Home >> Toys & Hobbies >> Radio Control >> RC Helicopters & Accessories >> Mystery MYSTERY SDS-S0307 RC Helicopter 3.7g 0.7Kg 0.1s Plastic Digital Servo

Mystery MYSTERY SDS-S0307 RC Helicopter 3.7g 0.7Kg 0.1s Plastic Digital Servo

SKU:A15690000B

Need to upgrade your dear RC helicopter? Then we would like to introduce you with this Gear Servo . Brand new MYSTERY 3.7g Plastic Gear Servo SDS-S0307. It is made of durable and high material. This is a great upgrade for your RC hobby, RC helicopter...
Retail Price:
USD$ 11.98
Wholesale Price:
 
Wholesale Price
Quantity 2-78-1920-49≥50
Price USD$ 7.33USD$ 6.46USD$ 5.59USD$ 4.43
 
Qty:
pieces
If you want to buy only 1 piece, please alter the quantity in ‘My Cart’.
Note: you could enjoy the wholesale price of this item as long as the item quantity of your order is more than 1.
  • For online wholesaler or distributor, you can buy directly online. If you want to buy more than offered quantities for better price, please click wholesale inquiry.

  • Top Selling
 
  • Overview

Specifications:


  • Weight: 3.7g
  • Speed: 0.1sec/60°(4.8V)
  • Stall Torque: 0.7kg / cm
  • Voltage: 4.2V-7.2V
  • Size: 20 x 24 x 8.0mm / 0.78 x 0.94 x 0.31in(L x W x H)
  • Temperature Range: 0℃-55℃
  • Dead Band Width: 10us

Features:


  • High quality of this Gear Servo
  • This Digital Servo is brand new
  • Plastic gear servo, but still durable
  • This RC Servo is a great upgrade for your RC hobby, RC helicopter
  • It is very easy to install, you can just install it onto your RC helicopter all by yourself
  • This RC Servo is made of durable and high quality, which is durable and lasting with long time use

Details:

Mystery MYSTERY SDS-S0307 RC Helicopter 3.7g 0.7Kg 0.1s Plastic Digital Servo


  • Brand new MYSTERY 3.7g Plastic Gear Servo SDS-S0307. It is made of durable and high material. This is a great upgrade for your RC hobby, RC helicopter

Mystery MYSTERY SDS-S0307 RC Helicopter 3.7g 0.7Kg 0.1s Plastic Digital Servo


  • With the upgrade function, your RC helicopter will function pretty better, so you can enjoy the flying time to the most

Mystery MYSTERY SDS-S0307 RC Helicopter 3.7g 0.7Kg 0.1s Plastic Digital Servo


  •  It is very easy to install, you can just install it onto your RC helicopter all by yourself even at your own home

Mystery MYSTERY SDS-S0307 RC Helicopter 3.7g 0.7Kg 0.1s Plastic Digital Servo


  • The good package can keep this product from damages during the shipment. It can assure the product be arrived just fine

NOTE:


  • Specify the connector type when you purchase the servo
  • Refer to the figure when installing the servo accessories
  • For engine powered airplanes and boats, rubber must be used to reduce vibration.
  • Please choose correct model for your application
  • Torque over-loaded will damage the servo's mechaniSM-. humid air
  • Keep the servo clean and away from dust, corrosive gas and humid air

How to Make Homemade RC Helicopters

Mystery MYSTERY SDS-S0307 RC Helicopter 3.7g 0.7Kg 0.1s Plastic Digital Servo


Flying RC helicopter is really very exhilarating. Their versatility gives a RC pilot a complete access to the three-dimensional space in such a way that no other machines can! I have played RC helicopter for more than one year but still find that I have just learnt a few tricks that it can perform.


There are generally two micro-helicopters ( indoor ) in the RC market. I have already planned to buy one of them as they can fly inside the living room and even take off on ours hand. Unlike those operated by gas, these electric helicopters are very clean and give out no terrible noise at all. In one nightfall, I visited a web site, which is about how to make a hand made RC helicopter. I was totally impressed and started designing my own helicopter. Here is my helicopter:


Instructions:

Mystery MYSTERY SDS-S0307 RC Helicopter 3.7g 0.7Kg 0.1s Plastic Digital Servo


  • The plan of the helicopter had finally been completed. It is not very well drew. The current plan available is only for the fixed pitch design. Please click the above photo for the plan.
  • Making the main body
  • The material that I use to make the main body of the helicopter would make you feel surprise. It is the circuit board ( after removing the copper layer ) that purchased from electronic shops. It is made of a kind of fiber which gives abnormal strength to it
  • Would you think it is just too simple? Well, it is really a very simple design as the tail rotor is powered by a separate motor. This eliminates the needs not to construct a complicated power transfer unit from the main motor to the tail. The tail boom is simply fixed on the main body by 2 screws together with some epoxy adhesive
  • Make sure that the aluminum ball placed in the rod end can be moved freely. 2 holes were drilled on the plastic spacer in order to house two screws that used to hold the ball linkage
  • In my design, the swashplate is fixed on the main shaft. This is simply done by applying some glue between the aluminum ball and the shaft
  • My instructions are too confusing? Here is my draft of the swashplate which might help you. I still find that my design is a little bit too complex. If you have a better design, please let me know!
  • For the rotor head, I choose the same material as the main body - the circuit board. First of all, I have to claim that the rotor head must be sturdy enough to withstand any vibration or it could be very dangerous.The control system I used here is the Hiller system. In this simple control system, the cyclic controls are transmitted from the servos to the flybar only and the main blade cyclic pitch is controlled by the flybar tilt only
  • There is a metal bar ironed perpendicularly to the flybar. It holds the metal ball of the ball link in position. Here is how the ball link is made
  • The rob ends are shortened and a metal bar is used to connected them together. the metal bar should be inserted deep into the rob ends and fixed with epoxy adhesive
  • In addition to the ball link, an "H" shaped anti-rotating unit is a must for the control system. It helps to keep the ball link in position. The materials needed are showed in the above photo.(19)
  • In order to stop the lower part of the swashplate from moving, an anti-rotation unit is also needed here. It is simple a small board with two pins inserted on it
  • Here is the measurement of the tail blade. It can be shaped easily from a 2mm thick balsa. the tail blades make an angle of ~9°on the blade holder
  • The photo shows all the things that the tail part consists. The two balsa blades are hold by a hardwood holder which helps to give a fixed tail pitch. It is then secured on the gearwheel by 2 screws. The motor is simply glued on the tail boom by epoxy adhesive and the tail shaft holding tube with the same way on the motor.The tail blade is made of balsa. They are covered with heat shrink tube in order to reduce the friction between the blade and the air.The pitch and the weight of the two blades must be exactly the same. Tests must be performed to ensure that no vibration occur
  • Only two servos are used in my design. One is for the elevator and the other one is for aileron. In my design, the aileron servo is installed between the motor and the main shift holding tube. In this way, the tube has made use of the sturdy plastic case of the servo as one of its supporting medium
  • This arrangement gives extra strength to the main shift holding tube as one side of the servo is glued to the motor while the other side is glued to the tube. However, the mobility of the servo as well as the motor is lost
  • In a fixed pitch design, only 2 servos are needed.A computerized Tx is needed as the the tail control must be mixed with the throttle control. For a Piccolo micro helicopter, this task is performed by the Piccoboard. For my design, this is done by the function "Revo-Mixing" in the Tx
  • now you can play with your home made heli.... enjoy it

Package Included:


  • 1 x MYSTERY 3.7g Plastic Gear Servo
  • 1 x Set of Accessories