Home >> Security & Surveillance >> Surveillance Cameras >> 1/4" SHARP CCTV CCD 1Lux 420TVL Wired Color CCD Camera ES301CCD

1/4" SHARP CCTV CCD 1Lux 420TVL Wired Color CCD Camera ES301CCD


New 1/4 inch Sharp chip, 420TV lines, CCTV security wired color CCD camera, built in 3.6mm lens, Minimum illumination 1 lux, Video output 1.0 Vp-p 75ohm, power supply DC12V, dome indoor water-repellent and dustproof, electronic iris be used in a wide...
Retail Price:
USD$ 82.78
Wholesale Price:
Wholesale Price
Quantity 2-56-1415-39≥40
Price USD$ 31.18USD$ 29.62USD$ 28.05USD$ 25.97
TV Standard:
If you want to buy only 1 piece, please alter the quantity in ‘My Cart’.
Note: you could enjoy the wholesale price of this item as long as the item quantity of your order is more than 1.
  • For online wholesaler or distributor, you can buy directly online. If you want to buy more than offered quantities for better price, please click wholesale inquiry.

  • Top Selling
  • Overview


  • Image Device: 1/4 inch Sharp CCD Chip
  • Number of Pixels: PAL: 512(H) x 582 (V), NTSC: 512(H) x 492 (V)
  • Scanning System: PAL / NTSC
  • Sync System: Internal Synchronization
  • Horizontal Resolution: 420TV Lines
  • Usable Illumination: 1 Lux
  • S/N Ratio: More than 48dB
  • Camera Characteristic: 0.45
  • Electronic Shutter: PAL:1/50~1/100,000 S, NTSC: 1/60~1/100,000 S
  • Video Output: 1.0 Vp-p 75ohms, Negative
  • Power Consumption: 12V±10% DC, 120mA
  • Built-in Lens: 3.6mm Lens/F1.5
  • Supply+12V DC to power & video output automatically makes video out signal available
  • Electronic iris can be used in applications with a wide spectrum of lighting
  • Angle of view is determined according to lens type in use (Standard: 3.6mm lens)



  • Dome cameras offer several advantages when used as part of home security systems


  • The detail of this camera

How to Install a Dome Camera in a Home Security System:

  • Select the location where you would like to install the dome camera
  • Drill holes to install the mounting bracket
  • Insert the camera into the dome and connect wiring, if necessary
  • Adjust the camera to the correct position
  • Test the dome camera to make sure it is working properly

How to Clean a Dome Camera:

  • Apply Lexan cleaning solution liberally to the washable mitt. Gently wring out the washable mitt.
  • Attach the washable mitt to the mitt holder. Attach the mitt holder to the extension pole.
  • Grasp the pole and lift the end with the mitt up toward the dome camera.
  • Cradle the dome of the dome camera with the mitt so that the mitt surrounds the entire dome.
  • Rotate the pole clockwise so that the mitt rotates around the dome of the security dome camera. Reverse direction and rotate the mitt counterclockwise. Remove the mitt. Let the dome camera dry.
  • Reapply Lexan cleaning solution to the washable mitt. Repeat the cleaning process of rotating the mitt clockwise and then counterclockwise on the dome of the dome camera. Remove the mitt and let the dome camera dry.
  • Remove the mitt holder from the extension pole. Remove the washable mitt from the mitt holder. Clean the washable mitt in cold water and let it dry.

Package Included:

  • 1 x 1/4 Inch Sharp Wired CCD DOME Color CCTV Camera