference
  • The product achieves at least 100 meter transmission distance without block. According to the essential principle of electromagnetic wave, actual transmission distance may reduce by through the bemires such as wall, floor, and ceiling , etc.


  • Aspect Ration: 7 inch(16:9)
  • Display Element: Color TFT LCD
  • Video System: PAL/NTSC
  • Active Area: 154.08(mm) x 86.58(mm)
  • Resolution: 480(H) x RGB x 234(V)
  • Receiver Channel: 4 Channels
  • Brightness: 200cd/m²
  • Contrast Ratio: 300:1
  • Db Level: -90dB
  • Composite Video (AV): One-way AV input
  • OSD Language: English
  • Input Voltage: DC 12V
  • Max Power Consumption: ≤8W
  • Size: 190 x 143 mm / 7.48 x 5.63 in
  • 4 Receiver Channel: CH1: 2414MHz, CH1: 2432MHz, CH1: 2450MHz, CH1: 2468MHz


  • 7 inch TFT LCD 2.4GHz 4-channels wireless AV color monitor
  • PAL/NTSC System
  • Environmentally Friendly Design
  • Remote Control with Full Functions


  • Image Device: 1/3 inch SONY color CCD
  • TV System: PAL/NTSC
  • Effective Pixels: PAL: (H)500 x (V)582, NTSC: (H)510 x (V)492
  • Scanning System: NTSC:525 Lines.60 Field/Sec, PAL: 625 Lines 50 Field/Sec
  • Horizontal Resolution: 420 TV Line
  • Minimum Illumination: 0.5 Lux
  • S/N Ratio: More Than 46dB
  • Gamma Characteristic: 0.45
  • Video Output: 1Vp-p 75 Oms, Negative
  • Electronic Shutter: Pal: 1/50~1/100,000s ; NTSC:1/60~1/100,000s
  • White Balance: Auto
  • Built-In Lens: 3.6mm Board Lens
  • Operation Temperature: -10℃ ~ + 50℃, RH 95% Max
  • Storage Temperature: -20℃ ~ + 60℃, RH 95% Max  
  • Power Consumption: 12V +/- 10%DC,100mA
  • Dimension: 27 x 68mm/1.06 x 2.68in


  • 1/3 Inch Sony Color CCD wired camera
  • Horizontal resolution of 420TV Lines wired camera
  • Auto electronic shutter control wired camera
  • Auto back light compensation wired camera
  • Pinhole lens board lens & vari-focal lens
  • Advanced digital signal processing
  • DV-12V

Precautions of the Camera:

  • Recommend to use a regulated DC 12V power supply unit with camera for best picture and for safe operation of the unit. Unregulated DC 12V power supply usually provides around 17-20V after loaded and can cause a damage on the camera
  • Recommend to use the camera with the monitor which has the standard video input impedance level of 75Oms. If in any case your monitor is set to high impedance mode, please switch them on it or standard impedance position. If the monitor do not have the impedance adjust switch, please ask us for a camera suitable for your monitor
  • Do not attempt to disassemble the camera. There are no user serviceable parts inside. Refer servicing to qualified service personal
  • Never face the camera toward the sun. If may cause a smear on the picture when the camera is directly faced to the sun or spot light or light reflecting objects
  • Do not expose the camera to rain or moisture, or do not try to operate the camera in wet area. Moisture can damage the camera and can create the danger of electric shock



  • Camera set


  • Cylinder shaped


  • Front of camera monitor


  • Back of camera monitor


  • Size of camera monitor in detail


  • Front of camera converter


  • Back of camera converter

Package Included:

  • 1 x Camera
  • 1 x Converter
  • 1 x Receiver
  • 1 x Adapter
  • 1 x Cable
  • 1 x Remote Control