- The LED Auto Brake Lamp makes your car stand out
- Soft flexible lights are perfect for curved mirror surfaces
- The Car Turning Lamp is easy to assemble and long-lasting
- Low energy doesn't zap your power supply
- The LED Auto Brake Lamp is heatproof and waterproof, simple to install
- Power: 0.15W
- Working Voltage: DC 12V
- LED Color: Yellow
- LED Number: 27
- This LED Car Turning Lamp is installed in electricity system and very practical as car lights
- The Auto Brake Lamp is made with 27 super bright LEDs which are easy to assemble and long-lasting
- And the Car Turning Lamp is slim and dependable performance and can be set easily to fit the place you like without damage
- Let people notice your car especially in the dark so as to avoid car accident and keep a safe driving
- The Car Turning Lamp is heatproof and waterproof, simple to install, so what are you still waiting for
How to Replace a Tail, Brake or Reverse Light?
Replacing a dead bulb on your car is almost as easy as replacing a light bulb at home. Perform this simple maintenance and avoid the hassle of receiving a citation for a missing brake light.
- Determine how the bulb is accessed: On some models the lens (the red or white plastic part over the light) must be unscrewed from the outside, and on others the bulb is accessible only from inside the trunk. If there are no screws on the lens, you can assume that the bulb must be replaced from inside. Usually there will be a plastic cover that must be removed in order to access the bulb. There may be tabs, screws or small knobs that hold this plastic cover in place.
- Unscrew the lens on the outside, or take off the plastic cover from inside the trunk, to reveal the bulb.
- Unscrew the bulb. You'll have to push in and turn at the same time.
- Take the bulb with you to the auto supply store to help you find an exact duplicate.
- Clean the connection with a wire brush and/or wipe it clean with a rag if there's any corrosion.
- Screw the new bulb into the empty socket. Again, you'll have to push in and turn simultaneously. Line up the tiny raised bumps on the base of the bulb in order to screw it in.
- Replace the lens or the plastic cover.
- Test your work by stepping on the brakes and turning on the headlights while a friend watches the new bulb to make sure it lights up
- 2 x Car Turning / Brake Lamps