Home >> Car & Motorcycle Accessories >> Car Parts >> CarJoy 7" TFT LCD MP5 Car Rear View Monitor & 1/3" Color CMOS 420TVL Camera

CarJoy 7" TFT LCD MP5 Car Rear View Monitor & 1/3" Color CMOS 420TVL Camera


Do you want to do this! This 7in TFT LCD Rear View Mirror monitor is large but lightweight enough that you can carry this Car Rearview Mirror Monitor everywhere for instant video display: TV and video playback of any kind, CC...
Retail Price:
USD$ 197.38
Wholesale Price:
Wholesale Price
Quantity 2-45-910-29≥30
Price USD$ 112.10USD$ 94.39USD$ 76.69USD$ 53.08
If you want to buy only 1 piece, please alter the quantity in ‘My Cart’.
Note: you could enjoy the wholesale price of this item as long as the item quantity of your order is more than 1.
  • For online wholesaler or distributor, you can buy directly online. If you want to buy more than offered quantities for better price, please click wholesale inquiry.

  • Top Selling
  • Overview



CarJoy 7

CarJoy 7

  • This design of Car Rearview Monitor is stylish and delicate 

 CarJoy 7

  • Suitable for most of vehicles to avoid possible interference

CarJoy 7

  • Beautiful appearance you will like it

CarJoy 7

  • Automatically shift back-view system when reversing the car

CarJoy 7

CarJoy 7

  • Accessories are all useful

CarJoy 7

  • Easy installation and simple to use


  • Connect the power cable of the  monitor and the one for the camera with the power cable in the vehicle. When the camera is intended only for reversing
  • Connect the power cable of the camera (and the power cable of the monitor) with that of the reversing gear. The red(or black/white)wire is positive, the black is negative


  • Just use the accessory AC adaptor and auto-mobile adaptor (12V)
  • For your safe, please plug off the AC adaptor or automobile adaptor when you don't use the TV
  • Please don't turn the volume too high in order to keep convenience and safe
  • Please turn down the volume when using the open-typed headphone
  • Please stop to use headphone or turn down when appear Tinnitus
  • The ear experts suggest you'd better avoid to use headphone continues too long

How to Install a Rearview Mirror Monitor in Your Car:

  • Disconnect the battery cables from the battery before beginning installation. Use a wrench or socket to remove the battery cables. Check the vehicle's repair guide for the proper wrench or socket size.
  • Remove the original rearview mirror from your car. Leave its mounting bracket on the windshield-you'll attach the rearview mirror monitor to this. Check the rearview mirror's mounting screw to see what size screwdriver you'll need
  • Insert the rearview mirror monitor into the existing mounting bracket on your windshield. Use the bolt supplied with the monitor to secure the device in the mounting bracket
  • Route an A/V power cable from the A/V selector box to the monitor. Connect the A/V cable from the monitor to the A/V power cable. Use cable ties to secure the cables and prevent them from hanging
  • Reconnect the battery. Start your vehicle and select the rearview mirror monitor on the A/V selector box. The video monitor should come on if the rearview mirror monitor is correctly installed

How to Install a Camera in Your Car:

  • Disconnect the battery cables from the battery. Check the vehicle's repair manual to find out what size wrench to use. Leave the disconnected cables a safe distance from the battery posts
  • Decide where you want to install the rear-view camera. Most people put them in the plastic bumper so they don't have to drill into the car's sheet metal
  • Drill a hole for the camera. Check the installation instructions to see what size drill bit to use. Don't make the hole too large or the camera will fall out
  • Place the camera in the hole using the rubber grommet supplied with the camera. Make sure the camera and grommet are tight
  • Attach the camera's power wire to the backup-light power wire on your car. You'll have to splice the wires together. Use wire cutters to cut the wires, leaving enough excess wire to reconnect. Strip the ends of the wire to expose the bare wire using wire strippers. Splice the wires together using a two-into-one connector. This will give the rear-view camera power when you put the car in reverse
  • Route the camera's output wire to the rear-view monitor and connect the wire to the monitor's input. For installation of the monitor, see the monitor's installation instructions
  • Reconnect the battery, start the car and put the car in reverse. The rear-view monitor should turn on and give you a view of what's behind you

Pavkage Included:

  • 1 x Monitor
  • 1 x Camera
  • 2 x Connect Cables
  • 1 x Video Conncet Cable
  • 1 x Remote Controller