Home >> Security & Surveillance >> Shingarun 1/4" SHARP Color CMOS 420 TVL 9 Lights CCTV Wired Underwater Camera & 7" LCD Monitor CR110-7AM20
All Categories

Shingarun 1/4" SHARP Color CMOS 420 TVL 9 Lights CCTV Wired Underwater Camera & 7" LCD Monitor CR110-7AM20


What you are viewing is a portable 1/4" SHARP Color CMOS 420 TVL 9 Lights CCTV Wired Underwater Camera & 7" LCD Monitor, if you want to know better situation under water when fishing; this wired underwater camera system comes to be your best choi...
Retail Price:
USD$ 395.38
Wholesale Price:
Wholesale Price
Quantity 2-45-910-29≥30
Price USD$ 243.44USD$ 221.17USD$ 198.90USD$ 169.20
Power Adapter:
If you want to buy only 1 piece, please alter the quantity in ‘My Cart’.
Note: you could enjoy the wholesale price of this item as long as the item quantity of your order is more than 1.
  • For online wholesaler or distributor, you can buy directly online. If you want to buy more than offered quantities for better price, please click wholesale inquiry.

  • Top Selling
  • Overview


  • Underwater camera is designed to connect to your TV, VCR, LCD TV or some Digital Video Camera/Camcorders with an A/V Input
  • Have provided "Gender Adaptors" in the case that your Digital Video Camera cannot accept male RCA plugs
  • The Underwatercam is ideal for use on your home TV or VCR (when using Underwatercam in the pool) or can be used on TV's found on cruise or dive boats, 12V portable VCRs or LCD Monitors (with RCA Input).
  • Show children what goes on at the bottom of the sea, lake, fishpond or aquarium
  • Look down wells and tanks or search dams, rivers and flooded mine shafts. Search sink holes, look down pipe or large drain holes for missing pets or children. Marine departments can check for damage, inspect boats or search for wrecks
  • Farmers can use Underwatercam to inspect the bottom of wells, tanks and dams
  • Use Underwatercam to check drains and pipes for root/branches/leaf clogs and blockages


  • Vision: TFT
  • Display Made: 16:9
  • System: PAL/NTSC
  • Video Input: 1Vp-p 75Ω
  • Consuming Power: <9.5W
  • Power: DC 12V
  • Resolution: 480(W) x RGB x 234(H)
  • Operating Temperature: -10 ℃ ~ +50 ℃
  • Storage Temperature: -20 ℃ ~ +60 ℃


  • Input Voltage: DC 12V
  • Image Sensor: 1/4 Sharp Color CMOS
  • Pixel Resolution: PAL: 500 x 582, NTSC: 512 x 492
  • Electronic Shutter: 1/60~1/5000 Sec
  • Lens Angular Field of View: 60 Degree
  • Cable Length: 20m
  • Effective Focal Length: 6mm, 9 Light
  • Maximum Relative Aperture: F/2.0
  • Resolution: 420 TV Lines
  • Video Signal Output: 1V(p-p) Composite Video Signal at 75ohm Termination
  • Power Consumption: 1 Watt
  • S/N Ratio: 40dB
  • Packaging Material: High Impact ABS Plastic
  • Operating Temperature: -50℉~+160℉
  • Humidity: 100% Condensing


  • 7-inch TFT LCD underwater Video System
  • 60deg Camera Vision Angle
  • Video Input terminal
  • Easy carrying Plastic case
  • 12V DC operation
  • Optional CMOS Camera
  • Waterproof Camera Cabinet
  • Rechargeable Battery
  • Optional 20m Cable
  • Infrared 0 Lux Night Vision
  • 3 Ways Power Supply: AC110/220V, 60/50Hz AC Adaptor (with Adaptor), DC12V-15V Car/boat cord,  Battery power supply (rechargeable Batteries included)
  • Horizontal Resolution: 420TV lines


Shingarun 1/4

  • This is a 1/4 Inch SHARP Color CMOS 420 TVL 9 Lights CCTV Wired Underwater Camera & 7 Inch LCD Monitor

