Home >> Car & Motorcycle Accessories >> Car Parts >> 3.5Inch TFT LCD Car Rear View Monitor & 1/3in Color CMOS 420TVL Camera ET-350

3.5Inch TFT LCD Car Rear View Monitor & 1/3in Color CMOS 420TVL Camera ET-350

SKU:A1399000AG

If you are looking for a great rear view system to your nice car, you have just got the perfect place. I highly recommend this car 420TVL camera ET-350 rear view monitor to you. With this rear view system in your car, you can drive and back your car ...
Retail Price:
USD$ 133.98
Wholesale Price:
 
Wholesale Price
Quantity 2-56-1415-39≥40
Price USD$ 72.78USD$ 60.88USD$ 48.98USD$ 33.11
 
Qty:
pieces
If you want to buy only 1 piece, please alter the quantity in ‘My Cart’.
Note: you could enjoy the wholesale price of this item as long as the item quantity of your order is more than 1.
  • For online wholesaler or distributor, you can buy directly online. If you want to buy more than offered quantities for better price, please click wholesale inquiry.

  • Top Selling
 
  • Overview

Specifications:

Monitor:


  • Pixel: 480 x 234
  • Dot Pitch: 0.107 x 0.370
  • Contrast: 400:1
  • Brightness: 400cd/m2
  • Response Time(ms): 10/30 (Tr/Tf) ms
  • Viewing Angle: 65/65/65/50 (L/R/U/D)
  • Video Input: 1VP-P 75Ω
  • Power Supply: DC 12V ±10%
  • Power Consumption: About 7W
  • Lamp Life Time: 20,000 hours

Camera:


  • Image Device: 1/3-inch color CMOS OV7949
  • TV System: PAL/NTSC
  • Effective Pixels: 628 x 582x pixels /510 x 492 pixels
  • Sensing Area: 5.78mm x 4.19mm/4.69mm x 3.54mm
  • Sync. System: Internal
  • Resolution: 420 TV lines
  • Mininum illumination: 3Lux/F1.2(0 Lux when infrared LED on)
  • Lens: 3.6mm /92deg
  • Night Vision Range: 6m
  • S/N Ratio: More than 48db
  • Electronic Shutter: 1/60 - 1/15,000 seconds
  • Video Output: RAC connector, 1.0vp-p, 70ohm
  • Current Consumption: 130mA
  • Power Supply: 12 V DC
  • Operating Temperature: -20 to 50 degree centigrade, RH95%, Max
  • Storage Temperature: -30 to 60 degree centigrade, RH95%, Max
  • Other Items: Automatic white Balance, AGC & BLC
  • Size: 26 x 38mm/1.1 x 1.5 in (Dia. x L)

Features:


  • 480 x 234 pixel monitor and good car rear view camera ensures you to see images clearly 
  • Made of high quality material, this rear view monitor is durable for long time use
  • The small size makes the rear view system easy to install and does not take up your car space
  • The rear view camera can take pictures clearly to provide to the rear view monitor
  • This parking aid helps to prevent dangerous and costly collisions
  • The car rear view monitor has the function of automatic backing up
  • You can send the car rear view monitor to your best friend if he needs one
  • The car camera ET-350 rear view monitor in our store can be your first choice among other ones

Details:

3.5Inch TFT LCD Car Rear View Monitor & 1/3in Color CMOS 420TVL Camera ET-350


  • This car reversing rear view system will help you have a back view when you park your car  

3.5Inch TFT LCD Car Rear View Monitor & 1/3in Color CMOS 420TVL Camera ET-350


3.5Inch TFT LCD Car Rear View Monitor & 1/3in Color CMOS 420TVL Camera ET-350


  • The big 3.5inch screen can display the back view clearly to you to help you park the car 

3.5Inch TFT LCD Car Rear View Monitor & 1/3in Color CMOS 420TVL Camera ET-350


  • The camera is of high definition, which can provide you with clear image

3.5Inch TFT LCD Car Rear View Monitor & 1/3in Color CMOS 420TVL Camera ET-350


3.5Inch TFT LCD Car Rear View Monitor & 1/3in Color CMOS 420TVL Camera ET-350


3.5Inch TFT LCD Car Rear View Monitor & 1/3in Color CMOS 420TVL Camera ET-350


3.5Inch TFT LCD Car Rear View Monitor & 1/3in Color CMOS 420TVL Camera ET-350


  • Installation of the cable is simple and can be directly pluged into your system

How to Install a Rear-View Camera in Your Car:

3.5Inch TFT LCD Car Rear View Monitor & 1/3in Color CMOS 420TVL Camera ET-350


Rear-view cameras are especially useful in tight parking lots, dark areas or in places where children might be running around. You can install as many of these cameras as you want, though one or two is usually enough


Instructions:


  • Disconnect the battery cables from the battery. Check the vehicle's repair manual to find out what size wrench to use. Leave the disconnected cables a safe distance from the battery posts
  • Decide where you want to install the rear-view camera. Most people put them in the plastic bumper so they don't have to drill into the car's sheet metal
  • Drill a hole for the camera. Check the installation instructions to see what size drill bit to use. Don't make the hole too large or the camera will fall out
  • Place the camera in the hole using the rubber grommet supplied with the camera. Make sure the camera and grommet are tight
  • Attach the camera's power wire to the backup-light power wire on your car. You'll have to splice the wires together. Use wire cutters to cut the wires, leaving enough excess wire to reconnect. Strip the ends of the wire to expose the bare wire using wire strippers. Splice the wires together using a two-into-one connector. This will give the rear-view camera power when you put the car in reverse
  • Route the camera's output wire to the rear-view monitor and connect the wire to the monitor's input. For installation of the monitor, see the monitor's installation instructions
  • Reconnect the battery, start the car and put the car in reverse. The rear-view monitor should turn on and give you a view of what's behind you

Tips & Warnings:


  • Don't rely solely on the rear-view camera when backing up. Use it as a supplementary aid
  • You must have the rear-view monitor set up and installed correctly to receive the video signal from the rear-view camera
  • Don't install the camera (or any electrical device) with the battery connected, or you'll risk a severe electric shock

How to Connect a Rear View Camera:

3.5Inch TFT LCD Car Rear View Monitor & 1/3in Color CMOS 420TVL Camera ET-350


  • Remove the plastic or carpet panel on the inside of the trunk behind the license plate and below the trunk lid. If your vehicle is an SUV (sport utility vehicle) or something similar, expose the innards inside the tailgate
  • Mount the camera. Remove the two license plate bolts and insert them through the camera bolt holes and back onto the car. Use the license plate light hole to push the wiring through to the trunk
  • Run the red and white cable from the camera you have mounted on the license plate frame to a reversing light housing inside the vehicle. The license plate light can provide a convenient hole, or simply drill a new hole and weatherize it with a grommet
  • Trim and strip 1/4 inch of plastic sheathing off the end of the wire at the reversing light housing
  • Identify the vehicle wires that provide power to the reversing lights. Identify them by tracing the wiring back from the reversing light bulb connector. Strip 1/4- inch of plastic sheathing off the wire. This should be at a convenient, easy to reach location--the middle is fine. Wrap the camera wires around the reversing light wires, match red to red and black to black. Seal with electrical tape
  • Attach the display monitor to a convenient position on the dashboard. Use the included hook and loop tape. Plug the power supply from the display monitor into the cigarette lighter plug on the vehicle's dashboard
  • Test and then replace the plastic or carpet panel

Package Included:


  • 1 x Monitor
  • 1 x Camera
  • 2 x Connect Cables
  • 1 x Video Conncet Cable