Home >> Security & Surveillance >> Home Alarm >> 266MHz-433MHz Wireless Remote Control Switch System AK-RK08-12+AK3000-8

266MHz-433MHz Wireless Remote Control Switch System AK-RK08-12+AK3000-8

SKU:A1485000HV

Wonderful wireless remote control system for home appliance! Just take a remote controller and you can easily control all electrical appliances at home, moreover, the wireless switch system is easy install and use conveniently! The wireless remote co...
Retail Price:
USD$ 62.78
Wholesale Price:
 
Wholesale Price
Quantity 2-56-1415-39≥40
Price USD$ 35.37USD$ 30.11USD$ 24.84USD$ 17.83
 
Qty:
pieces
If you want to buy only 1 piece, please alter the quantity in ‘My Cart’.
Note: you could enjoy the wholesale price of this item as long as the item quantity of your order is more than 1.
  • For online wholesaler or distributor, you can buy directly online. If you want to buy more than offered quantities for better price, please click wholesale inquiry.

  • Top Selling
 
  • Overview

Specifications:

Remote Control:


  • Working Volt: DC9V
  • Working Current: 100mA
  • Emissive Frequency: 315 MHz 433MHz
  • Code Type: Fixed code
  • Dimension: 127 x 41 x 20mm / 5.00 x 1.61 x 0.78in (L x W x H)

Control Switch System:


  • Operating Voltage: DC6V-24V
  • Operating Frequency: 266~433MHz
  • Receiver Sensitivity: -90dBm
  • Maximum Load: 5A
  • Code Type: Fixed code
  • Output Status: Jog / interlock / self-locking
  • Size: 95 x 55 x 17mm / 3.74 x 2.16 x 0.66in (L x W x H)

Details:

266MHz-433MHz Wireless Remote Control Switch System AK-RK08-12+AK3000-8


  • 266MHz-433MHz Wireless Remote Control Switch System, give your house best care

266MHz-433MHz Wireless Remote Control Switch System AK-RK08-12+AK3000-8 


  • With the remote control, it is easy and convenient to use the wireless remote control system

266MHz-433MHz Wireless Remote Control Switch System AK-RK08-12+AK3000-8 


  • The wireless switch system is widely applied in anti-theft system and remote control system

266MHz-433MHz Wireless Remote Control Switch System AK-RK08-12+AK3000-8


  • Wonderful wireless remote control system  for home appliance 

266MHz-433MHz Wireless Remote Control Switch System AK-RK08-12+AK3000-8


266MHz-433MHz Wireless Remote Control Switch System AK-RK08-12+AK3000-8


  • Made of high quality material, the wireless remote control system is durable and reliable for long time use

Application:


  • Remote control, remote measurement and remote sensing
  • Anti-theft alarm signal receiving and various remote controls for home-appliances

How Do Remote Controls Work?