Shingarun 1/4

  • The monitor features 480(W) x RGB x 234(H) resolution, provides you clear pictures

Shingarun 1/4

  • 1/4 Inch SHARP Color CMOS 420 TVL 9 Lights CCTV Wired Underwater Camera

Shingarun 1/4

  • With the 20m cable, you can use the CCTV underwater camera system easily

Shingarun 1/4

  • Box design, it is easy and convenient to take the wired underwater camera system with you

Shingarun 1/4

  • Provide all the accessories which you need, the CCTV underwater camera system is plug and play 

How to Clean an Underwater Camera:

  • As you learn how to clean an underwater camera, make sure to inspect all cover doors regularly, including the ones for the battery and USB port. These should be free from debris and anything else which may allow water to leak into the underwater camera
  • Remove any dirt or debris with a soft, lint free cloth. Take care to also remove any drops of water with the same type of cloth. This should be done both before and after each use
  • Inspect visually all waterproof casings and seals, to make sure that there are no cracks or tears. Make sure that all doors close properly, and that the camera is not damaged in any way. If there is visible damage, do not use the camera underwater until the casings are replaced
  • Fill the bucket with fresh water, making sure that it is free from any salt or other chemicals, as this could cause damage to the camera
  • Close all doors on the camera, making sure that it is securely sealed. Immerse it into the bucket, with the lens facing downwards
  • Open and close the lens cover a number of times, this is usually done by pressing the power button. This will make sure that any dirt or other obstructions are removed, preventing the lens cover from becoming stuck or damaged
  • Remove the underwater camera from the bucket of water and gently shake off any excess liquid. Dry it using a clean cloth, then leave to air dry with all of the doors open. Now you know how to clean an underwater camera

Tips & Warnings:

  • It is recommended that the waterproofing seals on any underwater camera are checked, and usually replaced, every year. This helps to maintain the waterproof feature and reduce risk of damage
  • Do not use any cleaning chemicals on your camera, as this could compromise the waterproofing features. Make sure that the water which you use is clean and fresh, free from salt and other substances. Make sure that you do not pour cold water directly onto it; it is safer to gently immerse into a bucket
  • Avoid leaving your underwater camera in water for prolonged periods of time, as this also deteriorates both the appearance of the camera, and its waterproofing abilities


  • Check switch on "OFF" position (button on high position), input power DC12V/500mA
  • Connect Video signal
  • Push switch on "ON" position (button on low position)
  • Adjust Color and Bright knob at best result
  • Adjust screw on the frame at the best degree
  • Select to reverse picture in accordance with installment situation and usage need. Picture up/down/left/right, can be adjust by Remote Controller or keyon Monitor


  • Please read the following manual details before using
  • Pay attention to damp proof for the high resolution
  • Don't break the LCD screen surface, and clean the surface by soft cloth if the screen dirty
  • Don't dismantle the unit by unprofessional
  • Push the unit L/R switch if find the Letter Reverse
  • Install the bottom side of the outer shell or inner side chamfer by customer's self-selection in accordance with bed frame


  • The Camera must not be located to look directly into the sun or any other bright light source as this will not only result in a poor image, but will eventually damage the electronics of the Camera
  • Areas with a high degree of contrast in the light levels require careful positioning of the camera to obtain the best image
  • The best viewing angle is achieved by placing the Camera in a position where it is looking down on the subject
  • Additional lighting may be required if water quality is poor, or in low light conditions
  • The Camera has been tested underwater to a depth of 18 Meters. Any use below this depth will void the Camera's warranty
  • Always wash the Camera in warm water and soap after use, to remove salt and other corrosive agents
  • Always use appropriate water safety precautions when operating the Underwater Camera, and ensure appropriate level of supervision of children when near water

Package Included:

  • 1 x 7" inch Color TFT LCD Monitor
  • 1 x Underwater Camera with Cable
  • 1 x DC 12V Battery Charger
  • 1 x 12V Sealed Lead-Acid Rechargeable Battery (Optional)
  • 1 x Connector (for Battery charging only)
  • 1 x Remote Control