Home >> Car & Motorcycle Accessories >> Car Parts >> 7Inch TFT LCD Car Rear View Monitor & 1/4in Color CMOS 420TVL Camera System 778S

7Inch TFT LCD Car Rear View Monitor & 1/4in Color CMOS 420TVL Camera System 778S

SKU:A1399000FV

Retail Price:
USD$ 231.98
Wholesale Price:
 
Wholesale Price
Quantity 2-45-910-29≥30
Price USD$ 136.72USD$ 117.21USD$ 97.71USD$ 71.71
 
  • Top Selling
 
  • Overview

Specifications:

Camera :


  • Image Device: 1/4 inch color CMOS OV7950
  • TV System: NTSC
  • Effective Pixels: 628 x 582 pixels
  • Sensing Area: 5.8 x 4.2mm/4.7 x 3.5mm
  • Sync. System: Internal
  • Resolution: 420TV lines
  • Minimum Illumination: 0.5Lus/F1.2
  • Lens: 2.1mm
  • Lens Angle: 170deg
  • S/N Ratio: More than 48db
  • Electronic Shutter: 1/60-1/15,000 seconds
  • Video Output: RCA connector, 1.0vp-p, 75ohm
  • Current Consumption: 90mA
  • Power Supplu: 12v DC
  • Operating Temperature: -10 to 50degrees ccentigrade, RH95%
  • Storage Temperature: -30 to 60degrees centigrade, RH95%
  • Other Items: Automatic white balance, AGC and BLC
  • Size: 1.6 x 3.5mm/0.6 x 1.4in(W x L)

Monitor:


  • Display Components: TFT-LCD
  • Color System: Multi-system PAL / NTSC / SECAM (optional)
  • Audio Output: 350mW (maximum)
  • Connection Terminal: External antenna input jack, A/V input jack, earphone jack, power input jack
  • Power Consumption: About 10W
  • Pixel: 480 x 234

Features:


  • This 7in TFT  car LCD monitor & 1/4in color CMOS 420TVL camera system has the combination of TV/AV
  • Multi-system integrating PAL B/G, NTSC and SECAM D/K with FLIP function
  • Full-scaled enhanced signal reception
  • Non-radiation, non-flash
  • Environmentally friendly design
  • This is a convenient 7Inch desk type rear view camera system with a car reverse camera
  • This car LCD monitor will help you to have a back view to park your car
  • This parking aid helps to prevent dangerous and costly collisions
  • Back vision picture can turn to up/down/left/right
  • All functions of the car LCD monitor can operate by remote control
  • Installation is simple and can be directly stuck in your car

Details:


7Inch TFT LCD Car Rear View Monitor & 1/4in Color CMOS 420TVL Camera System 778S


  • The item which comes with clear image and high resolution ratio ensures your safety

7Inch TFT LCD Car Rear View Monitor & 1/4in Color CMOS 420TVL Camera System 778S


7Inch TFT LCD Car Rear View Monitor & 1/4in Color CMOS 420TVL Camera System 778S


  • This car LCD screen that is mounted on your dashboard displaying the camera's video feed

7Inch TFT LCD Car Rear View Monitor & 1/4in Color CMOS 420TVL Camera System 778S


  • This car rear view is made of good material and durable to use a long time for car owners

7Inch TFT LCD Car Rear View Monitor & 1/4in Color CMOS 420TVL Camera System 778S


  • With a sturdy base design, it is steady and easy to install

7Inch TFT LCD Car Rear View Monitor & 1/4in Color CMOS 420TVL Camera System 778S


7Inch TFT LCD Car Rear View Monitor & 1/4in Color CMOS 420TVL Camera System 778S


  • It provides all the cables which you need, which is easy to use

7Inch TFT LCD Car Rear View Monitor & 1/4in Color CMOS 420TVL Camera System 778S 


  • Well packed 7" TFT LCD car rear view monitor with 1/4" color CMOS 420TVL camera

How to Install a Camera in Your Car:


