Home >> Car & Motorcycle Accessories >> Car Parts >> 7Inch LCD Car Rearview Mirror Monitor with 1/3 COMS Camera RPAS

7Inch LCD Car Rearview Mirror Monitor with 1/3 COMS Camera RPAS

SKU:A1399000CH

Are you tired of looking back frequently when you back a car or park it in a narrow place? This car rear view LCD monitor is for you! This is a brand new 7'' car rearview monitor with 1/3 COMS camera RPAS. The LCD monitor can be positioned anywh...
Retail Price:
USD$ 182.78
Wholesale Price:
 
Wholesale Price
Quantity 2-45-910-29≥30
Price USD$ 103.67USD$ 87.30USD$ 70.93USD$ 49.10
 
Qty:
pieces
If you want to buy only 1 piece, please alter the quantity in ‘My Cart’.
Note: you could enjoy the wholesale price of this item as long as the item quantity of your order is more than 1.
  • For online wholesaler or distributor, you can buy directly online. If you want to buy more than offered quantities for better price, please click wholesale inquiry.

  • Top Selling
 
  • Overview

Specifications:

Camera:


  • Image Sencer: 1/3 Color CMOS
  • TV System: PALNTSC
  • Resolution:  420TVL
  • Total Pixels: PAL: 628 x 586 NTSC: 510 x 496
  • Mini Lumination: 0.1LUS(1RON)
  • Video Output: 1.0Vpp at 75ohm
  • Power Supply: DC12V ≤ 130mA(IRON)
  • Operation Temperature: -20°C~+70°C

Monitor:


  • Resolution: 480 x 234
  • OSD Language: Chinese, English
  • Screen Size: 7in Widescreen
  • Compatible: PAL and NTSC
  • Response Time (ms): R: 30 / F:50
  • Viewing Angle: U: 40/D: 55, L/R: 55
  • Power Supply: DC12V
  • Power: 8W
  • Lamp Life Time: >10,000 hours
  • Operation Temperature: +5°C~+20°C

Features:


  • Screen Size 7-inch Widescreen, 16:9 ratio
  • Dot pitch (mm) 0.107 x 0.370
  • PAL and NTSC compatible
  • Brightness, color, contrast controls
  • Dual video input (v1/ v2)
  • Power consumption about 8W
  • Rear view system is designed with car rear view camera and monitor security system
  • The big screen can give you a clear back view and make you convenient to park your car
  • This rear view system will help you to have a back view to park your car
  • This advanced rear view system is made of good material and durable to use a long time for car owners
  • Each detail is paid attention to ensure every process without any defect
  • This car rear view camera will be your best friend while driving
  • This rear view system is a good gift to new drivers

Details:

7Inch LCD Car Rearview Mirror Monitor with 1/3 COMS Camera RPAS


  • This car LCD screen that is mounted on your dashboard displaying the camera's video feed

7Inch LCD Car Rearview Mirror Monitor with 1/3 COMS Camera RPAS 


  • It provides all the cables which you need, which is easy to use

7Inch LCD Car Rearview Mirror Monitor with 1/3 COMS Camera RPAS


  • This 7" car LCD monitor which will help you to have a back view to park your car

7Inch LCD Car Rearview Mirror Monitor with 1/3 COMS Camera RPAS


  • This car rear view is made of good material and durable to use a long time for car owners

7Inch LCD Car Rearview Mirror Monitor with 1/3 COMS Camera RPAS 


  • With this remote control, you can operate this system easily and effortless

7Inch LCD Car Rearview Mirror Monitor with 1/3 COMS Camera RPAS


  • With a sturdy holder design, it is steady and easy to install

7Inch LCD Car Rearview Mirror Monitor with 1/3 COMS Camera RPAS


  • Equipped with anything you need, you can install the rear view system quickly as soon as you get them

Precautions:


  • Recommend using a regulated DC12V power supply unit with camera for the best picture and for safe operation of the unit
  • Do not cut the power input jack and connect the conductor to power supply directly, because that will fatally injured the camera. If you have to connect the conductor, please use our cable in accessories
  • Do not attempt to disassemble the camera. There are no user serviceable part s inside. Refer servicing to qualified service person

How to Install a Camera in Your Car:


