Home >> Security & Surveillance >> Surveillance Accessories >> OVP Aluminium Alloy CCD CCTV Camera Mounting Bracket JZ-1021Y

OVP Aluminium Alloy CCD CCTV Camera Mounting Bracket JZ-1021Y


The bracket is a tool that allows photographers to attach their cameras to a tripod in portrait orientation (vertical frame) rather than the standard landscape orientation (horizontal frame). While most cameras come equipped with a mounting socket at...
Retail Price:
USD$ 12.78
Wholesale Price:
Wholesale Price
Quantity 2-78-1920-49≥50
Price USD$ 3.26USD$ 3.10USD$ 2.95USD$ 2.74
If you want to buy only 1 piece, please alter the quantity in ‘My Cart’.
Note: you could enjoy the wholesale price of this item as long as the item quantity of your order is more than 1.
  • For online wholesaler or distributor, you can buy directly online. If you want to buy more than offered quantities for better price, please click wholesale inquiry.

  • Top Selling
  • Overview


  • Aluminium alloy camera mount bracket is ideal for CCD CCTV camera
  • Horizontal Angle of the CCTV Camera Bracket: 360°
  • Tilt Angle: 90°
  • Material: Aluminium Alloy
  • Type: Indoor, outdoor, wall and ceiling
  • Dimensions: 80 x 55 x 55mm / 3.15 x 2.17 x 2.17 in(L x W x H)


OVP Aluminium Alloy CCD CCTV Camera Mounting Bracket JZ-1021Y

  • Easy to install, sturdy design

Instructions for Mounting a Sturdy Bracket:

  • A shelf held up by brackets.rack and shelf image by Lars Christensen from Fotolia.comMounting a bracket to a wall requires you to attach the bracket with screws into a secure wall stud. Just screwing a bracket into a stud is not enough to make it sturdy. It also must be level, with screws far enough into the studs that it will hold firmly


  • Run a stud sensor over the wall where the brackets need installation. Choose the proper height for the bracket and make a mark on the wall with a pencil to indicate the location of the stud and the bracket's height
  • Position the bracket on the wall so it is over the marked stud. Hold the bracket in place with one hand and use a level to get it straight. Without allowing it to shift on the wall, make pencil marks through the bracket's mounting holes to note their locations on the wall
  • Drill pilot holes into the wall and the stud at the locations of the pencil marks. Use a drill bit smaller than the screw to ensure that it bites into the wood securely. Use at least 2-inch long screws to ensure that the bracket will be securely attached to the stud
  • Break two flat wooden toothpicks in half and slip them into the holes. The toothpicks make the bond between screw and hole tighter and add to the overall strength of the bracket
  • Place the bracket over the holes and insert screws into each hole. Tighten each screw two-thirds of the way into the wall using a hand held screwdriver. Hold a level against the bracket and tighten the top screw securely. Tighten the bottom screw completely, but make sure that the bracket remains level

Package Included:

  • 1 x Camera Mounting Bracket