Home >> Security & Surveillance >> Home Alarm >> Fusionsea 8CH RF Wireless Remote Control Transmitter & Receiver

Fusionsea 8CH RF Wireless Remote Control Transmitter & Receiver

SKU:A0249000AJ

Do you want to see movies or other programs at your other room without moving your TV from the living room?It seems impossible in the past. But your dream can be realized with this item--- 8CH RF Wireless Remote Control Transmitter & Receiver. Th...
Retail Price:
USD$ 53.38
Wholesale Price:
 
Wholesale Price
Quantity 2-56-1415-39≥40
Price USD$ 17.28USD$ 16.66USD$ 16.04USD$ 15.21
 
Qty:
pieces
If you want to buy only 1 piece, please alter the quantity in ‘My Cart’.
Note: you could enjoy the wholesale price of this item as long as the item quantity of your order is more than 1.
  • For online wholesaler or distributor, you can buy directly online. If you want to buy more than offered quantities for better price, please click wholesale inquiry.

  • Top Selling
 
  • Overview

Specifications:


  • This is a 8CH RF Wireless Transmitter Receiver set
  • The Remote Control Transmitter Receiver set is with audio/video output
  • The Transmitter Receiver set can be wireless connected camera or TV set and other monitoring kit video transmission
  • It is capable of receiving distant signals and transmitting high fidelity signals

Receiver:


  • Radio Frequency: 315MHz
  • Operating Voltage: 12V DC
  • Sensitivity: >= -105 dB
  • Operating Temperature: -40℃ to 80℃
  • Operating Type: Momentary (Press->ON, Release->OFF)
  • Operating Type: Relay: 3A 120V AC
  • Dimension: 100 x 60 x 26mm/3.9 x 2.4 x 1.0in (L x W x T)

Transmitter:


  • Radio Frequency: 315 MHz
  • Operating Voltage: 23A 12V DC battery
  • Transmitting Distance: 100m
  • Dimension: 125 x 50 x 20mm/4.9 x 2.0 x 0.8in (L x W x T)

Details:

Fusionsea 8CH RF Wireless Remote Control Transmitter & Receiver


  • It is capable of receiving distant signals and transmitting high fidelity signals

 Fusionsea 8CH RF Wireless Remote Control Transmitter & Receiver


  • With the real-time transmission function, audio and video signals can be transmitted effectively

Fusionsea 8CH RF Wireless Remote Control Transmitter & Receiver


Fusionsea 8CH RF Wireless Remote Control Transmitter & Receiver


Fusionsea 8CH RF Wireless Remote Control Transmitter & Receiver


  • It can be wireless connected camera or TV set and other monitoring kit video transmission

Receiver Installing:


  • Use 12V 800mA power
  • On the Receiver's face, have a digital display, it's show Receivers frequency, on this digital. display, 0, 1, 2, 3 is means 0.9G CH1, CH2, CH3, CH4, and 4, 5, 6, 7 is means 1.2G CH1, CH2, CH3, CH4, and 8, 9, H, C is means 1.3G CH1, CH2, CH3, CH4
  • Push the Control button, can change the Receiver frequency and channel
  • Make sure the Transmitter and Receiver are set to the same channel

Transmitter Installing:


  • The Suit Has Two Wire: one is audio & video connect wire, have two red plugs and two white plug, is connect receiver to the monitor or TV. Another wire is message connect wire, have 5 plug. White and square plug is connect transmitter, yellow plug connect camera's video, white plug connect camera's audio, red plug connect DC 12V, and black plug connect camera's power input jack
  • Select Transmitter Frequency: Change transmitter's small switch place can change transmit frequency like the following picture
  • Setting the same channel with transmitter and receiver

Attention:


  • Should install it at the place where children cannot touch
  • Do not expose it at the dam place for preventing it from water or protecting people from electric shock
  • Please pull the transformer out when you stop using it
  • Please use the transformer produced by our company. Or our company will not be in charge of any damage incurred by the product
  • Our company will not be responsible for any damage incurred by your amending or dismounting without a permit
  • Do not touch the emission antenna in case you will be burned when the transmitter is electrified

How to Build a RF Transmitter Receiver:


  • Punch four holes in the side of your sturdy plastic bottle, such as a shampoo bottle, with a nail. There will be two sets, one located near the top and one near the bottom. The holes in each set will be spaced about a half-inch apart running parallel to the top and bottom of the bottle
  • Thread one end of your magnet wire through the top two holes and pull about 8 inches through
  • Wind the long end of the wire tightly around the bottle, making sure each wrap touches the wind before it. After every five winds of the wire, wrap a small loop around a pencil or pen so that you will have a series of small loops that stand out from the other windings. These are called wire taps (see reference 1). Continue winding in this pattern until you reach the bottom of the bottle. Remove the pen or pencil from the smaller windings
  • Thread the end of the wire through the holes punched in the bottom of the bottle. Use wire cutters or a sharp knife to strip both free ends of the wire as well as the wire taps of vinyl coating to reveal the bare magnet wire underneath. Do not strip any coating from the wire wrapped around the bottle
  • Solder a Germanium diode to the wire end at the bottom of the bottle
  • Cut and strip off one end of a telephone cord to reveal the four inner wires. Locate the yellow and blue wires---the wires that are used to transmit the audio signal in the handset---and solder one to the free end of the Germanium diode. Wire the other to the wire end at the top of the bottle. The color wire you attach to each end will not matter, as you are simply completing a circuit. Connect the uncut end of the cord to a telephone handset
  • Ground the radio receiver by clipping an alligator jumper to a bare portion of the wire coming from the top of the bottle. Clip the free end to a solid piece of metal with a good connection to the earth, such as a pipe
  • Clip one end of an alligator jumper to between 50 feet and 100 feet of standard insulated wire. This will act as an antenna. Connect the free end of this jumper to one of the bare coil taps on the bottle. You should now be able to hear radio stations coming through the telephone handset. The coil tap the jumper is connected to will determine the station. You may need to adjust the antenna or string it to a high point such as a tree branch to get a clear signal

Package Included:


  • 1 x Remote Control
  • 1 x Receiver