Home >> Security & Surveillance >> Surveillance Accessories >> 1/4" SHARP 420TVL Color CCD Camera Main Board A200C

1/4" SHARP 420TVL Color CCD Camera Main Board A200C


1/4" SHARP 420TVL CCD Camera Board. 420 TV lines horizontal resolution. Effective pixels: PAL: (H) 500 x (V) 582, NTSC: (H) 510 x (V) 592, good choice for your security CCD camera. It's easy to install and use. It has been fully tested to ensure comp...
Retail Price:
USD$ 85.38
Wholesale Price:
Wholesale Price
Quantity 2-56-1415-39≥40
Price USD$ 37.22USD$ 35.50USD$ 33.77USD$ 31.48
TV Standard:
If you want to buy only 1 piece, please alter the quantity in ‘My Cart’.
Note: you could enjoy the wholesale price of this item as long as the item quantity of your order is more than 1.
  • For online wholesaler or distributor, you can buy directly online. If you want to buy more than offered quantities for better price, please click wholesale inquiry.

  • Top Selling
  • Overview


  • Imaging CCD: 1 / 4 Sharp Color CCD
  • Effective Pixels: PAL: (H) 500 x (V) 582, NTSC: (H) 510 x (V) 592
  • Scanning System: PAL: 625 Lines, 50 frames / sec, NTSC: 525 Lines, 60 frames / sec
  • Horizontal Resolution: 420 TV lines
  • Minimum Illumination: 1.0 Lux
  • Video Output: 1Vp-p -75 Ohm
  • Audio: No
  • Power Consumption: DC12V ± 10%, 115mA
  • White Balance: Auto
  • S/N Ration: >48dB
  • Gamma Characteristics: 0.45
  • Sync System: Internal
  • Electronic Shutter: PAL: 1 / 50 ~ 100,000 sec, NTSC: 1 / 60 ~ 100,000 sec
  • Temperature: -10 ℃ ~ +50 ℃, humidity of no more than 95%
  • Storage Temperature: -20 ℃ ~ +60 ℃, humidity of no more than 95%
  • Size: 18mm / 0.7in(Dia.)



  • 1/4inch SHARP Color CCD Camera Main Board

How to Clean a CCD Camera:

  • Plug the camera in. If the batteries were to die while you're cleaning, the camera will automatically close on your cleaning tools and will need expensive repairs
  • Read your camera's manual to find out how to lock the mirror and hold open the shutter. It may be a custom function on your camera, and your manual will describe how to do this. Each camera is slightly different
  • Use an air blower to blow air onto the mirror to clean off larger particles of dust. Do not stick the air blower inside the camera. If the camera closes, or the mirror moves, it will scratch it. A foot-powered air pump works well
  • Use a sensor brush to clean the camera's sensor. Only use a sensor brush if this is not the first time the camera has been cleaned. Move the brush gently from left to right, take it out and spray it off with the air brush, then stroke the sensor again. Repeat this until the sensor appears clean

Package Included:

  • 1 x 1/4" SHARP 420TVL Color CCD Camera Main Board