Home >> Security & Surveillance >> Surveillance Accessories >> Video & Power with Cable Signal Protector for Surveillance Cameras OVP-MPD-3-24AC

Video & Power with Cable Signal Protector for Surveillance Cameras OVP-MPD-3-24AC

SKU:A0795000NQ

OVP Protective Devices (Multi MPD) series of monitoring camera surge protector according to IEC and itu-t is related with the camera, lightning standard specific requirements and can be designed for the camera into/dc power supply, video audio, contr...
Retail Price:
USD$ 304.78
Wholesale Price:
 
Wholesale Price
Quantity 2-45-910-29≥30
Price USD$ 139.90USD$ 134.37USD$ 128.83USD$ 121.45
 
Qty:
pieces
If you want to buy only 1 piece, please alter the quantity in ‘My Cart’.
Note: you could enjoy the wholesale price of this item as long as the item quantity of your order is more than 1.
  • For online wholesaler or distributor, you can buy directly online. If you want to buy more than offered quantities for better price, please click wholesale inquiry.

  • Top Selling
 
  • Overview

Specifications:


  • OVP Protective Devices (Multi MPD) series of monitoring camera surge protector according to IEC and itu-t is related with the camera
  • It can be designed for the camera into/dc power supply, video audio, control circuit implementation surge protection
  • 10KA can reach the highest discharge current
  • Maximum Continuous Working Voltage: 30V
  • Load Current: 3A
  • Limit Voltage L-N: ≤150V
  • Limit Voltage L/N-PE: ≤150V
  • Nominal Discharge Current (8/20μs): 3KA 
  • Maximum Continuous Working Voltage: 1.5V
  • Limit Voltage: 10MHz(insertion loss<0.2dB)

Details:

Video & Power with Cable Signal Protector for Surveillance Cameras OVP-MPD-3-24AC

Precaution:


  • The product series, use thunder device will be installed according to the corresponding interface and protection device access between perimeter, and tighten the wall or thunder device distribution box,
  • The lightning strict inspection, components, without special maintenance at ordinary times when the panel said lightning lights out work is lost, the lightning protection function of the fault detection and measurement of the resistance between input and output video, should be Ω than 8, the control signal should be more than 15 Ω, power supply should be Ω than 1, the core of resistance between Ω experiment.it 10M. If the data measured failure to satisfy the above-mentioned requirements, a fault, should be timely product change
  • To good grounding, lightning device should be short, lightning ground thick, straight, grounding resistance shall conform to the relevant national standards
  • When installing outdoor alone additional configuration waterproof

How to Connect a Cable to a Monster Surge Protector:


  • Monster Cable makes several types of surge protectors, ranging from simple power strips to full-blown entertainment PowerCenters. Whichever model you have, the procedure for connecting your cables is similar. Since surge protectors are useless when plugged into ungrounded wall outlets, verify that your wall outlet is wired properly before attaching your audio and video components to the surge protector; if you're not sure that your home's wiring is up to snuff, Monster recommends asking an electrician to take a look at it.

Instructions:


  • Verify that all satellite dishes, television and radio antennas, and other rooftop devices you will connect to your Monster surge protector are properly grounded. (Check with the devices' manufacturers to find out how to determine this.) Doing so will help prevent voltage surges from compromising your surge protector and possibly damaging your audio and video components
  • Choose a three-pronged (grounding) outlet far away from potential foot-traffic problems. Behind your home entertainment system or in a corner is best
  • Plug each of your audio and video components into its recommended outlet on the surge protector: Monster surge protectors have different types of outlets for different components. This allows the surge protector to "clean" the signal for each type of component so as to minimize static and interference. Reference the Monster manual for your particular surge protector if there's any doubt
  • Plug coaxial cables into the proper outlets. For example, connect your satellite's coaxial cable to the "Satellite In" outlet. Then connect the "Satellite Out" coaxial cable to your TV or cable box. Do the same for any other types of communication cables you have, such as phone or Ethernet. Depending upon your setup, purchase additional cables if necessary
  • Plug your Monster surge protector into the wall grounding outlet after connecting all your components.
  • Turn the surge protector on with its power switch

Package Included:


  • 1 x Video & Power with Cable Signal Protector