Home >> Security & Surveillance >> Surveillance Cameras >> 1/4" SHARP CCD CCTV 420TVL 1.0 Lux Dome Color Camera SYL-408

1/4" SHARP CCD CCTV 420TVL 1.0 Lux Dome Color Camera SYL-408


Brand new MINI 1/4 inch SHARP chip, 420TVL, wired dome mode ironbound blast shelter armor color CCD camera with 3.6mm broad lens. It is very easy to apply. High quality clear and sharp picture is available with this camera. No hesitation to try it!
Retail Price:
USD$ 75.98
Wholesale Price:
Wholesale Price
Quantity 2-56-1415-39≥40
Price USD$ 27.23USD$ 25.75USD$ 24.27USD$ 22.30
TV Standard:
If you want to buy only 1 piece, please alter the quantity in ‘My Cart’.
Note: you could enjoy the wholesale price of this item as long as the item quantity of your order is more than 1.
  • For online wholesaler or distributor, you can buy directly online. If you want to buy more than offered quantities for better price, please click wholesale inquiry.

  • Top Selling
  • Overview


  • Image Sensor: 1/4" SHARP Color CCD
  • Signal System: PAL/NTSC
  • Effective Pixel: PAL: 500(H) x 582(V); NTSC: 510(H) x 492(V)
  • Resolution: 420TVL
  • Minimum Illumination: 1.0LUX
  • S/N Ratio: ≥48dB
  • Lens: 3.6mm
  • Power Supply: DC12V
  • Video Output: 1.0Vp-p, 75ohm
  • Backlight Compensation: ON/OFF Switchable
  • Operation Temp: -10℃ ~ +50℃ RH95%Max
  • Storage Temp: 20℃ ~ +60℃ RH95%Max




How to Install a Wired Surveillance System:

  • Determine where you want the camera to point. Wired systems are commonly used with just one camera. Choose a high position for a perspective of the entire room
  • Consider installing a camera at your front door to see who is knocking without having to look through the peephole. Door surveillance is particularly useful in large homes and for people with mobility issues. Combine the system with an intercom for added convenience
  • Plug the cables into the recording device. You can use a dedicated DVR, a VCR or a computer to record the images from the camera
  • Run the cable (most wired surveillance systems use one cable for both power and signal) to your surveillance camera. Wires can be concealed beneath rugs or carpeting, within walls and behind furniture
  • Mount the camera. Cameras can be mounted on the walls or on the ceiling. It's usually as simple as drilling two holes and screwing in the camera mount
  • Test the line of sight and adjust the camera. Ask another person to watch the live broadcast from the camera as you adjust it to monitor some target. Lock the camera in position when you have it adjusted properly
  • Program when you want your recording device to record. Most computer-controlled surveillance systems allow you to either schedule a recording session or set the system to motion detection. The second alternative only records when motion is present in camera's line of sight


  • Recommend to use a regulated DC 12V power supply unit with camera for best picture and for safe operation of the unit. Unregulated DC 12V power supply usually provides around 17-20V after loaded and can cause a damage on the camera
  • Recommend to use the camera with the monitor which has the standard video input impedance level of 750ms.If in any case your monitor is set to high impedance mode, please switch them on it or standard impedance position. If the monitor do not have the impedance adjust switch, please ask us for a camera suitable for your monitor
  • Do not attempt to disassemble the camera. There are no user serviceable parts inside. Refer servicing to qualified service personal
  • Never face the camera toward the sun. If may cause a smear on the picture when the camera is directly faced to the sun or spot light or light reflecting objects
  • Do not expose the camera to rain or moisture, or do not try to operate the camera in wet area. Moisture can damage the camera and can create the danger of electric shock
  • Ironbound blast shelter armor

Package Included:

  • 1 x Mini 1/4 SHARP Wired Dome Mode Ironbound Blast Shelter Armor Color CCD Camera 
  • 1 x User's Manual