Home >> Security & Surveillance >> Surveillance Accessories >> Harxsh 2.4GHz 4 Channel 2.5inch TFT LCD Wireless AV Receiver JS928

Harxsh 2.4GHz 4 Channel 2.5inch TFT LCD Wireless AV Receiver JS928


To transform clear audio and video signal from the living room DVD / digital TV set-top boxes to the other audio signal TV which is in the other room and to watch wonderful movies with your family. 2.4G Wireless 2.5 inch TFT LCD 4CH AV receiver with ...
Retail Price:
USD$ 259.38
Wholesale Price:
Wholesale Price
Quantity 2-45-910-29≥30
Price USD$ 111.76USD$ 107.51USD$ 103.26USD$ 97.58
Power Adapter:
If you want to buy only 1 piece, please alter the quantity in ‘My Cart’.
Note: you could enjoy the wholesale price of this item as long as the item quantity of your order is more than 1.
  • For online wholesaler or distributor, you can buy directly online. If you want to buy more than offered quantities for better price, please click wholesale inquiry.

  • Top Selling
  • Overview


  • Display Screen: LCD screen, AUO 2.5 inches
  • Color Arrangement: RGB Delta
  • Luminance: 250cd/m2
  • Contrast: 200:1
  • System: PAL; NTSC
  • Video Format: Mpeg-4,AVI (640 or 320 @ 30fps) MP3,Wav
  • Recording: AVI format Mpeg-4 video support both PAL and NTSC
  • Built-in Memory: 64MB
  • Memory Support: SD:16M-4GB
  • 2.4GHz wireless A/V receiver
  • MPEG-4 recorder player, photo browser
  • Small palm size of receiver for mobile usage
  • 2.5" TFT LCD screen with 882 x 228 resolution
  • Rechargeable li-battery for wireless receiver
  • 4 channel available for multi-camera working
  • Built-in microphone for audio monitoring
  • Support high speed 2.0USB. Support OTG
  • Support U Disk SD MMS HDD Storage
  • Suitable for monitoring children and elders, and widely used for theft prevention, after-hours surveillance, home security, etc
  • Support record format AVI, Audio Format MP3, MPEG-1, MPEG-4, AVI, ASF, ADPCM


Harxsh 2.4GHz 4 Channel 2.5inch TFT LCD Wireless AV Receiver JS928

  • AV Receiver, Small size, light weight, low power consumption, High sensitivity 

How to Connect Wireless Between a Computer & a Receiver?

  • With the advancement of technology, new gadgets come out every day
  • One of best and brightest is the USB wireless audio adapter
  • This unit connects your computer system to your stereo receiver, without the burden of extra cables
  • The product provides a wireless receiver that picks up the audio transmission from a USB device plugged into your computer
  • It takes that signal, converts it to a usable format, and sends the audio to your stereo speakers via cables. Set-up is a piece of cake  


  • Purchase a USB wireless audio sender/receiver
  • Locate and connect the USB sender unit to your USB port on your computer. Take the unit and plug it into the USB port
  • Let your operating system detect the new hardware and install the drivers
  • Plug the receiver into an electrical wall socket near your stereo. This process will depend on the unit you purchased. Some units will connect directly to the socket. Others will have a cord that plugs into the receiver and then into the electrical socket
  • Insert the provided cables into the jack of the receiver. Most units will be color-coded if there is more then one jack. If you are unsure what goes where, check the instruction that came with the product
  • Plug the other end of the cables, now inserted into the receiver, into the input jacks on your stereo. Again, more than likely the cables are color-coded but check the manual if you are unsure. You are looking for the RCA input port on your stereo receiver
  • Turn the receiver on if necessary. The receiver may take a few minutes to pick up the varying signals
  • Turn the stereo on if necessary. The two units, stereo and computer, should be linked now. Test it out and play some music on your computer

Package Included:

  • 1 x 2.4G Wireless 2.5 inch TFT LCD 4CH Receiver
  • 1 x Stereo Earphone
  • 1 x USB Cable
  • 1 x OTG Cable
  • 1 x Power Adapter
  • 1 x AV Cable