Home >> Security & Surveillance >> 2.4GHz 4 Channel Receiver & 4 CMOS Wireless Cameras Security System WRC840-CAM4
All Categories

2.4GHz 4 Channel Receiver & 4 CMOS Wireless Cameras Security System WRC840-CAM4

SKU:A1222000CC

Stock:1
This Receiver Camera Kit is one of lower cost of wireless home security system. This Receiver Camera Kit is not only support the 2.4G wireless receiver (4channel selectable) and wired A/V out, but also supports Detect and LCD. The Receiver Camera Kit...
Retail Price:
USD$ 276.83
Wholesale Price:
 
Wholesale Price
Quantity 2-45-910-29≥30
Price USD$ 201.51USD$ 178.92USD$ 156.32USD$ 126.19
 
TV Standard:
Power Adapter:
Qty:
pieces
If you want to buy only 1 piece, please alter the quantity in ‘My Cart’.
Note: you could enjoy the wholesale price of this item as long as the item quantity of your order is more than 1.
  • For online wholesaler or distributor, you can buy directly online. If you want to buy more than offered quantities for better price, please click wholesale inquiry.

  • Top Selling
 
  • Overview

Specifications:


2.4GHz 4 Channel Receiver & 4 CMOS Wireless Cameras Security System WRC840-CAM4


  • This Receiver Camera Kit switches the receiver's channels by remote control
  • This Receiver Camera Kit has 380 TVL of horizontal definition
  • This Receiver Camera Kit is easy for installation
  • This Receiver Camera Kit with 4 channels exchangeble by auto & manual
  • 100m transmission distance without block
  • Audio monitoring with microphone in camera
  • Unlike many other infrared cameras, this Wireless Receiver Camera Kit is completely wireless

420 TVL Camera:



  • TV System: PAL/NTSC
  • Validity Pixel: PAL: 628(H) x 582(V); NTSC: 510(H) x 492(V)
  • Image Device: Vimicro 0702 vision CMOS
  • Horizontal Definition: 420 TV lines
  • Angular Field of View: 45˚ (f=6mm)
  • Minimum Illumination: 0 Lux
  • Night Vision Range: 8m
  • IR LEDs: 9 IR LEDs
  • Band Width: 20M
  • Synchronization System: Internal
  • Scanning Frequency (H): PAL: 15.625 KHz; NTSC: 15.734 KHz
  • Scanning Frequency (V): PAL: 50Hz; NTSC: 60Hz
  • Backlight Compensation: Auto
  • Electronic Shutter: 1/50(1/60) ~ 1/100,000 sec
  • White Balance: Auto
  • S/N Ratio: >48db
  • Gamma Correction: >0.45
  • Operation Temperature: -10˚C ~ +50˚C / +14˚F ~ +122˚F
  • Transmission Frequency: ISM 2,400 ~ 2,483MHz
  • Power Supply: DC +12V

2.4GHz 4 Channel Receiver & 4 CMOS Wireless Cameras Security System WRC840-CAM4


  • With a adapter

2.4GHz 4 Channel Receiver & 4 CMOS Wireless Cameras Security System WRC840-CAM4


  • 9 IR LEDs 420 TVL Camera

380 TVL Camera:


  • TV System: PAL/NTSC
  • Validity Pixel: PAL: 628(H) x 582(V); NTSC: 510(H) x 492(V)
  • Image Device: Vimicro 0702 vision CMOS
  • Horizontal Definition: 380 TV lines
  • Angular Field of View: 45˚ (f=6mm)
  • Minimum Illumination: 0 Lux
  • Night Vision Range: 8m
  • Band Width: 20M
  • IR LEDs: 9 IR LEDs
  • Synchronization System: Internal
  • Scanning Frequency (H): PAL: 15.625 KHz; NTSC: 15.734 KHz
  • Scanning Frequency (V): PAL: 50Hz; NTSC: 60Hz
  • Backlight Compensation: Auto
  • Electronic Shutter: 1/50(1/60) ~ 1/100,000 sec
  • White Balance: Auto
  • S/N Ratio: >48db
  • Gamma Correction: >0.45
  • Operation Temperature: -10˚C ~ +50˚C / +14˚F ~ +122˚F
  • Transmission Frequency: ISM 2,400 ~ 2,483MHz
  • Power Supply: DC +12V

The Problems And The Solutions:


  • The indicator of the channel display window is not lighting. Check whether the socket of the power adapter works well or not, and make sure the power switch is turning on
  • The receiver cannot receive picture or the picture-received flashes
  • Please check whether the wireless camera have already put through the power
  • Whether the distance between wireless camera and receiver is too far or whether there is electromagnetic shielding barrier between wireless camera and receiver (eg: Building of steel structure will make much hindrance to transmitting signal)
  • In the range of receiving, don't make two wireless cameras with the same frequency work at the same time, otherwise they will cause interfering
  • When the transmitting cameras of different frequency work at the same time, the distance between the cameras should be kept about or over 2 meters, otherwise receiving will be interfered
  • If there are high-power transmission signals with the same Frequency and car-mounted radio working around, they will cause

Receiver:


  • Aspect Ration: 7 inch (16:9)
  • Display Element: Color TFT LCD
  • Video System: PAL/NTSC
  • Active Area: 154.08(mm) x 86.58(mm)
  • Resolution: 480(H) x RGB x 234(V)
  • Receiver Channel: 4 channels
  • Brightness: 200cd/㎡
  • Contrast Ratio: 300:1
  • Db Level: -90dB
  • Composite Video (AV): One-way AV input
  • OSD Language: English
  • Input Voltage: DC 12V
  • Max Power Consumption: ≤8W

2.4GHz 4 Channel Receiver & 4 CMOS Wireless Cameras Security System WRC840-CAM4


  • 7 inch digital color TFT LCD monitor

2.4GHz 4 Channel Receiver & 4 CMOS Wireless Cameras Security System WRC840-CAM4


  • With bracket 

2.4GHz 4 Channel Receiver & 4 CMOS Wireless Cameras Security System WRC840-CAM4


  • With a Remote Control

How to Use Wireless Camera Receivers?

2.4GHz 4 Channel Receiver & 4 CMOS Wireless Cameras Security System WRC840-CAM4

A wireless camera receiver receives all video input from your wireless video camera and allows you to view the video from your computer or TV monitor. Before you can use the wireless camera receiver, however, you have to make sure that the wireless camera as well as the receiver itself is properly installed and configured.

Instructions:

1.
Connect the wireless camera receiver into a USB port in your computer. When the computer recognizes the device, you will be asked to insert the installation disc that comes with the device. Do so and follow the installation instructions on your screen to install the wireless camera receiver device driver. Reboot the computer.
2. Check if the driver was installed correctly. Click "Start" and type "device manager" in the search box. Click "Device Manager" among the list of options that appear.
3. Click the arrow button beside "Sound, video and game controllers" and see if the name of the wireless camera receiver you just installed is included in the list. If it is not included or if the name has a yellow question mark beside it, you will need to uninstall the driver and repeat the driver installation.
4. Run the wireless camera receiver software to start seeing the video inputs in your computer.


Package Included:


  • 1 x Monitor
  • 2 x 420 TVL Cameras
  • 2 x 380 TVL Cameras
  • 2 x Adapters
  • 1 x Remote Control