Home >> Car & Motorcycle Accessories >> Car Parts >> LSD 3.5" TFT Screen Car Rearview Monitor with 1/3" Color CMOS 420TVL Camera ST-350

LSD 3.5" TFT Screen Car Rearview Monitor with 1/3" Color CMOS 420TVL Camera ST-350


What you are viewing is a 3.5" TFT Screen Car Rearview Monitor with 1/3" Color CMOS 420TVL Camera, to add video to your vehicle for more convenient backup, this Car Rear View Camera is the best choice for you!The car rear view monitor set features ea...
Retail Price:
USD$ 121.98
Wholesale Price:
Wholesale Price
Quantity 2-56-1415-39≥40
Price USD$ 69.20USD$ 58.35USD$ 47.51USD$ 33.04
If you want to buy only 1 piece, please alter the quantity in ‘My Cart’.
Note: you could enjoy the wholesale price of this item as long as the item quantity of your order is more than 1.
  • For online wholesaler or distributor, you can buy directly online. If you want to buy more than offered quantities for better price, please click wholesale inquiry.

  • Top Selling
  • Overview



  • RCA video input
  • Speaker built-in
  • Ratio: 4:3 TFT screen
  • Pixel: 480 x 234
  • Video Input Signal: 1.0Vp-p, composite
  • Power Input: DC 12V
  • Power Consumption: Approx. 4W


  • Image Sensor: OV 7949 1/3" COLOR CMOS
  • Horizontal Resolution: 420 TVL
  • Effective Pixels: PAL: 628 x 586, NTSC: 510 x 496
  • Min. Illumination: 0.1Lux (IR ON) 
  • Signal System: PAL/NTSC
  • Video Output: 1.0Vpp.at 75ohm
  • Power Supply: DC 12V <130mA(IR ON)
  • Operating Temperature: -20℃~70℃


LSD 3.5

  • Slim 3.5in TFT screen car rear view monitor and 1/3in color CMOS 420TVL camera

LSD 3.5

LSD 3.5

  • High Definition car rear view monitor set, features 480 x 234 resolution

LSD 3.5

LSD 3.5

  • The Rear View Car Camera is especially useful in tight parking lots

LSD 3.5

  • Provides all the accessories here, easy and convenient to install the Car Rear View Camera


  • Connect the yellow video jack with monitor video input jack
  • Connect the red(or black) power input jack with power supply


  • Recommend using a regulated DC12V power supply unit with camera for the best picture and for safe operation of the unit
  • Do not cut the power input jack and connect the conductor to power supply directly, because that will fatally injured the camera. If you have to connect the conductor, please use our cable in accessories
  • Do not attempt to disassemble the camera. There are no user serviceable part s inside. Refer servicing to qualified service person 

How to Install a Rearview Mirror Monitor in Your Car:

  • Disconnect the battery cables from the battery before beginning installation. Use a wrench or socket to remove the battery cables. Check the vehicle's repair guide for the proper wrench or socket size.
  • Remove the original rearview mirror from your car. Leave its mounting bracket on the windshield-you'll attach the rearview mirror monitor to this. Check the rearview mirror's mounting screw to see what size screwdriver you'll need
  • Insert the Car Rear View Monitor Set into the existing mounting bracket on your windshield. Use the bolt supplied with the monitor to secure the device in the mounting bracket
  • Route an A/V power cable from the A/V selector box to the monitor. Connect the A/V cable from the Car Rear View Monitor Set to the A/V power cable. Use cable ties to secure the cables and prevent them from hanging
  • Reconnect the battery. Start your vehicle and select the rearview mirror monitor on the A/V selector box. The video monitor should come on if the rearview mirror monitor is correctly installed

How to Install a Rear-View Camera in Your Car:

LSD 3.5

Rear-view cameras are especially useful in tight parking lots, dark areas or in places where children might be running around. You can install as many of these cameras as you want, though one or two is usually enough

  • Disconnect the battery cables from the battery. Check the vehicle's repair manual to find out what size wrench to use. Leave the disconnected cables a safe distance from the battery posts
  • Decide where you want to install the rear-view camera. Most people put them in the plastic bumper so they don't have to drill into the car's sheet metal
  • Drill a hole for the camera. Check the installation instructions to see what size drill bit to use. Don't make the hole too large or the camera will fall out
  • Place the camera in the hole using the rubber grommet supplied with the camera. Make sure the camera and grommet are tight
  • Attach the camera's power wire to the backup-light power wire on your car. You'll have to splice the wires together. Use wire cutters to cut the wires, leaving enough excess wire to reconnect. Strip the ends of the wire to expose the bare wire using wire strippers. Splice the wires together using a two-into-one connector. This will give the rear-view camera power when you put the car in reverse
  • Route the camera's output wire to the rear-view monitor and connect the wire to the monitor's input. For installation of the monitor, see the monitor's installation instructions
  • Reconnect the battery, start the car and put the car in reverse. The rear-view monitor should turn on and give you a view of what's behind you

Tips & Warnings:

LSD 3.5

  • Don't rely solely on the rear-view camera when backing up. Use it as a supplementary aid
  • You must have the rear-view monitor set up and installed correctly to receive the video signal from the rear-view camera
  • Don't install the camera (or any electrical device) with the battery connected, or you'll risk a severe electric shock

Package Included:

  • 1 x 3.5in Rearview Mirror Monitor
  • 1 x Convert Cable
  • 1 x LCD Remote Controller
  • 1 x Camera
  • 1 x AV Cable