Home >> Security & Surveillance >> Home Alarm >> Zrabra 12 DC Wireless Remote Control Switch Security System YU-02A+036F-02

Zrabra 12 DC Wireless Remote Control Switch Security System YU-02A+036F-02

SKU:A1485000CW

What are you viewing is a 12 DC Wireless Remote Control Switch Security System which is widely used and plays an important role in our daily life because it is time-saving.We need this Remote Control Switch to help us to finish some operation in our ...
Retail Price:
USD$ 16.65
Wholesale Price:
 
Wholesale Price
Quantity 2-78-1920-49≥50
Price USD$ 6.88USD$ 6.55USD$ 6.22USD$ 5.77
 
Qty:
pieces
If you want to buy only 1 piece, please alter the quantity in ‘My Cart’.
Note: you could enjoy the wholesale price of this item as long as the item quantity of your order is more than 1.
  • For online wholesaler or distributor, you can buy directly online. If you want to buy more than offered quantities for better price, please click wholesale inquiry.

  • Top Selling
 
  • Overview

Specifications:

Control Switch Board:


  • Operating Voltage: DC 12V
  • Max. Load: 7A
  • Working Frequency: 315MHz / 433MHz
  • Sensitivity: -100dB 
  • Encoding Type: Fixed Code
  • Output Mode: Two switch signal
  • Size: 50 x 70 x 18mm / 1.97 x 2.76 x 0.71 in
  • The Wireless Remote Control Switch with IC block is convenient to replace functions

Remote Control:


  • Working Voltage: DC 12V (23A/12V battery) 
  • Working Current: 10mA
  • Power: 10mW
  • Modulation: ASK
  • Transmission Frequency: 315MHz / 433MHz  
  • Oscillation Resistance: 4.7MΩ / 3.3MΩ
  • Transmission Distance: 200m
  • Encoding Type: Fixed code
  • Color: Black

Details:

Zrabra 12 DC Wireless Remote Control Switch Security System YU-02A+036F-02


  • This Remote Control Security System can be used in family, car, motorcycle, garage, burglar alarm and industrial control and security, etc

Zrabra 12 DC Wireless Remote Control Switch Security System YU-02A+036F-02


  • This Remote Control Switch Security System is widely used and plays an important role in our daily life

Zrabra 12 DC Wireless Remote Control Switch Security System YU-02A+036F-02


Zrabra 12 DC Wireless Remote Control Switch Security System YU-02A+036F-02


Zrabra 12 DC Wireless Remote Control Switch Security System YU-02A+036F-02


  • The encoding type of the Remote Control Switch board and remote control is fixed code, the transmission distance is 200m which can pass through walls

How to Build a Remote Control:


  • Open the remote control housing and place a push button switch on the side. In the upper right corner of the housing, fasten a 3-volt battery holder. Be sure enough room is available to install and remove the battery
  • Run a wire from the push button switch and link to the 3-volt battery holder at the negative connection. Attach another wire to the push button switch and lead it to the Meg 1/4W resistor and the NPN silicon transistor. Run a third wire from the Meg 1/4W resistor and attach it to the 22K 1/4W resistor and and the PNP silicon transistor
  • Position the infra-red LED on the front of the housing. Attach the LED and run wires to both transistors. From the 22K 1/4W resistor, run a wire to the C220.01uF 16v ceramic disk capacitor. Run another wire between the NPN silicon transistor and the ceramic disk capacitor
  • From the positive connector on the 3-volt battery holder, connect a wire to the PNP silicon transistor. This will allow for proper current flow in a closed circuit. Ensure the push button switch is positioned to "off" and place a 3-volt battery into the holder. Close the remote control housing
  • Point the remote control at a receiver, making sure the LED on the control is aimed at the LED of the receiver. Push the button and the receiver should power on and off. To adjust the receiver to be programmed, point the remote control and hold down the push button switch. Adjust the pot or taper on the receiver until you hear a click. This links the remote control and the receiver

Package Included:


  • 1 x Control Switch Board
  • 1 x Remote Control