  • Generally, there are two types of remote controls: infrared (IR), and radio frequency (RF). Infrared remote controls work by sending pulses of infrared light to a device, while RF remote controls use radio waves in much the same way. Pragmatically, the biggest difference between the two is range. IR remote controls require a clear line of sight to the receiving device and their range maxes out at about 30 feet (9.14 meters). RF remote controls can go through walls and around corners, with a range of roughly 100 feet (30.48 meters)
  • Most home entertainment components such as stereos, televisions and home entertainment centers use IR remote controls. The remote contains an internal circuit board, processor, and one or two Light Emitting Diodes (LEDs)
  • When you push a button on a remote control, it transmits a corresponding code to the receiving device by way of LED infrared pulses. The idea is somewhat akin to flashing an SOS signal, but instead of letters, the flashing LED light is transmitting a series of 1s and 0s. The "1" might be represented by a long flash, while "0," a short flash. A receiver, built into the component, receives the pulses of light and a processor decodes the flashes into the digital bits required to activate the function
  • Along with the desired function, remote controls must also piggyback other data. Firstly, they transmit the code for the device they are controlling. This lets the IR receiver in the component know that the IR signals it is picking up are intended for it. It essentially tells the component to start listening. The function data follows, capped by a stop command to tell the IR device go back into passive mode
  • Some remote controls can be very finicky, requiring the user point the remote directly at the component. This is due to a weak transmitter. Changing the batteries can help, but if the transmitter itself is poor, pulses are transmitted in a narrow beam. More robust IR transmitters, and remote controls with double LEDs, transmit broader beams that allow the user to point the remote in the general direction of the transmitter
  • Sometimes it happens that a recliner or favorite spot on the couch does not have a clear line-of-sight to the entertainment center or television. Often a coffee table or some other object is in the way. When this happens we find ourselves raising an arm, trying to control the object "around" the device. This can get quite annoying, but there's an easy alternative
  • Since light bounces off objects it is sometimes more convenient to point remote controls towards a flanking wall or even the ceiling to change a channel or send a function command. The light will bounce off the surface of the wall or ceiling and scatter. If you bounce it at an advantageous angle, the scattering light will reach the component. Often it's easiest, with elbow resting on an armrest, to flip your wrist back and point the remote up at a wall behind you. This can work quite well, even though the remote is pointing in the exact opposite direction of the component. Once you find the easiest sweet spots around the room from which to bounce your signal, you can use these instead of struggling with trying to get around your obstructed line of sight
  • Garage door openers, alarm systems, key fobs and radio-controlled toys use RF remote controls. RF remote controls work essentially the same as IR remote controls, except they use radio waves. As stated, radio waves can also penetrate walls and go around objects and corners, making RF arguably more convenient than IR
  • Some high-end entertainment systems come with RF remote controls for expanded remote range. There are also IR-to-RF remote control converters that allow IR remote controls to extend their range through utilizing a RF translator that basically acts as a middleman. The RF converter relays the IR signal in RF waves to get it further. The converter on the component side reverts the RF signal back to IR so the component can understand it
  • Most home entertainment components such as stereos, televisions and home entertainment centers use IR remote controls. The remote contains an internal circuit board, processor, and one or two Light Emitting Diodes (LEDs)
  • When you push a button on a remote control, it transmits a corresponding code to the receiving device by way of LED infrared pulses. The idea is somewhat akin to flashing an SOS signal, but instead of letters, the flashing LED light is transmitting a series of 1s and 0s. The "1" might be represented by a long flash, while "0," a short flash. A receiver, built into the component, receives the pulses of light and a processor decodes the flashes into the digital bits required to activate the function
  • Along with the desired function, remote controls must also piggyback other data. Firstly, they transmit the code for the device they are controlling. This lets the IR receiver in the component know that the IR signals it is picking up are intended for it. It essentially tells the component to start listening. The function data follows, capped by a stop command to tell the IR device go back into passive mode
  • Some remote controls can be very finicky, requiring the user point the remote directly at the component. This is due to a weak transmitter. Changing the batteries can help, but if the transmitter itself is poor, pulses are transmitted in a narrow beam. More robust IR transmitters, and remote controls with double LEDs, transmit broader beams that allow the user to point the remote in the general direction of the transmitter
  • Sometimes it happens that a recliner or favorite spot on the couch does not have a clear line-of-sight to the entertainment center or television. Often a coffee table or some other object is in the way. When this happens we find ourselves raising an arm, trying to control the object "around" the device. This can get quite annoying, but there's an easy alternative
  • Since light bounces off objects it is sometimes more convenient to point remote controls towards a flanking wall or even the ceiling to change a channel or send a function command. The light will bounce off the surface of the wall or ceiling and scatter. If you bounce it at an advantageous angle, the scattering light will reach the component. Often it's easiest, with elbow resting on an armrest, to flip your wrist back and point the remote up at a wall behind you. This can work quite well, even though the remote is pointing in the exact opposite direction of the component. Once you find the easiest sweet spots around the room from which to bounce your signal, you can use these instead of struggling with trying to get around your obstructed line of sight
  • Garage door openers, alarm systems, key fobs and radio-controlled toys use RF remote controls. RF remote controls work essentially the same as IR remote controls, except they use radio waves. As stated, radio waves can also penetrate walls and go around objects and corners, making RF arguably more convenient than IR
  • Some high-end entertainment systems come with RF remote controls for expanded remote range. There are also IR-to-RF remote control converters that allow IR remote controls to extend their range through utilizing a RF translator that basically acts as a middleman. The RF converter relays the IR signal in RF waves to get it further. The converter on the component side reverts the RF signal back to IR so the component can understand it

How to Reset a Remote Control:


266MHz-433MHz Wireless Remote Control Switch System AK-RK08-12+AK3000-8

If you want to add another remote control for your garage door opener or need to replace a dead battery and reprogram an existing remote, chances are you'll have to reset the opener with the base unit for it to work. The process involves just a few steps and is relatively easy to do


  • Replace the battery by opening the remote, taking out the old one(s) and putting in the new one(s). Make sure you buy the right battery for your remote. Match the battery type, size and voltage that came with the remote
  • Use a step ladder to access the garage door motorized unit, usually equipped with a safety light. Locate the reset or "learn" button on the unit. Many times, this small button is recessed, so you might need a pen or pencil to reach it
  • Push the reset or "learn" button on the opener. While the reset indicator light is blinking for about 30 seconds, point your remote at the opener, then press and hold the remote button that opens the door, and the reset light should stop blinking and glow steady to indicate the controller and opener are now synchronized. If the process doesn't work the first time, try again to make sure you pressed your button during the time when the indicator light is blinking

Package Included:


  • 1 x Remote Control Switch
  • 1 x Remote Controller