Home >> Security & Surveillance >> Surveillance Cameras >> 1/4" IT EXVIEW HAD CCD IR Intelligent Constant-Speed Pan-Tilt 480TVL/600TVL Camera SAN-2AZR10PLT

1/4" IT EXVIEW HAD CCD IR Intelligent Constant-Speed Pan-Tilt 480TVL/600TVL Camera SAN-2AZR10PLT


For your own safety, security and-or secrecy, you probably have wished many times to be able to see through walls. At last, the latest technology has granted your wish. IR Intelligent Constant-Speed Pan-Tilt Camera SAN-2AZR10PLT has built-in automati...
Retail Price:
USD$ 1513.38
Wholesale Price:
Wholesale Price
Quantity 2-45-910-29≥30
Price USD$ 746.68USD$ 712.18USD$ 677.67USD$ 631.67
TV Standard:
If you want to buy only 1 piece, please alter the quantity in ‘My Cart’.
Note: you could enjoy the wholesale price of this item as long as the item quantity of your order is more than 1.
  • For online wholesaler or distributor, you can buy directly online. If you want to buy more than offered quantities for better price, please click wholesale inquiry.

  • Top Selling
  • Overview


  • Picture Element: 752(H) x 582(V)
  • Image Sensor: 1/4inch IT EXVIEW HAD CCD
  • Video Output: VBS 1.0Vp-p/75 ohm
  • White Balance: Auto/ Manual
  • Scan System: 15.625KHz(H) 50Hz(V)
  • Horizontal Resolution: 480TVL(colour), 600TVL(B/W)
  • S/N Ratio: ≥50dB
  • Electronic Shutter: 1/50~1/10,000s
  • Minimum Illumination: 0Lux
  • R/L Rotation Scope: 355°
  • Lens: (F=3.9~85.8mm) 16X Digital Zoom
  • LED: Dia. 10 x 70
  • IR Distance: 100m to 120m
  • Synchronization System: Internal Synchronization
  • R/L Speed: 6 degree/S
  • Up/Down Rotation Scope: +60 degree ~ -90 degree/S
  • Up/down Speed: 3.5degree/S
  • Presetting: 128
  • Iris & Zoom: Auto/ Manual
  • Power: AC24V or AC110~220V about 55W
  • Waterproof Level: IP65
  • System Temperature: -45℃ ~ +55℃
  • Two-filter design, image clearer
  • Such following problems have been thoroughly solved such as: mist on the traditional IR camera, picture reflect, can not reach the actual distance, over high temperature, useful Life are short and so on
  • Can not, the temperature is too high, and so on a range of issues
  • Shell design patent for the demolition, installation and maintenance
  • Built-in automatic heating system for high-cold regions
  • Day / night switch function can automatically switch from color to black and white mode model
  • Auto-focus lens
  • 128 preset positions
  • DNR (Digital Noise Reduction) function
  • Signal to noise ratio 50dB



  • Built-in automatic heating system for high-cold regions

What are the recommended camera placements to capture the most relevant shots?

  • Never angle a camera to look straight down. A camera that's pointed straight down will only catch the top of a perpetrator's head. The camera will most likely miss many of the distinguishing characteristics that can be used to identify a person later if necessary
  • Always make sure to have a camera facing all entrances It is a fact, that the best time to catch the facial features of an individual is during their entrance into the building, whether it is your home or your business. Other cameras can catch the act of someone in the act of stealing; however, without the critical entry-shot you may not be able to identify the individual
  • Never allow direct sunlight to touch the lens of the camera. Regardless of which cameras you use, make sure that the cameras are never mounted in such a way that sunlight will directly shine into the lens. This will cause the Image sensor to discolor and fail. Direct sunlight will also immediately void any warranty
  • Mount I/R Cameras within 20 ft. of subject being viewed.  Infrared bulbs emit an invisible light spectrum that will illuminate a subject even in complete darkness...however, the light will only project out 20-40 ft. to illuminate the target
  • Always plug cameras into a surge suppressor or Battery Back-up unit. Cameras are extremely sensitive to voltage changes and can fail prematurely. Voltage changes will also void the cameras warranty


  • Since this camera contains an AGC circuit, the Sensitivity increases automatically in dark places. It is not a failure when the image looks grainy
  • If a high-intensity object (such as a lamp) is shot, the image on the screen may have vertical lines (smear) or blur (blooming). This is a characteristic of the CCD, and is not a defect
  • If an auto iris lens is used, set the iris to OFF. If set to ON, flickering may occur. If a manual iris lens is used. Set the IRIS to on
  • When used in hot places, vertical lines may appear on the screen of camera. This is a characteristic of the CCD and not a failure of the camera
  • The automatic tracking system may not function properly when shooting with non-standard lighting or lighting with a color temperature exceeds the capability of the Camera
  • If the camera object is a single solid color (other than white), the auto white circuit will normally attempt to change this color to white. In the case of this camera, if it cannot make a correct prediction, the previous white balance setting will be maintained until the subject color became more varied

Package Included:

  • 1 x SHANNI IR Intelligent Constant-Speed Pan-Tilt Camera