Home >> Security & Surveillance >> Home Alarm >> Harxsh Wireless 4 Buttons Metal Remote Control RC-527

Harxsh Wireless 4 Buttons Metal Remote Control RC-527

SKU:A06230000A

Do you want to have an automation and remote control system for your house or in the office? Here this wireless remote control is a great choice for you! Made of durable and high material, the House Remote Control is durable and reliable for long tim...
Retail Price:
USD$ 9.42
Wholesale Price:
 
Wholesale Price
Quantity 2-78-1920-49≥50
Price USD$ 5.46USD$ 4.85USD$ 4.24USD$ 3.43
 
Power Adapter:
Qty:
pieces
If you want to buy only 1 piece, please alter the quantity in ‘My Cart’.
Note: you could enjoy the wholesale price of this item as long as the item quantity of your order is more than 1.
  • For online wholesaler or distributor, you can buy directly online. If you want to buy more than offered quantities for better price, please click wholesale inquiry.

  • Top Selling
 
  • Overview

Specifications:


  • Working Voltage: 12V (12V/23Abattery)
  • Work Current: More than 8mA
  • Working Temperature: - 35 °C+ - 65°C
  • Transmit Frequency: 315MHz (± 75K)
  • Transmitting Distance: >80m

Features:


  • This is a 100% brand new wireless House Remote Control
  • It is made of durable and high material
  • Convenient operation by remote control of using this Wireless Remote Control
  • Enlarged button much easier for press of this Wireless Remote Control
  • SMT technique of this Room Remote Control

Details:

Harxsh Wireless 4 Buttons Metal Remote Control RC-527


  • Wireless metal remote control. This is a 100% brand new wireless metal remote control with good quality

Harxsh Wireless 4 Buttons Metal Remote Control RC-527

Harxsh Wireless 4 Buttons Metal Remote Control RC-527


  • Convenient operation by remote control.  Its mature design with metal finish, makes this Metal Remote Control a "must have" for your home or office

Harxsh Wireless 4 Buttons Metal Remote Control RC-527


  • More details for this remote control. This House Remote Control is made of durable and high material

Harxsh Wireless 4 Buttons Metal Remote Control RC-527

Harxsh Wireless 4 Buttons Metal Remote Control RC-527


  • With keychain design, easy and convenient to take the Wireless Remote Control with you

About Wireless Remote Control:


  • Wireless remote controls are designed to control a wide variety of electronic devices with a wireless signal
  • With the press of a button, the device can turn on, off, adjust its own volume and perform any number of device-specific tasks
  • If you have a universal wireless remote and you can program it to work with a certain device

How to Build a Wireless Remote Control:

Harxsh Wireless 4 Buttons Metal Remote Control RC-527


  • Open the remote control housing and place a push button switch on the side. In the upper right corner of the housing, fasten a 3-volt battery holder. Be sure enough room is available to install and remove the battery.
  • Run a wire from the push button switch and link to the 3-volt battery holder at the negative connection. Attach another wire to the push button switch and lead it to the Meg 1/4W resistor and the NPN silicon transistor. Run a third wire from the Meg 1/4W resistor and attach it to the 22K 1/4W resistor and and the PNP silicon transistor.
  • Position the infra-red LED on the front of the housing. Attach the LED and run wires to both transistors. From the 22K 1/4W resistor, run a wire to the C220.01uF 16v ceramic disk capacitor. Run another wire between the NPN silicon transistor and the ceramic disk capacitor.
  • From the positive connector on the 3-volt battery holder, connect a wire to the PNP silicon transistor. This will allow for proper current flow in a closed circuit. Ensure the push button switch is positioned to "off" and place a 3-volt battery into the holder. Close the remote control housing.
  • Point the remote control at a receiver, making sure the LED on the control is aimed at the LED of the receiver. Push the button and the receiver should power on and off. To adjust the receiver to be programmed, point the remote control and hold down the push button switch. Adjust the pot or taper on the receiver until you hear a click. This links the remote control and the receiver.

How to Reset a Remote Control:


Harxsh Wireless 4 Buttons Metal Remote Control RC-527

If you want to add another remote control for your garage door opener or need to replace a dead battery and reprogram an existing remote, chances are you'll have to reset the opener with the base unit for it to work. The process involves just a few steps and is relatively easy to do


  • Replace the battery by opening the remote, taking out the old one(s) and putting in the new one(s). Make sure you buy the right battery for your remote. Match the battery type, size and voltage that came with the remote
  • Use a step ladder to access the garage door motorized unit, usually equipped with a safety light. Locate the reset or "learn" button on the unit. Many times, this small button is recessed, so you might need a pen or pencil to reach it
  • Push the reset or "learn" button on the opener. While the reset indicator light is blinking for about 30 seconds, point your remote at the opener, then press and hold the remote button that opens the door, and the reset light should stop blinking and glow steady to indicate the controller and opener are now synchronized. If the process doesn't work the first time, try again to make sure you pressed your button during the time when the indicator light is blinking

Package Included:


  • 1 x Remote Control