Home >> Car & Motorcycle Accessories >> Car Parts >> 7Inch LCD Car Rear View Monitor with COMS Camera RPAS

7Inch LCD Car Rear View Monitor with COMS Camera RPAS

SKU:A1399000CB

If you are looking for a great rear view camera system for your car, you have just got the perfect place. Here I highly recommend this 7inch car reversing rear view camera system to you. Just stop for several seconds, you will get what you want....
Retail Price:
USD$ 219.98
Wholesale Price:
 
Wholesale Price
Quantity 2-45-910-29≥30
Price USD$ 128.24USD$ 109.58USD$ 90.91USD$ 66.02
 
  • Top Selling
 
  • Overview

Specifications:

Camera:


  • Image Senser: 1/3 Color CMOS
  • Horizontal Resolution: 400TVL 
  • Total Pixels: PAL: 628 x 586 NTSC: 510 x 496
  • Mini Lumination: <0.5Lux
  • Lens: 3.6mm/2.8mm
  • Power Supply: DC12V
  • Operation Temperature: -20°C ~ +70°C
  • Auto Gain Control: On/Off
  • Video Output: 1.0Vpp at 75ohm
  • Auto Iris: 1/5-1/6000
  • S/N: Ratio: >48dB
  • Signal System: PAL/NTSC
  • Effective Pixels: PAL: 628 x 586 NTSC:656 x 492
  • Sensing Area: PAL: 5.96 x 4.28mm NTSC:4.08 x 3.1mm
  • Gamma Characteristics: 0.45
  • Audio Output: 325mV/2.7Kohm
  • Infrared Power On/Off: Auto
  • Night-Vision Range: 2Ft-65Ft
  • Cable Length: 1Ft-60Ft

Monitor:


  • Name of the Unit: 7" inch TFT LCD TV
  • Receiving Channel: VHF-L: CH 1 ~ 549.75MHz ~ 91.75MHz VHF-H: CH6 ~ 12 168.25MHz ~ 222.75MHz UHF: CH 13 ~ 57 471.25MHz ~ 869.75MHz
  • CATV Fully Augmented Channel: Z1-Z7: 112.25MHz ~ 166.75MHz Z8-Z35: 224.25MHz ~ 46.75MHz
  • Display Components: TFT-LCD
  • Color System: Multi-system PAL/NTSC/SECAM (optional)
  • Audio Output: 350mW (maximum)
  • Connection Terminal: External Antenna input Jack, A/V Input Jack, Earphone Jack, Power Input Jack
  • Power Consumption: About 10W

Features:


  •  This rear view camera system will help you to have a back view to park your car safely
  • Car reversing color rear view camera security system is designed with car rear view camera and monitor security system
  • This camera rear view is made of good material and durable to use a long time for car owners
  • The big screen can give you a clear back view and make you convenient to park your car
  • Each detail is paid attention and to ensure that every process without any defect 
  • A must-have for any car owners to ensure the security of your car and yourself
  • This rear view camera is a good gift to new drivers

Details:

7Inch LCD Car Rear View Monitor with COMS Camera RPAS


  • This car reversing color rear view camera security system will help you to have a back view when you park your car
  • The screen has a large vision and can give you clear informations about the back view

7Inch LCD Car Rear View Monitor with COMS Camera RPAS


  • The big 7inch screen can display the back view clearly to you to help you park the car
  • The buttons on the right side are convenient and easy for you to use

7Inch LCD Car Rear View Monitor with COMS Camera RPAS


7Inch LCD Car Rear View Monitor with COMS Camera RPAS


  • The bracket is made of good material and durable to use a long time for car owners

7Inch LCD Car Rear View Monitor with COMS Camera RPAS


7Inch LCD Car Rear View Monitor with COMS Camera RPAS


7Inch LCD Car Rear View Monitor with COMS Camera RPAS


7Inch LCD Car Rear View Monitor with COMS Camera RPAS


  • Part of accessories, AC adapter, car convert cable, connecting cabl eare showed here

7Inch LCD Car Rear View Monitor with COMS Camera RPAS


  • Remote control is provided for you to operate this system easily

How to Install a Rear-View Camera in Your Car:

7Inch LCD Car Rear View Monitor with COMS Camera RPAS


  • Disconnect the battery cables from the battery. Check the vehicle's repair manual to find out what size wrench to use. Leave the disconnected cables a safe distance from the battery posts
  • Decide where you want to install the rear-view camera. Most people put them in the plastic bumper so they don't have to drill into the car's sheet metal
  • Drill a hole for the camera. Check the installation instructions to see what size drill bit to use. Don't make the hole too large or the camera will fall out
  • Place the camera in the hole using the rubber grommet supplied with the camera. Make sure the camera and grommet are tight 
  • Attach the camera's power wire to the backup-light power wire on your car. You'll have to splice the wires together. Use wire cutters to cut the wires, leaving enough excess wire to reconnect. Strip the ends of the wire to expose the bare wire using wire strippers. Splice the wires together using a two-into-one connector. This will give the rear-view camera power when you put the car in reverse
  • Route the camera's output wire to the rear-view monitor and connect the wire to the monitor's input. For installation of the monitor, see the monitor's installation instructions
  • Reconnect the battery, start the car and put the car in reverse. The rear-view monitor should turn on and give you a view of what's behind you

How to Connect a Rear View Camera:

7Inch LCD Car Rear View Monitor with COMS Camera RPAS


  • Remove the plastic or carpet panel on the inside of the trunk behind the license plate and below the trunk lid. If your vehicle is an SUV (sport utility vehicle) or something similar, expose the innards inside the tailgate
  • Mount the camera. Remove the two license plate bolts and insert them through the camera bolt holes and back onto the car. Use the license plate light hole to push the wiring through to the trunk
  • Run the red and white cable from the camera you have mounted on the license plate frame to a reversing light housing inside the vehicle. The license plate light can provide a convenient hole, or simply drill a new hole and weatherize it with a grommet
  • Trim and strip 1/4 inch of plastic sheathing off the end of the wire at the reversing light housing
  • Identify the vehicle wires that provide power to the reversing lights. Identify them by tracing the wiring back from the reversing light bulb connector. Strip 1/4- inch of plastic sheathing off the wire. This should be at a convenient, easy to reach location--the middle is fine. Wrap the camera wires around the reversing light wires, match red to red and black to black. Seal with electrical tape
  • Attach the display monitor to a convenient position on the dashboard. Use the included hook and loop tape. Plug the power supply from the display monitor into the cigarette lighter plug on the vehicle's dashboard
  • Test and then replace the plastic or carpet panel

 Package Included:


  • 1 x Car Rear View Monitor
  • 1 x Camera
  • 1 x AC Adapter
  • 1 x Car Convert Cable
  • 2 x AV Cable
  • 2 x Connecting Cable
  • 1 x Bracket
  • 1 x Remote Controller