Home >> Car & Motorcycle Accessories >> Car Parts >> 9.2" TFT LCD Car Rear View Monitor & 1/3" Color CMOS 420TVL AC-15 Camera

9.2" TFT LCD Car Rear View Monitor & 1/3" Color CMOS 420TVL AC-15 Camera


Do you want to do this! What's This? Add video to your vehicle with a Car Rear View Monitor and Rear-view camera.Car Rear View Monitor and Camera is an accessory that takes your vehicle to the next level. A very good rearview mirror has ultra br...
Retail Price:
USD$ 92.21
Wholesale Price:
Wholesale Price
Quantity 2-45-910-29≥30
Price USD$ 88.55USD$ 87.45USD$ 86.35USD$ 84.89
If you want to buy only 1 piece, please alter the quantity in ‘My Cart’.
Note: you could enjoy the wholesale price of this item as long as the item quantity of your order is more than 1.
  • For online wholesaler or distributor, you can buy directly online. If you want to buy more than offered quantities for better price, please click wholesale inquiry.

  • Top Selling
  • Overview



  • Super slim Rear View Monitor
  • Brightness / Contrast / Saturation / Color adjustable Auto Rear View Monitor
  • The Car Rear View Monitor has manual button touch function
  • Purpose monitor and vehicle entertainment
  • Slot device simplifies installation and detachment
  • Screen Size: 9.2" Color TFT LCD
  • Screen Format: 16:9
  • Definition: 480 x 234 RGB
  • System: PAL /NTSC auto switchable
  • RCA Video Input: AV1/AV2
  • Power Supply: DC 12V
  • Power Consumption: 7W
  • Dimensions: 250 x 108 x 25mm / 9.8 x 4.3 x 1.0in
  • Installation Method: Mount on the back-view mirror


  • Image Sensor: OV 7949 1/3 Color CMOS
  • TV System: PAL/NTSC
  • Total Pixels: PAL: 628 x 586, NTSC: 510 x 496
  • Resolution: 420TVL
  • Mini Lumination: 0.1 LUX (IR ON)
  • Video Output: 1.0V pp at 75 ohm
  • Power Supply: DC 12V ≤130mA (IR ON)
  • Operating Temperature: -20℃~70℃




  • Elegant rear view mirror has ultra broad-angle digital TFT-LCD TV, digital photo frame, easy installation and simple to use




  • 1/3 Color CMOS image sensor, add video to your vehicle with a rearview mirror monitor and rear-view camera


  • Connect the power cable of the LCD Car Monitor and the one for the camera with the power cable in the vehicle


  • Recommend using a regulated DC12V power supply unit with camera for the best picture and for safe operation of the unit
  • Do not cut the power input jack and connect the conductor to power supply directly, because that will fatally injured the camera. If you have to connect the conductor, please use our cable in accessories
  • Do not attempt to disassemble the camera. There are no user serviceable part s inside. Refer servicing to qualified service person

How to Install a Rearview Mirror Monitor in Your Car:

  • Disconnect the battery cables from the battery before beginning installation. Use a wrench or socket to remove the battery cables. Check the vehicle's repair guide for the proper wrench or socket size.
  • Remove the original rearview mirror from your car. Leave its mounting bracket on the windshield-you'll attach the rearview mirror monitor to this. Check the rearview mirror's mounting screw to see what size screwdriver you'll need
  • Insert the rearview mirror monitor into the existing mounting bracket on your windshield. Use the bolt supplied with the monitor to secure the device in the mounting bracket
  • Route an A/V power cable from the A/V selector box to the monitor. Connect the A/V cable from the monitor to the A/V power cable. Use cable ties to secure the cables and prevent them from hanging
  • Reconnect the battery. Start your vehicle and select the rearview mirror monitor on the A/V selector box. The video monitor should come on if the rearview mirror monitor is correctly installed

How to Install a Camera in Your Car:

  • Disconnect the battery cables from the battery. Check the vehicle's repair manual to find out what size wrench to use. Leave the disconnected cables a safe distance from the battery posts
  • Decide where you want to install the rear-view camera. Most people put them in the plastic bumper so they don't have to drill into the car's sheet metal
  • Drill a hole for the camera. Check the installation instructions to see what size drill bit to use. Don't make the hole too large or the camera will fall out
  • Place the camera in the hole using the rubber grommet supplied with the camera. Make sure the camera and grommet are tight
  • Attach the camera's power wire to the backup-light power wire on your car. You'll have to splice the wires together. Use wire cutters to cut the wires, leaving enough excess wire to reconnect. Strip the ends of the wire to expose the bare wire using wire strippers. Splice the wires together using a two-into-one connector. This will give the rear-view camera power when you put the car in reverse
  • Route the camera's output wire to the rear-view monitor and connect the wire to the monitor's input. For installation of the monitor, see the monitor's installation instructions
  • Reconnect the battery, start the car and put the car in reverse. The rear-view monitor should turn on and give you a view of what's behind you

Package Included:

  • 1 x Monitor
  • 1 x Camera
  • 1 x Charger
  • 1 x Remote Control
  • 1 x Base Support
  • 1 x Connecting Cable