Home >> Toys & Hobbies >> Radio Control >> RC Helicopters & Accessories >> Mystery MYSTERY 315mm Replica Carbon Fiber Main Blades for ESKY CP V2 Series RC Helicopter

Mystery MYSTERY 315mm Replica Carbon Fiber Main Blades for ESKY CP V2 Series RC Helicopter

SKU:A1560000BA

Do you love RC helicopter? Are you searching for high quality helicopter blade for your RC Helicopter? If so, you can't miss this RC Helicopter Blades set! This is a brand new MYSTERY 315mm Replica Carbon Fibre Main Blades set for ESKY CP V2 Series R...
Retail Price:
USD$ 20.78
Wholesale Price:
 
Wholesale Price
Quantity 2-78-1920-49≥50
Price USD$ 4.72USD$ 4.54USD$ 4.36USD$ 4.12
 
Qty:
pieces
If you want to buy only 1 piece, please alter the quantity in ‘My Cart’.
Note: you could enjoy the wholesale price of this item as long as the item quantity of your order is more than 1.
  • For online wholesaler or distributor, you can buy directly online. If you want to buy more than offered quantities for better price, please click wholesale inquiry.

  • Top Selling
 
  • Overview

Specifications:


  • New RC helicopter blade features precision center of gravity and efficient wing design, this RC helicopter blade ensures the lock of the tail when reversing in high speed, better resistance to the wind
  • Newest development from E-SKY with high quality carbon fiber RC Helicopter Blades
  • With high quality
  • These Carbon Fiber Blades will give good tracking for your ESKY CP V2 Series RC Helicopter
  • Size: 315mm/12.4in(Length)
  • Material: Carbon Fibre

Details:

Mystery MYSTERY 315mm Replica Carbon Fiber Main Blades for ESKY CP V2 Series RC Helicopter
Mystery MYSTERY 315mm Replica Carbon Fiber Main Blades for ESKY CP V2 Series RC Helicopter


  • These Carbon Fiber Blades will give good tracking for your ESKY CP V2 Series RC Helicopter

Mystery MYSTERY 315mm Replica Carbon Fiber Main Blades for ESKY CP V2 Series RC Helicopter
Mystery MYSTERY 315mm Replica Carbon Fiber Main Blades for ESKY CP V2 Series RC Helicopter


  • This RC Helicopter Blades set comes in black and made from 100% high quality Carbon Fibre

Mystery MYSTERY 315mm Replica Carbon Fiber Main Blades for ESKY CP V2 Series RC Helicopter


  • This RC helicopter blade is easy to attach on the RC Helicopter, replacement can be done with ease

Size in Detail:

Mystery MYSTERY 315mm Replica Carbon Fiber Main Blades for ESKY CP V2 Series RC Helicopter

How to Balance RC Helicopter Blades:

Many RC helicopter companies claim the helicopter blades they sell are matched and balanced. This claim may not always be true and flying a helicopter without balanced blades can damage the aircraft. Balancing the rotor blades before the first flight should be standard procedure even if the RC helicopter is RTF (Ready to fly) or ARTF (Almost Ready to Fly.). Blades that aren't perfectly balanced can cause unnecessary vibration, and problems with hovering or steering. Bolts can loosen or even break during flight, resulting in a crash. In extreme cases permanent damage can occur that render the helicopter inoperable.


  • Place the rotor blade on top of a dowel rod or other round surface to balance it. Balance the blades evenly from right to left to find the center of gravity. The center of gravity is the point at which the blade is evenly off the ground on both sides while perfectly balanced on the rod
  • Place a colored piece of tape on the line for center of gravity or CG. You can remove the center of gravity mark later by removing the tape or markings with nail polish remover. Repeat the step for the second rotor blade
  • Face the rotor blades in opposite directions and lay one on top the other. Match up the bolt holes and slide a bolt through. Check the center of gravity marks on each blade to see if they line up. If the marks line up, the balancing is complete. Proceed to Step 4 if the blades aren't balanced
  • Weigh the blades to determine how far off balance they are. Anything more than 2/10-gram off from each other will cause problems. If the blades are out of balance by more than 2/10-gram consider sending them back to the manufacturer
  • Place a bolt through the rotor blade holes to attach them as one unit. Place two 18-inch lengths of 2-by-4 lumber side by side. Balance both ends of the bolt atop the lumber so that the blades are supported and can freely move between the blocks
  • Place a piece of tape in the center of the blade that is lighter. The lighter blade will be the one higher in the air. Place more tape on the lighter blade at the center of gravity until the blades become balanced. Try to use long lengths of tape to minimize the amount of tape used

Tips & Warnings:


  • Electrical tape is easier to remove than other types of tape
  • Make sure the blades are tracking properly after balancing 

Package Included:


  • 2 x Replica Carbon Fibre Main Blades