- Supports Microsoft Intellimouse, Logitech Net Mouse, etc.
- Supports DOS, Win3.X, Win95/98/98SE/2000/ME/XP, WinNT, Netware, Unix, Linux
- Hot plug-add or remove connected PCs for maintenance without powering down the KVM switch or PCs
- 4 port KVM switch USB plus Audio
- Superior video quality-up to 1920 x 1440
- No software required-PC selection via push buttons, or hot keys
- Keyboard status restored when switching PCs
- LED display for monitoring status
- Buzzer sound for switching port confirmation
- PC Port: 4
- Console Port: 1
- MAXPC Connections: 4
- LED: 4
- Housing: Metal
- PC Selection: Hot key/button
- On Screen Display Control: No
- Scan Intervals: 8 sec.
- Keyboard Emulation: USB
- Mouse Emulation: USB
- VGA Resolution: 1920 x 1440
- Bandwidth: 200MHz
- PC Port Connector: 4 USB type B port Female, 4 VGA HDDB 15 pin Female, 4 3.5mm jack speaker, 4 3.5mm jack microphone
- Console Port Connector: PS/2 keyboard mini-din 6pin female, 2 USB A port female VGA HDDB 15 pin female, one 3.5mm jack speaker, one 3.5mm jack microphone
- Dimensions: 201.3 x 75.5 x 47.4mm / 7.9 x 3.0 x 1.9in (L x H x W)
- Color: Blue
- 4 port KVM switch is compact size design, easy portable
- Switch your monitor easily from one computer to the next by using keyboard hot keys or software
- Auto scan function for monitoring PC operation
How to Install a KVM Switch:
- Get your entire computers ready by turning them off and disconnecting any keyboards, monitors or mice. You will also need to get all of the computers you plan to use relatively close together. If it will be three or more, you may want to get a rack.
- Setup the KVM switch in a central location so that is about an equal distance from all the computers. Plug in the KVM into a local power supply.
- Connect all the computers. Connect the cable from each keyboard, video and mouse port on the computers to the KVM switch.
- Restart and test each computer by choosing the computers from the switch one at a time.
- 1 x 4 Port KVM Switch
- 1 x Manual