Home >> Security & Surveillance >> Access Control Systems >> Aock Door Access Control Power Supply DC 12V 5A TA208A

Aock Door Access Control Power Supply DC 12V 5A TA208A

SKU:A14520000J

Are you searching for 12v power supply to the access control security systems in your company? Do you want your security access control systems more powerful and functional? Do you want to buy an access control power supply at low price but with high...
Retail Price:
USD$ 27.98
Wholesale Price:
 
Wholesale Price
Quantity 2-56-1415-39≥40
Price USD$ 20.41USD$ 18.14USD$ 15.87USD$ 12.84
 
Qty:
pieces
If you want to buy only 1 piece, please alter the quantity in ‘My Cart’.
Note: you could enjoy the wholesale price of this item as long as the item quantity of your order is more than 1.
  • For online wholesaler or distributor, you can buy directly online. If you want to buy more than offered quantities for better price, please click wholesale inquiry.

  • Top Selling
 
  • Overview

Specifications:


  • This 12v power supply can reduce the load of access controller and save wiring, reducing the hidden trouble
  • This best power supply can control various types of electric locks
  • Based delay control circuit, lock time of this access control power supply can be 0-15 seconds
  • After the input is set up, the electric lock could be opened directly with this 12v power supply
  • This best power supply endows automatic protection function
  • This 12v power supply could avoid the unexpected situations to ensure safety
  • Input Voltage: AC 220V 50 Hz
  • Output Voltage: DC 12V 5A
  • Material: Metal Iron
  • Size: 223mm x 223mm x 86mm/8.78in x 8.78in x 3.39in(L x W x H)

Details:

Aock Door Access Control Power Supply DC 12V 5A TA208A


  • The 12v power supply is well designed, which is endowed with high performance

Aock Door Access Control Power Supply DC 12V 5A TA208A


  • Automatic protection function is available in this best power supply

Aock Door Access Control Power Supply DC 12V 5A TA208A


  • The access control power supply can be accessed by batteries after power outage

Aock Door Access Control Power Supply DC 12V 5A TA208A


  • The 12v power supply is well packaged and it is safe to use

Aock Door Access Control Power Supply DC 12V 5A TA208A


  • The best power supply is precisely designed with high technology

How to Test a Laptop Power Supply:

Aock Door Access Control Power Supply DC 12V 5A TA208A


  • Plug the A/C adapter directly into a wall outlet. Make sure the power cable is securely inserted into the power brick
  • Locate the A/C adapter's output voltage. Voltage ratings are usually located on the bottom of the power brick
  • On the Ohm Meter, plug the red wire into the slot marked with a + sign -this is positive. Plug the black wire into the slot marked with a - sign - this is negative. Make sure to plug the ends in without the plastic handles
  • Set the Ohm Meter to DCV (Direct Current Voltage) and make sure it is set to a number higher than the voltage listed on the power supply. Usually you will set the Ohm meter to the number 50.
  • Place the tip of the of the black conductor on the outside edge of the adapter
  • Place the tip of the red conductor inside the adapter
  • To verify if power is being supplied, look at the needle reading; it should land on the voltage marking near the voltage listed on the back of the power supply

How to Install Power Supply to the Motherboard:

Aock Door Access Control Power Supply DC 12V 5A TA208A


  • Consult the motherboard's manual to determine where all the connections are. Find out what connections are required for the installed hardware. Serial ATA hard drives, for example, require a different type of power connection than IDE drives
  • Remember that generally, the cables only fit in one direction. If you can't get something to plug in, just reverse it and try again
  • Connect the power supply to the motherboard. There is a wide, white connector with 24 pins coming from the power supply. If there is an extra ATX12V 4-pin connection on your motherboard, plug the 24-pin cable into that. If not, snap off the 4-pin cable. Connect the remaining 20-pin cable to the motherboard
  • Plug in the power connectors to the processor and the processor fan. The processor fan will connect to either the motherboard or directly to the power supply
  • Attach the cables from the front of the computer to the motherboard. There will be one for the reset switch, the power switch, and the LED's for power and hard drive. The motherboard will be labeled with the proper port to plug them into. If polarity is required, plug the white or black cables into the negative slot
  • Push the 4-pin molex connectors into the CD ROM drive and hard drives. ATA serial hard drives use thin, flat connectors instead of the molex connector. Plug in the connector for the floppy drive. It is similar to the other molex connectors, but smaller

Package Included:


  • 1 x Access Control Power Supply