Home >> Electronics >> Home Audio & Video >> A/V Accessories & Cables >> Youngshine Electrical Flat TV Coaxial Socket HDMI Outlet Wall Panel

Youngshine Electrical Flat TV Coaxial Socket HDMI Outlet Wall Panel

SKU:A13780000G

Do you want to replace your Electrical Panel and use them for a long time? This Electrical Panel must be a good product which can meet your needs. TV Coaxial Socket HDMI Outlet Wall Panel Cover, it is a convenient way to connect to your HDMI display ...
Retail Price:
USD$ 19.24
Wholesale Price:
 
Wholesale Price
Quantity 2-78-1920-49≥50
Price USD$ 7.30USD$ 7.21USD$ 7.11USD$ 6.98
 
Qty:
pieces
If you want to buy only 1 piece, please alter the quantity in ‘My Cart’.
Note: you could enjoy the wholesale price of this item as long as the item quantity of your order is more than 1.
  • For online wholesaler or distributor, you can buy directly online. If you want to buy more than offered quantities for better price, please click wholesale inquiry.

  • Top Selling
 
  • Overview

Specifications:


  • Distinctive and superior designed HDMI Electrical Panel is ideal for in-wall installation
  • It is a convenient way to connect to your HDMI display and television without the cables mess coming out of the wall
  • Easy-to-use HDMI outlet Electrical Panel has a HDMI jack and a TV coaxial socket
  • HDMI features an female jack on the front and another female jack on the back thus, allowing you to run your HDMI cable behind your wall
  • This TV coaxial Electrical Panel also helps you save that cable that is now buried from wear and tear
  • They keep the room from being cluttered with visible or hanging wires. Make sure that your HDMI equipment is certified by HDMI
  • Material: Plastic
  • Size: Approx. 8.5 x 8.5 x 1.0cm/3.4 x 3.4 x 0.4in(L x W x H)

Details:

Youngshine Electrical Flat TV Coaxial Socket HDMI Outlet Wall Panel


  • This is a durable TV Coaxial Socket HDMI Outlet Flat Panel which is professional

Youngshine Electrical Flat TV Coaxial Socket HDMI Outlet Wall Panel


  • It is a convenient way to connect to your HDMI display and television without the cables mess coming out of the wall

Youngshine Electrical Flat TV Coaxial Socket HDMI Outlet Wall Panel


  • Easy-to-use HDMI outlet wall plate has a HDMI jack and a TV coaxial socket.

Youngshine Electrical Flat TV Coaxial Socket HDMI Outlet Wall Panel


  • HDMI features an female jack on the front and another female jack on the back thus, allowing you to run your HDMI cable behind your wall

Youngshine Electrical Flat TV Coaxial Socket HDMI Outlet Wall Panel


  • This TV coaxial wall plate also helps you save that cable that is now buried from wear and tear

How to Install an HDMI Wall Plate?


Youngshine Electrical Flat TV Coaxial Socket HDMI Outlet Wall Panel

An HDMI wall plate is similar to a wall receptacle or a wall plate with the difference being that a HDMI wall plate can accommodate an HDMI hookup as opposed to having to travel the wiring to a power outlet plug. These wall plates are very affordable and look much nicer than old-fashioned outlets and plugs. HDMI wall plates can be used for flat-screen TVs, entertainment centers and computers. They keep the room from being cluttered with visible or hanging wires. Make sure that your HDMI equipment is certified by HDMI.


  • Turn off electricity before doing any electrical work. The electricity of the whole house should be turned off completely so you can work on installing the wall plate safely. 
  • Determine where the main panel of your kit will be mounted. Measure up from the bottom of the wall and make a mark with a pencil where the middle of the panel will be.
  • Put the template that came with your installation kit against the mark you made on the wall. Hold it in place with small pieces of masking tape. Try to tape in the center so that if the tape leaves a mark, it will be hidden by the TV or whatever you place on the bracket.
  • Take the two smaller panels out of the box. Trace around the outside of one of the smaller panels inside the right-hand side of the large template.
  • Determine the location on the wall of the second panel. It should be horizontal with any power outlets on the wall and line up vertically with the first panel. Hold the second panel up to the spot where it is going to placed and trace around it.
  • Use the sheetrock saw to cut out the boxes for the smaller panels from the locations you have drawn on the wall.
  • Straighten out the electrical wire that came with kit. Make a small loop on one end to use as a hook so it will not fall through the wall as you start to snake it.
  • Snake the wire by holding the hooked end and dropping the other end gradually from the top hole you have cut down to the bottom hole. Work the wire down slowly and when it cannot go any farther, hook the length you made a loop from onto the edge of the top hole. Pull about 4 inches of wire out from the bottom hole.
  • Find the two electrical work boxes included in the kit. Take one and locate the tabs on the back. Break one tab off with the blade of the screwdriver.
  • Feed the wire from the upper hole in the wall through the hole you made by removing the tab. Leave 6 inches of wire hanging out of the box. Compress the ears on the sides of the box and push it into the wall.
  • Secure the box using, the screws that came with the kit. The screw holes are on the four corners of the box. Screw them in tightly. Repeat Steps 8 to 10 with the other work box and the lower hole.
  • Find the recessed cable plate with the power receptacle without the wire leads. You are going to install this in the top box. Take hold of the wire coming out of the wall. You will see three ends. One is bare copper; one is white, and one is black.
  • Connect the bare copper end to the green grounding screw on the back of the cable plate. Connect the white end to the silver grounding screw on the back of the cable plate. Connect the black end to the brass grounding screw on the back of the cable plate. The wire ends should just twist into the grounding screws. Secure each connection with a screwdriver.
  • Compress the ears on the side of the cable plate. Carefully push the cable plate into the wall. There are four holes located in each corner of the cable plate. Screw the cable plate into the wall with the screws found in the kit.
  • Take the other recessed cable plate with the power receptacle. Hold the wire coming out of the bottom wall in one hand and the recessed cable plate with the power receptacle in the other.
  • Attach the wires coming out of the wall to the receptacle in this order: Green wire goes with the bare copper; black will go with black; and the white to the white end of the receptacle. Hold each end together and twist a wire nut over each set of wires.
  • Compress the wings on the side of the receptacle and push into the wall. Fasten to the wall by screwing the provided screws into the holes in the corner of the plate.
  • Bring power to the outlet by using the HDMI-approved 6-foot extension cord. Place the female end into the outlet in the bottom recessed cable plate with the power receptacle. Plug the male end in the nearest power source or surge protector. You can now install whatever equipment you would like.

Package Included:


  • 1 x Wall Panel