Home >> Car & Motorcycle Accessories >> Car Parts >> 20 LEDs Cars and Trucks Strobe Red & Blue Light Lamp PS-724

20 LEDs Cars and Trucks Strobe Red & Blue Light Lamp PS-724

SKU:A0679000FT

Why not obtain this LED Strobe Light to brighten your cars? This Car Strobe Light is easy to install and fit for most import and domestic vehicles, especially for warning and other special purposes, such as ambulance, clean the way; Also for motorcyc...
Retail Price:
USD$ 79.98
Wholesale Price:
 
Wholesale Price
Quantity 2-56-1415-39≥40
Price USD$ 21.26USD$ 20.63USD$ 19.99USD$ 19.15
 
Qty:
pieces
If you want to buy only 1 piece, please alter the quantity in ‘My Cart’.
Note: you could enjoy the wholesale price of this item as long as the item quantity of your order is more than 1.
  • For online wholesaler or distributor, you can buy directly online. If you want to buy more than offered quantities for better price, please click wholesale inquiry.

  • Top Selling
 
  • Overview

Specifications:


  • Output Power: 6W
  • Voltage: 12V
  • Working Environment: -30°C-60°C
  • Size of Car Light: 9.1 x 6.9 x 2.6cm / 3.58 x 2.71 x 1.02in(L x W x H)
  • Cable Length: 1.5 Meters

Features:


  • This Car Strobe Lights can be installed anywhere or replace front or outside roof light in your car
  • With fresh style design and top performance, this bright auto flash light is a great accessory for your vehicle
  • Pair multi-function flash controller car light is suitable for DC 12V (One side of 20 LED in blue light, the other side of 20 LED in red light when power on)
  • Made of crystal plastic and metal, aesthetic and durability
  • Bright pair car lamp will make your car looks bright and beautiful, thus can give your car a sense of romance, warm and noble
  • Car lamp with multi-function flash controller for convenience to use, with multi-flash modes
  • The speed of the light can be controlled (with wheel to "slow" and "swift" )
  • ON /OFF button on the controller

Details:

20 LEDs Cars and Trucks Strobe Red & Blue Light Lamp PS-724

20 LEDs Cars and Trucks Strobe Red & Blue Light Lamp PS-724


  • With fresh style design and top performance, this bright Auto Red & Blue Flash Car Strobe Light is a great accessory for your vehicle.Strobe Lights for Cars with multi-function flash controller for convenience to use, with multi-flash modes

20 LEDs Cars and Trucks Strobe Red & Blue Light Lamp PS-724

20 LEDs Cars and Trucks Strobe Red & Blue Light Lamp PS-724


  • Bright Pair Red & Blue Car Strobe Light will make your car looks bright and beautiful, thus can give your car a sense of romance, warm and noble

20 LEDs Cars and Trucks Strobe Red & Blue Light Lamp PS-724

20 LEDs Cars and Trucks Strobe Red & Blue Light Lamp PS-724


  • Pair multi-function flash controller car light is suitable for DC 12V (One side of 20 LED in blue light, the other side of 20 LED in red light when power on).The Car Strobe Light is made of crystal plastic and metal, aesthetic and durability

Size in Detail:

20 LEDs Cars and Trucks Strobe Red & Blue Light Lamp PS-724


How to Install Strobe Lights in Headlights:


  • Strobe lights produce regular flashes of light and are most often used in law enforcement and emergency vehicles. Installing strobe lights in your headlights is not very difficult. It requires a few tools that you can purchase at your hardware store. However, this project requires a high level of understanding of car electronics. If you are inexperienced with wiring car electronic circuits, for safety reasons and the well-being of your car, it's probably better to leave have a professional do the installation
  • Disconnect your car battery
  • Mark the location where you would like to install your strobe lights. You must install strobe lights at or below the horizontal center line of your reflector. Furthermore, you must leave at least 1 inch of space between the strobe light and the lens, and you must not install the strobe light above the manufacturer-installed light
  • Remove the reflector assembly from your headlights. Use the socket wrench to remove the retaining bolts and then lift the reflector assembly from the mounting bracket
  • Use a hole saw to cut a 1-inch hole in the headlight housing
  • Attach the thermal disc that came with your strobe lights to the strobe light bulbs. Do this by aligning the disc holes with the lamp ears and snapping them into place
  • Insert the disc/strobe light assembly into the hole in your headlight housing. Use the hardware provided by the manufacturer to secure the strobe lights to your headlight housing
  • Connect the strobe light assembly to the 3-socket connector housing. Connect the 3-socket connector housing to a 3-conductor power cable, with red, black, and white wires corresponding to negative, positive and ground charge respectively. Insert the red wire into the first socket of the 3-socket connector, labeled "1," the black wire into the second socket, labeled "2," and the white wire into the third socket, labeled "3." You will also notice "shield wire" on each side of your 3-conductor power cable. The shield wire prevents electromagnetic interference (interference from radio or communication sources). Use wire cutters to cut the shield wire, so that it is flush with the cable jacket
  • Connect the 3-conductor power cable to the 3-pin power housing that runs to the car battery.Connect the red pin into the first connection of the 3-pin power housing, the black pin into the second connection, and the white pin into the third connection. If you are in an area where radio interference is a problem then you will need to ground to the chassis the shield wire located on the side of the power cable adjacent to the power housing. You can attach it to the chassis using electrical tape
  • Connect the power housing to the terminals of your car battery
  • Replace the reflector covering over your strobe lights. You are now ready to operate your strobe lights

Package Included: 


  • 2 x Cars and Trucks Strobe Light
  • 1 x Screws Set
  • 1 x Control Box