Home >> Car & Motorcycle Accessories >> Car Parts >> Rgyrid Car Interior Decorative Neon Blue Light AD-201 2 Pcs

Rgyrid Car Interior Decorative Neon Blue Light AD-201 2 Pcs

SKU:A0679000EX

What a value! You are viewing a Car LED Fancy Lamp AD-202.Designed to compatible with 12V cars, the Car Decorative Lamp can produce bright blue light and it is also ideal for decorating your car. Why not obtain this lamp bulb to brighten your ca...
Retail Price:
USD$ 24.78
Wholesale Price:
 
Wholesale Price
Quantity 2-78-1920-49≥50
Price USD$ 12.26USD$ 10.31USD$ 8.36USD$ 5.75
 
Qty:
pieces
If you want to buy only 1 piece, please alter the quantity in ‘My Cart’.
Note: you could enjoy the wholesale price of this item as long as the item quantity of your order is more than 1.
  • For online wholesaler or distributor, you can buy directly online. If you want to buy more than offered quantities for better price, please click wholesale inquiry.

  • Top Selling
 
  • Overview

Specifications:


  • The Car Decorative Lamp is made of durable tube, soft, flexible and hard to break
  • Transparent outer tooth ripple design makes the Car LED Fancy Lamp brighter and more beautiful than other EL light
  • Movable foot base with double-face tape, fitting many places
  • The Car LED Fancy Lamp allows you to accentuate and illuminate your cars interior with two soft blue LED lights
  • Simply mount each piece of the Tube EL Dash Light on either side of the dash area or on any clean and smooth surface
  • Once attached, adjust the hinged arms to your desired locations and plug in 12V adapter
  • Waterproof; ON/ OFF switch

Details:

Rgyrid Car Interior Decorative Neon Blue Light AD-201 2 Pcs


  • Transparent outer tooth ripple design makes the Car Light brighter and more beautiful than other EL light

Rgyrid Car Interior Decorative Neon Blue Light AD-201 2 Pcs


  • Movable foot base with double-face tape, fitting many places

Rgyrid Car Interior Decorative Neon Blue Light AD-201 2 Pcs


  • The light allows you to accentuate and illuminate your cars interior with two soft blue LED lights

Rgyrid Car Interior Decorative Neon Blue Light AD-201 2 Pcs


  • The Car LED Fancy Lamp allows you to accentuate and illuminate your cars interior with two soft blue LED lights

How to Install Neon Lights Under a Car?


Neon lights have always attracted attention. Now there are options to place neon lighting on a car's undercarriage. Unlike the iconic signs that used to be in front of buildings, the neon lighting under a car looks more like old-style fluorescent tube lights, but it comes in different colors. While the fragile glass tubes of the old building signs have been replaced with high-impact optical acrylic tubing, the neon glow is sure to be an eye-catching enhancement to any vehicle's appearance. Many kits are designed for the do-it-yourself and hobby markets. Quick installation and consumer-friendly pricing make them an easy upgrade for any enthusiast with an eye for style.


Preparation


  • Disconnect the car battery, beginning with the vehicle's negative battery cable.
  • Raise the front of the car on a jack (or the entire car on a lift) according to instructions in the owner's manual
  • Test the fit for the neon light tube mounting locations. Stay in accordance diagrams and instructions with the lighting kit. It is generally better to try to center the tubes front to rear along the underside of the vehicle.

Mount Transformer


  • Locate a spot in the engine compartment to mount the transformer. The preferred location is near the battery.
  • Mark hole locations with the marking pen, use the center-punch to "start" the holes, and drill mounting holes for attaching the transformer.
  • Mount the transformer according to the instructions in the kit.

Connecting Power Wires


  • Strip back the ends of each of the wires about 1/4-inch.
  • Slide a 1.5-inch length of "shrink-wrap tubing" over the end of one of the wires.
  • Solder the exposed portions of the connecting wires together using a soldering gun.
  • Place a drop of silicon sealer on the soldered connection.
  • Slide the section of shrink-wrap tubing over the new connection, and then use a heat-gun/blow drier to shrink the tubing to create a water tight seal.

Install Power to Transformer


  • Attach transformer power wire to positive side of the car battery.
  • Connect the "in-line fuse" to the battery-side transformer power wire no more than 18 inches away from the battery. At this point, leave the power wire to the transformer disconnected from the wires to the battery.
  • Connect the negative/ground wire from the transformer to the metal chassis of the vehicle.

On-off Switch Installation


  • Measure the distance from the wire connecting the in-line fuse to the inside dash of the car at the on-off switch location. Using this distance cut two lengths of wire, placing the ends near the in-line fuse and snake the other two ends to the firewall on the driver's side.
  • Feed the wiring for the switch through an existing rubber grommet in the firewall, into the car's interior.
  • Attach one end of the "on-off switch wire" to the transformer power wire that leads directly to the in-line fuse and car battery following the wire connection procedures described previously.
  • Attach 10-gauge wire to the power wire leading directly to the in-line fuse and car battery by following the wire connection procedures described previously.
  • Mount the on-off switch in a convenient location on the dash.

Install Neon Tubes Under Car


  • Mark locations for mounting brackets on the underside of the vehicle.
  • Center-punch each of the marked hole locations.
  • Carefully drill the holes for the mounting brackets in the center-punched holes.
  • Position the bracket and apply a small amount of silicon sealer to the holes before screwing in the hardware. Using a cordless drill with the appropriate bit, tighten the screws just enough to hold the bracket in place.
  • Ensure that the wires coming from the neon tubes are as close to the front of the car as possible in accordance to manufacturer's instructions.

Final Steps


  • Complete any steps specific to your kit instructions.
  • Check each bracket for tightness.
  • Tighten each set of bracket screws until the bracket seats firmly, using a cordless drill or the regular screwdriver.
  • Lower car jack/lift.
  • Reattach battery cables, taking care to connect positive cable first and test.

Package Included:


  • 2 x Fancy Lamps
  • 1 x Wall Charger
  • 1 x Car Charger
  • 3 x Stickup Mats