Home >> Security & Surveillance >> Surveillance Cameras >> Sorlia Wireless Inspection CMOS Camera with Color 2.36" TFT-LCD Monitor SR-015

Sorlia Wireless Inspection CMOS Camera with Color 2.36" TFT-LCD Monitor SR-015

SKU:A13350000O

This best Wireless CMOS Inspection Camera is the perfect way to get things done while keeping a close eye on your little one.Wireless inspection camera with color 2.36 inch TFT-LCD monitor, CMOS camera horizontal view angle 50 degree, the monitor not...
Retail Price:
USD$ 365.98
Wholesale Price:
 
Wholesale Price
Quantity 2-45-910-29≥30
Price USD$ 186.67USD$ 167.10USD$ 147.54USD$ 121.45
 
Qty:
pieces
If you want to buy only 1 piece, please alter the quantity in ‘My Cart’.
Note: you could enjoy the wholesale price of this item as long as the item quantity of your order is more than 1.
  • For online wholesaler or distributor, you can buy directly online. If you want to buy more than offered quantities for better price, please click wholesale inquiry.

  • Top Selling
 
  • Overview

Specifications:

Sorlia Wireless Inspection CMOS Camera with Color 2.36

Sorlia Wireless Inspection CMOS Camera with Color 2.36

Sorlia Wireless Inspection CMOS Camera with Color 2.36

Sorlia Wireless Inspection CMOS Camera with Color 2.36

Camera:


  • Imaging Sensor: CMOS
  • Total Pixels: 704 x 576(PAL); 712 x 486(NTSC)
  • Horizontal View Angle: 50 degree
  • Transmission Illumination: 0 Lux
  • Modulation Type: FM
  • Bandwidth: 18MHz
  • Power Supply: 4 x AA batteries
  • Waterproof Capacity: IP67(only for imager head)

Sorlia Wireless Inspection CMOS Camera with Color 2.36

Sorlia Wireless Inspection CMOS Camera with Color 2.36


Monitor:


  • LCD Screen Type: 2.36 inch TFT-LCD
  • Effective Pixels: 480 x 240
  • Video System: PAL/NTSC
  • Transmission Frequency: 2468MHz
  • Exterior Supply Voltage: 8V-24V
  • Consumption Current (Max.): 490mA
  • Video Output Level: 0.9-1.3Vp-p@75ohm

Sorlia Wireless Inspection CMOS Camera with Color 2.36

Sorlia Wireless Inspection CMOS Camera with Color 2.36

Sorlia Wireless Inspection CMOS Camera with Color 2.36


  • This is Wireless CMOS Inspection Camera with Color 2.36" TFT-LCD Monitor
  • The Wireless CMOS Inspection Camera supports many kids of languages menus and featuring simple operation
  • This CMOS Inspection Camera suitable for underwater surveillance and the survey at the dark corner

How to Clean an Underwater Camera:


  • As you learn how to clean an underwater camera, make sure to inspect all cover doors regularly, including the ones for the battery and USB port. These should be free from debris and anything else which may allow water to leak into the underwater camera
  • Remove any dirt or debris with a soft, lint free cloth. Take care to also remove any drops of water with the same type of cloth. This should be done both before and after each use
  • Inspect visually all waterproof casings and seals, to make sure that there are no cracks or tears. Make sure that all doors close properly, and that the camera is not damaged in any way. If there is visible damage, do not use the camera underwater until the casings are replaced
  • Fill the bucket with fresh water, making sure that it is free from any salt or other chemicals, as this could cause damage to the camera
  • Close all doors on the camera, making sure that it is securely sealed. Immerse it into the bucket, with the lens facing downwards
  • Open and close the lens cover a number of times, this is usually done by pressing the power button. This will make sure that any dirt or other obstructions are removed, preventing the lens cover from becoming stuck or damaged
  • Remove the underwater camera from the bucket of water and gently shake off any excess liquid. Dry it using a clean cloth, then leave to air dry with all of the doors open. Now you know how to clean an underwater camera

Tips & Warnings:


  • It is recommended that the waterproofing seals on any underwater camera are checked, and usually replaced, every year. This helps to maintain the waterproof feature and reduce risk of damage
  • Do not use any cleaning chemicals on your camera, as this could compromise the waterproofing features. Make sure that the water which you use is clean and fresh, free from salt and other substances. Make sure that you do not pour cold water directly onto it; it is safer to gently immerse into a bucket
  • Avoid leaving your underwater camera in water for prolonged periods of time, as this also deteriorates both the appearance of the camera, and its waterproofing abilities

Package Included:


  • 1 x Camera
  • 1 x LCD Monitor
  • 1 x Adapter for Monitor
  • 1 x Adapter Cable
  • 1 x Accessory Hook
  • 1 x Accessory Magnet
  • 1 x Accessory Mirror
  • 1 x Extended Tube(Optional)
  • 1 x Video Output Cable(Optional)