Home >> Security & Surveillance >> Harxsh 2.4GHz 4 Channel Real-time Wireless Receiver & 4 IR CCD Cameras WRC815+TX800+S-3002F
All Categories

Harxsh 2.4GHz 4 Channel Real-time Wireless Receiver & 4 IR CCD Cameras WRC815+TX800+S-3002F


This is a set of real-time wireless receiver and transmitter supervision system. The appearance of the receiver is beautiful and the channels of these four cameras can be changed by hand or automatically. The camera has the function of backlight comp...
Retail Price:
USD$ 499.98
Wholesale Price:
Wholesale Price
Quantity 2-45-910-29≥30
Price USD$ 206.85USD$ 195.55USD$ 184.26USD$ 169.20
TV Standard:
If you want to buy only 1 piece, please alter the quantity in ‘My Cart’.
Note: you could enjoy the wholesale price of this item as long as the item quantity of your order is more than 1.
  • For online wholesaler or distributor, you can buy directly online. If you want to buy more than offered quantities for better price, please click wholesale inquiry.

  • Top Selling
  • Overview


Transmitter Specifications:

  • Transmission Frequency: ISM 2.414~2.468 GHz
  • Transmission Power: 10mW/CE; 2mW/FCC
  • Unobstructed Effective Range: 300m/1500m (Min.)
  • Modulation Mode: FM
  • Operating Temperature: -10~50/+14~+122°C/°F
  • Operating Humidity: 85%RH

Receiver Specifications:

  • Receiving Frequency: ISM 2,400 ~ 2,483MHz
  • Intermediate Frequency: 480 MHz
  • Frequency Stabilization: + 100 KHz
  • Demodulation Mode: FM
  • Antenna: 50 ohm SMA
  • Receiving Sensitivity: <=-85dBm
  • Video Output: 1Vp-p @ 75 ohm, S/N >38dB
  • Audio Output: 1Vp-p @600 ohms
  • Operation Temperature: -10 ~ +50 / +14 ~ +122˚C / ˚F
  • Operation Humidity: 22°C/°F 85%RH


  • Transmit video signal by 2.4GHz frequency band
  • With BNC connector plug
  • 4-channel available to avoid interference
  • Built-in microphone for audio monitoring
  • Min. 300m transmission distance without block
  • Suitable for CCTV camera and other video devices
  • 4-channel real-time wireless receiver, alloyed shell, antenna can be changed by yourself


  • Image Sensor: 1/4 SHARP CCD
  • TV System: PAL/NTSC
  • Effective Pixels: PAL: 500(H) x 582(V) NTSC: 510(H) x 492(V)
  • Horizontal Resolution: 420 TV Line
  • IR LED: 24 PCS
  • Sync System: Internal synchronization
  • Usable Illumination: 0.000LUx/F1.2 (LED on)
  • S/N Ratio: More than 48dB(AGC Off)
  • Gamma Characteristic: 0.45
  • Video Output: 1Vp-p 75 Oms, Negative
  • Scanning System: PAL:625 lines 50 Field/sec,NTSC:525 lines 60 Field/sec
  • Electronic Shutter Time: PAL 1/50-100,000Sec,NTSC 1/60-1/100,000Sec
  • Operation Temperature: -10℃ ~ + 50℃, RH 95% Max
  • Storage Temperature: -20℃ ~ + 60℃, RH 95% Max
  • White Balance: Auto
  • Power Supply: 12V +/- 10%DC,400mA
  • Lens: 3.6mm


  • SHARP 1/4 inch CCD
  • Horizontal resolution of 420TV Lines
  • Auto electronic shutter control
  • Auto back light compensation
  • Advanced digital signal processing
  • DV-12V


  • Recommend to use a regulated DC 12V power supply unit with camera for best picture and for safe operation of the unit. Unregulated DC 12V power supply usually provides around 17-20V after loaded and can cause a damage to the camera
  • Recommend to use the camera with the monitor which has the standard video input impedance level of 750ms. If in any case your monitor is set to high impedance mode, please switch it on standard impedance position. If the monitor do not have the impedance adjust switch, please ask us for a camera which is suitable for your monitor
  • Do not attempt to disassemble the camera. There are no user serviceable parts inside. Refer servicing to qualified service personal
  • Never face the camera toward the sun. It may cause a smear on the picture when the camera is directly faced to the sun or spot light or light reflecting objects
  • Do not expose the camera to rain or moisture, or do not try to operate the camera in wet area. Moisture can damage the camera and can create the danger of electric shock

Package Included:

  • 1 x 2.4GHz, 4-channel Real-time Wireless Receiver
  • 4 x 1/4 SHARP CCD Camera
  • 1 x Remote Controller
  • 4 x Converters