Home >> Security & Surveillance >> Surveillance Cameras >> Camean 1/3" SONY Color CCD 480TVL 0.8Lux CCTV Wired Waterproof Bullet Camera BU3482S-T36S

Camean 1/3" SONY Color CCD 480TVL 0.8Lux CCTV Wired Waterproof Bullet Camera BU3482S-T36S


Deluxe new 1/3 inch SONY chip, minimum illumination 0.8Lux, 480TV lines, waterproof, bullet style security CCTV wired super HAD CCD color camera with board lens, 1Vp-p 75 OHM composite video output. This high-quality camera is operational both indoor...
Retail Price:
USD$ 116.78
Wholesale Price:
Wholesale Price
Quantity 2-56-1415-39≥40
Price USD$ 71.56USD$ 62.29USD$ 53.02USD$ 40.66
TV Standard:
If you want to buy only 1 piece, please alter the quantity in ‘My Cart’.
Note: you could enjoy the wholesale price of this item as long as the item quantity of your order is more than 1.
  • For online wholesaler or distributor, you can buy directly online. If you want to buy more than offered quantities for better price, please click wholesale inquiry.

  • Top Selling
  • Overview


  • Image Sensor: 1/3" inch SONY Super HAD color CCD
  • Horizontal Resolution: 480TVL
  • Signal System: PAL / NTSC
  • Scanning Frequency: PAL ~ H: 15.625KHz, V: 50Hz, NTSC ~ H: 15.734KHz, V: 60Hz 
  • Picture Elements: PAL: 752(H) x 582(V), NTSC: 582(H) x 494(V)
  • Minimum Illumination: 0.8Lux
  • Electronic Shutter: 1/60 ~ 1/30000 Second
  • S/N Rate: More than 48dB
  • AGC: ON / OFF
  • BLC: ON / OFF
  • Electronic Iris: EE / AI
  • Video Output: 1Vp-p 75 ohm composite video
  • Supply Voltage: DC 12V
  • Power Consumptions: Less than 170mA
  • Lens: C/CS mount


  • Use SONY super HAD color CCD
  • Max. perform 480TV lines
  • Can use the board Lens and Pin-hole Lens
  • Waterproof and with Sunshield (optional)
  • Can make as silver or black color casing
  • Back focus adjustment function which make adjust the focus easily
  • The camera uses DC 12V, It can be installed and built into a system easily
  • 1/3" approx. 320,000Pixels (approx. 300.000pixels effective) IT-CCD for clear pictures without image lag or geometrical distortion. High-sensitivity design for a low-light sensitivity of 0.01Lux (F1.2) by using SONY EX view color CCD
  • Auto tracking white Balance adjustment
  • AGC function to automatically increase Camera's sensitivity when the level of ambient light drops
  • Internal synchromzation is designed the DC12V's type camera
  • The automatic electronic shutter adjusts speed automatically to provide correct exposure even if manual iris Lens is used
  • The built-in back light compensation function improves the image quality for backlighting subjects


Camean 1/3

  • Easily hidden for covert monitoring or can be mounted prominently on a wall

Camean 1/3

  •  You can rest assured you'll get crystal clear images

What are the recommended camera placements to capture the most relevant shots?

  • Never angle a camera to look straight down. A camera that's pointed straight down will only catch the top of a perpetrator's head. The camera will most likely miss many of the distinguishing characteristics that can be used to identify a person later if necessary
  • Always make sure to have a camera facing all entrances It is a fact, that the best time to catch the facial features of an individual is during their entrance into the building, whether it is your home or your business. Other cameras can catch the act of someone in the act of stealing; however, without the critical entry-shot you may not be able to identify the individual
  • Never allow direct sunlight to touch the lens of the camera. Regardless of which cameras you use, make sure that the cameras are never mounted in such a way that sunlight will directly shine into the lens. This will cause the Image sensor to discolor and fail. Direct sunlight will also immediately void any warranty
  • Mount I/R Cameras within 20 ft. of subject being viewed.  Infrared bulbs emit an invisible light spectrum that will illuminate a subject even in complete darkness...however, the light will only project out 20-40 ft. to illuminate the target
  • Always plug cameras into a surge suppressor or Battery Back-up unit. Cameras are extremely sensitive to voltage changes and can fail prematurely. Voltage changes will also void the cameras warranty


  • Since this camera contains an AGC circuit, the Sensitivity increases automatically in dark places. It is not a failure when the image looks grainy
  • If a high-intensity object (such as a lamp) is shot, the image on the screen may have vertical lines (smear) or blur (blooming). This is a characteristic of the CCD, and is not a defect
  • If an auto iris lens is used, set the iris to OFF. If set to ON, flickering may occur. If a manual iris lens is used. Set the IRIS to on
  • When used in hot places, vertical lines may appear on the screen of camera. This is a characteristic of the CCD and not a failure of the camera
  • The automatic tracking system may not function properly when shooting with non-standard lighting or lighting with a color temperature exceeds the capability of the Camera
  • If the camera object is a single solid color (other than white), the auto white circuit will normally attempt to change this color to white. In the case of this camera, if it cannot make a correct prediction, the previous white balance setting will be maintained until the subject color became more varied

Package Included:

  • 1 x 1/3" SONY CCTV Wired CCD Color Bullet Style Camera