- Model No.: S1H-DC09 / S1H-DC12 / S1H-DC24
- Channel: 1 CH
- Control Modes: Latched, Momentary, Toggle, Momentary + Toggle
- Coding Type：Fixed code
- Coding Setting: Learning code
- Power Supply (Operating Voltage): DC12V±1V (S1H-DC12), DC9V±1V (S1H-DC09), DC24V±1V (S1H-DC24)
- Working Voltage Range of Relay: AC110~240V or DC0~28V
- Case size: 95mm x 40mm x 24mm
- Static Current: ≤6mA
- Output Current: ≤3 A
- Maximum Working Current: 4A / each channel
- Model No.: CV-12
- Channel: 12 CH
- Remote Control Distance: 500m / 1500ft (theoretically)
- Encode: Fixed code by soldering
- Unit size: 110mm x 50mm x 18mm
- Power Supply: 1 x 23A -12V battery (included, can be used for 12 months)
- Wireless control, easy to install
- Control Lights, Motors, Fans, electrically operated Doors/ Locks/ Windows/ Blinds/ Cars or Other Appliances with voltage AC110~240V or DC0~28V.
- You can turn on/ off the receiver with transmitter (remote control) from any place within a reliable distance, the wireless signal can pass through walls, floors and doors.
- Reliable control: The transmitter (Encoding) and the receiver (Decoding) use an 8-bit code.
- One 12-key transmitter can control 12 single-channel receivers.
- If you use two or more sets in the same place, you can set them with different codes.
- Transmitting Frequency: 315MHz / 433MHz
Button 1~12 of the transmitter is corresponding to the receiver D-1 ~ D-12.
- Setting control mode Latched: press button 1 of the transmitter.
Control mode Latched (D-1 ~ D-12): Press -> On; Press other button -> Off.
D-1 ~ D-4 are interlocked; D-5 ~ D-8 are interlocked; D-9 ~ D-12 are interlocked.
Press button 1 -> Receiver D-1 On;Press button 2/3/4 -> D-1 Off.
- Setting control mode Momentary: press button 2 of the transmitter.
Control mode Momentary (D-1 ~ D-12): Press and hold -> On; Release -> Off.
Press button 1 and hold -> Receiver D-1 On;Release button 1 -> D-1 Off
- Setting control mode Toggle: press button 4 of the transmitter.
Control mode Toggle (D-1 ~ D-12): Press -> On; Press again -> Off.
Press button 1 -> Receiver D-1 On;Press button 1 again -> D-1 Off.
- Setting method of control mode Momentary + Toggle: press button 8 of the transmitter.
Control mode Momentary (D-1 ~ D-6): Press and hold -> On; Release -> Off.
Control mode Toggle (D-7 ~ D-12): Press -> On; Press again -> Off.
- 12 x Receiver: S1H-DC09 / S1H-DC12 / S1H-DC24 (1 Channel / 4 Control Modes)
- 1 x Transmitter: CV-12
- 1 x User manual