Home >> Security & Surveillance >> Surveillance Accessories >> 16 Channels UTP Active Video Receiver XYL-A-1610R

16 Channels UTP Active Video Receiver XYL-A-1610R


16 Channels active video receiver. This device is capable of receiving video signal over UTP cable. It is the best choice for you! The provides signal conditioning in the form of ground lifting, distance, and transient protection. The unparalleled in...
Retail Price:
USD$ 247.38
Wholesale Price:
Wholesale Price
Quantity 2-45-910-29≥30
Price USD$ 122.81USD$ 117.45USD$ 112.08USD$ 104.93
If you want to buy only 1 piece, please alter the quantity in ‘My Cart’.
Note: you could enjoy the wholesale price of this item as long as the item quantity of your order is more than 1.
  • For online wholesaler or distributor, you can buy directly online. If you want to buy more than offered quantities for better price, please click wholesale inquiry.

  • Top Selling
  • Overview


  • Spec: 16CH active
  • Video Frequency Respons: DC-6Mhz common-mode/differential-mode Rejection:15Khz 6Mhz 60dB typ
  • Audio/data: NO
  • Power: DC 12V
  • Impedance: Coax, male BNC: 75ΩUTP(screwless) terminal block or UTP RJ45 data connector:100Ω
  • Wire Type: One unshielded twisted pair 24-16AWG(0.5-1.31mm) per video signal: DC loop resistance 52 ohms per 1,000 ft(18 ohms per 100m)
  • Surge Suppression: 6000V 1.2μ S*5μ S
  • Control: Brightness and sharpness
  • UTP Port: RJ45(1610J terminal block)
  • Dimensions(mm): 432 x 185 x 44mm
  • Environment Temperature: -10~+50℃ humidity:0~95%


16 Channels UTP Active Video Receiver XYL-A-1610R

  • Perfect for larger CCTV installations where port density and camera number growth are prevalent

How to Hook Up a Receiver to a Video Plug:

  • Pull the receiver and other components out far enough so you can check the connection jacks on the back of each. Find matching connection jacks on each component and receiver to select the best cable to use. A six-sided jack labeled HDMI is the best connection for HDTV, followed by component video with a red, green and blue plug on each end. The round S-video jack with pin holes inside is the best connection for an analog video device, such as a tube-type TV. If S-video is unavailable use a composite video cable with a single RCA plug on each end
  • Push in the plug on one end of the video cable straight into the corresponding output jack on the rear of the AV receiver. The distinctive shape of the HDMI and S-video plug makes it necessary to align the plug with the jack outline for a proper connection
  • Connect the other end of the cable to the matching video input jack on a TV, for example
  • Connect a video cable from the output jack on a source device, such as a satellite receiver or Blu-ray player, to the input jack labeled for that device on the rear of your receiver

Package Included:

  • 1 x 16 Channels Active Video Receiver