  • Disconnect the battery cables from the battery. Check the vehicle's repair manual to find out what size wrench to use. Leave the disconnected cables a safe distance from the battery posts
  • Decide where you want to install the rear-view camera. Most people put them in the plastic bumper so they don't have to drill into the car's sheet metal
  • Drill a hole for the camera. Check the installation instructions to see what size drill bit to use. Don't make the hole too large or the camera will fall out
  • Place the camera in the hole using the rubber grommet supplied with the camera. Make sure the camera and grommet are tight
  • Attach the camera's power wire to the backup-light power wire on your car. You'll have to splice the wires together. Use wire cutters to cut the wires, leaving enough excess wire to reconnect. Strip the ends of the wire to expose the bare wire using wire strippers. Splice the wires together using a two-into-one connector. This will give the rear-view camera power when you put the car in reverse
  • Route the camera's output wire to the rear-view monitor and connect the wire to the monitor's input. For installation of the monitor, see the monitor's installation instructions
  • Reconnect the battery, start the car and put the car in reverse. The rear-view monitor should turn on and give you a view of what's behind you

Operation:


  • Connect the yellow video jack vith monitor video input jack
  • Conenct the red (or black) power input jack with power supply

Precaution:


  • Recommend using regulated DC12V power supply unit with camera for best picture and for safe operation of the unit
  • Do not cut power input jack and connect the conductor to power supply directly, bacause that will fatally injured the camera
  • Do not attempt to disassemble the camera. There are no user serviveable parts inside. Refer servivcing to qualified service person

How Does a Car Backup LCD Monitor Work?


7Inch TFT LCD Car Rear View Monitor & 1/4in Color CMOS 420TVL Camera System 778S

What is a Sensor?


  • Sensors measure a physical quantity, such as distance, and convert it to an electrical signal for a receiver to interpret. In a reverse sensor, the physical quantity is the distance between the rear fender and the obstacle. This is converted to an electronic signal and sent to a receiver, which will give a warning sound or light. Other cars will actually give the physical distance. Some cars have a camera and a screen on the dashboard for viewing

How Does It Work?


  • Car sensors emit radio waves. The sensor measures the time it takes for the radio wave to hit the object and return. As the sensor moves closer to the object the time is decreased. The sensor converts this to an electrical signal and sends it to the receiver, which converts it to a readout or alarm

How Do Parking LCD Monitor Work?


7Inch TFT LCD Car Rear View Monitor & 1/4in Color CMOS 420TVL Camera System 778S


Parking LCD Monitor:


  • A parking LCD monitor is a safety device that can help people recognize various roadway dangers. People often attached them behind their rear vehicle tail lights. They generally work by sending out or receiving radio waves, much like a radio or radar gun. A mini-computer inside a sensor box registers electromagnetic waves that bounce off the surface of that given object. Some parking sensors can determine how far away an obect is by looking at the length or frequency of the wave emitted by the object. Certain waves along the electromagnetic spectrum have certain lengths and sizes. A parking sensor can measure those wave types and tell how large, small or fast an object is moving. Large objects essentially emit different sizes of energy wavelengths. Large objects that move very fast reflect a totally different carrier wave signature. The same is true of smaller objects, as well

Ultrasonic and Wireless Parking Sensors:


  • Older model parking sensors often had difficulty in adverse weather conditions. It is because of this difficulty that many parking sensors today use ultrasonic and wireless technology. Ultrasonic waves are generally very high in frequency and short in length. What this means is that they are very strong and can diffuse through various substances, more so than waves used in traditional types of parking sensors. A transducer is responsible for emiting an ultrasonic beam from a sensor box. Because ultasonic waves cannot be heard by the human ear, sensor boxes usually are equipped with an alert device inside the box itself. They can also be linked to either a TV monitor or camera-type device. Conversely, some consumers claim that ultrasonic technology is too cumbersome. To install a parking sensor, you need to have several different sensors placed either behind a tail light or car bumper. Consumers often report that eletromagnetic parking sensors require less work to install and less maintenance

Package Included:


  • 1 x Monitor
  • 1 x Camera
  • 1 x Charger
  • 1 x Car Cable
  • 1 x Remote Control
  • 1 x Base
  • 1 x Video Cable
  • 1 x AV Cable
  • 1 x Connect Cable