Home >> Security & Surveillance >> Surveillance Cameras >> 1/4inch SHARP Chip 420 TVL Infrared Vidicon CCTV CCD Camera ES909CCD

1/4inch SHARP Chip 420 TVL Infrared Vidicon CCTV CCD Camera ES909CCD


This SHARP camera for keeping an eye on your home or business. Our engineers design them not only with the best quality, but also with some unique features. Newest high impedance, sensitivity continuously adjustable, 1/4 inch Sharp chip, 420 TV lines...
Retail Price:
USD$ 121.38
Wholesale Price:
Wholesale Price
Quantity 2-56-1415-39≥40
Price USD$ 41.70USD$ 39.19USD$ 36.67USD$ 33.31
TV Standard:
If you want to buy only 1 piece, please alter the quantity in ‘My Cart’.
Note: you could enjoy the wholesale price of this item as long as the item quantity of your order is more than 1.
  • For online wholesaler or distributor, you can buy directly online. If you want to buy more than offered quantities for better price, please click wholesale inquiry.

  • Top Selling
  • Overview

Camera Specifications:

  • Camera Apparatus: 1/4 inch Sharp CCD
  • System: PAL / CCIR, NTSC / EIA
  • Validity Pixel: PAL: 628 x 582, NTSC: 510 x 492
  • Picture Area: PAL: 5.78 x 4.19mm, NTSC: 4.69 x 3.45mm
  • Horizontal Definition: 420 Line
  • Minimum Illumination: 1LUX / F 1.2
  • Scan Frequency: PAL / CCIR: 50Hz, NTSC / EIA: 60Hz
  • Sensitivity: +18DB -AGL ON-OFF
  • Voltage: DC -12V
  • Current: 500mA
  • Power Consumption: <=640MW

Lens Specifications:

  • Range: 3.5-8mm
  • Metering Method: Peak-average adjustable method
  • Input Voltage & Current: DC 8V-16V & 35mA or less
  • Input Signal: Video signal (VS or V)
  • Iris Accuracy: Iris accuracy: +/- 15% at video signal level
  • Sensitivity Adjustment: Video signal level 0.5 to 1.0Vp-p,Continuously adjustable
  • Input Impedance: High impedance
  • Iris Response Time: Approximately 1.5 seconds in overall range
  • Application Temperature Range: 14 F to 122 F


1/4inch SHARP Chip 420 TVL Infrared Vidicon CCTV CCD Camera ES909CCD

  • Our engineers design them not only with the best quality, but also with some unique features

How to Clean a CCD Camera:

  • Plug the camera in. If the batteries were to die while you're cleaning, the camera will automatically close on your cleaning tools and will need expensive repairs
  • Read your camera's manual to find out how to lock the mirror and hold open the shutter. It may be a custom function on your camera, and your manual will describe how to do this. Each camera is slightly different
  • Use an air blower to blow air onto the mirror to clean off larger particles of dust. Do not stick the air blower inside the camera. If the camera closes, or the mirror moves, it will scratch it. A foot-powered air pump works well
  • Use a sensor brush to clean the camera's sensor. Only use a sensor brush if this is not the first time the camera has been cleaned. Move the brush gently from left to right, take it out and spray it off with the air brush, then stroke the sensor again. Repeat this until the sensor appears clean

Notes on Installation and Usage:

  • Users should not disassemble the camera from the front direction
  • Always handle the camera with care. Please do not apply a shock or vibration as much as possible and take cautions not to cause damage or make a scratch on the camera due to careless storage
  • Please do not install the camera with the rainy place or high humid areas. And do not operate the camera in the wet place
  • Do not clean the camera body with the strong abrasives or soaps. When the camera becomes dirty. Clean it with the dry rugs. Especially make sure to use dedicated rugs for lens to clean the dome cover
  • Please select the camera in the cool are that is not exposed to the direct sunlight. if you do it can cause bad effects on the product

Package Included:

  • 1 x 1/4 inch Sharp Chip, 420 TV Lines, Infrared Vidicon Security CCTV Wired CCD Color Camera