Home >> Security & Surveillance >> Surveillance DVR >> Portable 2.4GHz 4 Channels Wireless DVR WVR620

Portable 2.4GHz 4 Channels Wireless DVR WVR620


Deluxe ver 2.4GHz 4 channels wireless sending/receiving, portable external digital video recorder, standard memory: 128MB SD card, supporting max: 2GB SD card, connect 1 wireless camera and 1 wired camera, with function of PIP, security CCTV DVR syst...
Retail Price:
USD$ 245.38
Wholesale Price:
Wholesale Price
Quantity 2-45-910-29≥30
Price USD$ 114.41USD$ 109.09USD$ 103.76USD$ 96.67
Power Adapter:
If you want to buy only 1 piece, please alter the quantity in ‘My Cart’.
Note: you could enjoy the wholesale price of this item as long as the item quantity of your order is more than 1.
  • For online wholesaler or distributor, you can buy directly online. If you want to buy more than offered quantities for better price, please click wholesale inquiry.

  • Top Selling
  • Overview


  • Work Voltage: DC12V
  • Work Current: 500mA
  • Frequency: 2.4GHz
  • Emissive Power: 80mW
  • Temperature: -10℃~+50℃
  • Standard Memory: 128MB SD Card
  • MAX Memory: 2GB SD Card
  • Photo Format: JPEG
  • Photo Pixel: 640 x 480
  • Video Format: AVI
  • Video Pixel: 320 x 240
  • Frames/SEC: 10fps
  • Time of Video Clip: 10s/pc
  • Condensation: Motion JPEG
  • Signal of Record: One Way Video
  • Video Input: 75Ω Typ.1vp-p
  • Video Output: 75Ω Typ.1vp-p


  • Immediately getting into the work state of detect motion object after power on
  • Automatically take photos/record when detect the motive objects
  • If the object is immobile or the object stops moving, DVS does not record or stop recording
  • Use 2.4GHz (4 channels ) wireless work frequency for wireless sending and receiving
  • 128Mb SD card which can store about 2000 pieces of picture/400 video clips, without flash memory
  • Supporting maximally 2G SD card ,can store about 28800 pieces of picture/4850 video clips
  • Memory tenet is "First in, First out", automatically overwrite former images
  • Connect 1 wireless camera and 1 wire camera ,with function of PIP , but only record the main pictures
  • Supporting all kinds of CCTV cameras (CCD, CMOS)
  • With ports of outside triggers shooting and motion detect signal trigger output
  • Can combine with all kinds of alarm system or visual doorphone system which form newly shooting alarm system
  • The stored pictures/video clips will not lose when power off
  • Supporting outputting video signal of NTSC/PAL
  • The parameters (Date, time, Detecting area, Sensitivity and interval time etc.)
  • The recording date as file name ,the format of picture is JPEG, and the format of video is AVI
  • Lookup the photo and video by the record date (time)
  • Has the simple operation menu ,no need to install software
  • Support playback the images on TV/monitor, or computer (by SD reader)


Portable 2.4GHz 4 Channels Wireless DVR WVR620

  • Portable 2.4GHz 4 Channels Wireless DVR 

Portable 2.4GHz 4 Channels Wireless DVR WVR620

Portable 2.4GHz 4 Channels Wireless DVR WVR620

  • Use 2.4GHz (4 channels ) wireless work frequency for wireless sending and receiving

Portable 2.4GHz 4 Channels Wireless DVR WVR620

Portable 2.4GHz 4 Channels Wireless DVR WVR620

  • Accessories included

How to Replace a DVR Hard Drive:

  • Disconnect your DVR by unplugging any cables connected to it, including the power cable. Remove the screws located on the back of the unit that hold the top cover in place. There are usually two to six of these screws, depending on the model of DVR. Lay these screws in a safe place where they won't get lost, and slide the cover off
  • Locate the hard drive. This is a rectangular metal unit that measures 3 1/2 inches wide. It is usually located away from the other hardware, often in its own bracket. There will be two to four screws holding it in place. Remove these, disconnect the cables connected to the drive, and slide it out of the system
  • Check the label of the drive to see if it is IDE or SATA. It will say which one of the two interfaces it uses. Any replacement desktop hard drive of the same interface type will work in your DVR. Avoid using a laptop drive, because they won't fit and aren't designed for the high-stress environment of video streaming
  • Place the new drive into the brackets, and replace the screws that were removed from the old one. Plug the data and power cables into this drive. They will insert the same way they came out of the old one. Once the drive has been installed, put the cover back on the DVR unit, and replace the screws. Hook the DVR back up to the television, and it will be ready to record

How to Copy From a DVR to an External Hard Drive:

  • Install video software on your computer. To properly process your data transfer, you need video software, which you can get from computer and electronics retailers or online. Simple, easy-to-use programs can be downloaded for free. Use reputable sites, such as CNET.com, to find some of the more reputable free programs. More advanced programs, with sophisticated editing capabilities, will usually only be available for purchase
  • Connect your computer and DVR. In order to copy programs to your external hard drive, you need to transfer them to your computer. For older systems, and especially for desktop computers, you will need to use use RCA connectors to connect the DVR to the computer. RCA connectors are color-coordinated audio-visual cables used to connect electronics components, such as stereos and receivers, and they can be used with some computers and DVRs as well. Plug the yellow ends of the cable into the video jacks on the machines, then plug the red and white ends into the audio jacks. If you have a newer system, use USB cables to connect the computer and DVR. With a TiVo DVR and a wireless home network, you can connect your components wirelessly if you download proprietary TiVo software
  • Transfer the program to your computer. Choose the program you wish to transfer from your DVR then press "Play" while pressing "Record" on your computer software program. The program should transfer in real-time. Monitor the recording and, when finished, check for quality
  • Copy the program to your external hard drive. Using the video software on your computer, select your external drive as the destination for your next copy. Select the copy you just made from the DVR and make another copy on your external hard drive. Again, monitor the transfer and check for quality when you are finished

Package Included:

  • 1 x 2.4GHz Wireless Recorder 
  • 1 x DC5V Adapter for Recorder 
  • 1 x Detect Signal Output Control Wire 
  • 1 x Video Wire 
  • 1 x Instruction