  • Disconnect the battery cables from the battery. Check the vehicle's repair manual to find out what size wrench to use. Leave the disconnected cables a safe distance from the battery posts
  • Decide where you want to install the rear-view camera. Most people put them in the plastic bumper so they don't have to drill into the car's sheet metal
  • Drill a hole for the camera. Check the installation instructions to see what size drill bit to use. Don't make the hole too large or the camera will fall out
  • Place the camera in the hole using the rubber grommet supplied with the camera. Make sure the camera and grommet are tight
  • Attach the camera's power wire to the backup-light power wire on your car. You'll have to splice the wires together. Use wire cutters to cut the wires, leaving enough excess wire to reconnect. Strip the ends of the wire to expose the bare wire using wire strippers. Splice the wires together using a two-into-one connector. This will give the rear-view camera power when you put the car in reverse
  • Route the camera's output wire to the rear-view monitor and connect the wire to the monitor's input. For installation of the monitor, see the monitor's installation instructions
  • Reconnect the battery, start the car and put the car in reverse. The rear-view monitor should turn on and give you a view of what's behind you

How to Install a Rear-View Camera in Your Car:

7Inch LCD Car Rearview Mirror Monitor with 1/3 COMS Camera RPAS


Rear-view cameras are especially useful in tight parking lots, dark areas or in places where children might be running around. You can install as many of these cameras as you want, though one or two is usually enough


Instructions:


  • Disconnect the battery cables from the battery. Check the vehicle's repair manual to find out what size wrench to use. Leave the disconnected cables a safe distance from the battery posts
  • Decide where you want to install the rear-view camera. Most people put them in the plastic bumper so they don't have to drill into the car's sheet metal
  • Drill a hole for the camera. Check the installation instructions to see what size drill bit to use. Don't make the hole too large or the camera will fall out
  • Place the camera in the hole using the rubber grommet supplied with the camera. Make sure the camera and grommet are tight
  • Attach the camera's power wire to the backup-light power wire on your car. You'll have to splice the wires together. Use wire cutters to cut the wires, leaving enough excess wire to reconnect. Strip the ends of the wire to expose the bare wire using wire strippers. Splice the wires together using a two-into-one connector. This will give the rear-view camera power when you put the car in reverse
  • Route the camera's output wire to the rear-view monitor and connect the wire to the monitor's input. For installation of the monitor, see the monitor's installation instructions
  • Reconnect the battery, start the car and put the car in reverse. The rear-view monitor should turn on and give you a view of what's behind you

Tips & Warnings


  • Don't rely solely on the rear-view camera when backing up. Use it as a supplementary aid
  • You must have the rear-view monitor set up and installed correctly to receive the video signal from the rear-view camera
  • Don't install the camera (or any electrical device) with the battery connected, or you'll risk a severe electric shock

How to Connect a Rear View Camera:

7Inch LCD Car Rearview Mirror Monitor with 1/3 COMS Camera RPAS


  • Remove the plastic or carpet panel on the inside of the trunk behind the license plate and below the trunk lid. If your vehicle is an SUV (sport utility vehicle) or something similar, expose the innards inside the tailgate
  • Mount the camera. Remove the two license plate bolts and insert them through the camera bolt holes and back onto the car. Use the license plate light hole to push the wiring through to the trunk
  • Run the red and white cable from the camera you have mounted on the license plate frame to a reversing light housing inside the vehicle. The license plate light can provide a convenient hole, or simply drill a new hole and weatherize it with a grommet
  • Trim and strip 1/4 inch of plastic sheathing off the end of the wire at the reversing light housing
  • Identify the vehicle wires that provide power to the reversing lights. Identify them by tracing the wiring back from the reversing light bulb connector. Strip 1/4- inch of plastic sheathing off the wire. This should be at a convenient, easy to reach location--the middle is fine. Wrap the camera wires around the reversing light wires, match red to red and black to black. Seal with electrical tape
  • Attach the display monitor to a convenient position on the dashboard. Use the included hook and loop tape. Plug the power supply from the display monitor into the cigarette lighter plug on the vehicle's dashboard
  • Test and then replace the plastic or carpet panel

Package Included:


  • 1 x Car Rear View Monitor
  • 1 x AV Cable
  • 1 x RCA Cable 
  • 1 x Camera
  • 1 x Earphone
  • 1 x Remote Controll
  • 1 x Base