Home >> Security & Surveillance >> Home Alarm >> Zrabra Wireless Remote Control Switch System AK-RK01S+AK-D01

Zrabra Wireless Remote Control Switch System AK-RK01S+AK-D01


Looking for a wireless remote control? Want you life to be easier and more convenient? If you do, you have got a right place. Here this receiving system will show your high quality life and make your life more relaxed. We highly recommend this wirele...
Retail Price:
USD$ 15.98
Wholesale Price:
Wholesale Price
Quantity 2-78-1920-49≥50
Price USD$ 5.91USD$ 5.82USD$ 5.72USD$ 5.60
If you want to buy only 1 piece, please alter the quantity in ‘My Cart’.
Note: you could enjoy the wholesale price of this item as long as the item quantity of your order is more than 1.
  • For online wholesaler or distributor, you can buy directly online. If you want to buy more than offered quantities for better price, please click wholesale inquiry.

  • Top Selling
  • Overview


Wireless Remote:

  • Working Voltage: DC12V
  • Working Current: 30MA
  • Emission Frequency: 266-433MHZ
  • Transmitting Distance: 1000m/3280.8ft
  • Encoding Type: Fixed code, learning code, rolling code
  • Size: 8.5 x 3.7 x 1.8cm / 3.3 x 1.4 x 0.7in(L x W x H)

Wireless Remote Control Switch:

  • Operating Voltage: 12V DC
  • Operating Current: ≤ 6mA
  • Operating Frequency: 315,433 MHz
  • Operating Temperature: -40 °C  ~ +80 °C 
  • Receiver Sensitivity: ≥-105dBm
  • Output Voltage: AC / DC (optional)
  • Output Current: ≤ 10A
  • Size: 4.8 x 3.3 x 1.5cm/1.9 x 1.3 x 0.6in(L x W x H)


  • It is brand new smart wireless remote key
  • It is made of durable materials
  • It can be used for long time
  • Works with computer accessories, auto lighting kits, or other electronics
  • High quality micro key fob construction is similar to automotive keyless entry systems
  • Easy to wire with basic electrical wiring knowledge


  • Zrabra Wireless Remote Control Switch System AK-RK01S+AK-D01
  • Featured with a high-security, large memory capacity, stable performance, this wireless remote control is really a good helper for you

Zrabra Wireless Remote Control Switch System AK-RK01S+AK-D01

  • For your home convenience, you should take this high performance wireless remote control

Zrabra Wireless Remote Control Switch System AK-RK01S+AK-D01

  • With the advent of RF, users can utilize a receiving system without needing a line of sight to the item

Zrabra Wireless Remote Control Switch System AK-RK01S+AK-D01

  • The wireless remote system is practical for you daily use

Zrabra Wireless Remote Control Switch System AK-RK01S+AK-D01

Zrabra Wireless Remote Control Switch System AK-RK01S+AK-D01

  • This is a wonderful wireless digital remote switch control for home appliance, a best choice for you

How to Build a Wireless Remote Control:

Zrabra Wireless Remote Control Switch System AK-RK01S+AK-D01

Simple wireless devices use various components to activate an infra-red signal that broadcasts to a receiver box, allowing the user to program the control. Basic wireless remote controls simply turn a device on or off. Components used in a wireless device can be found at most electronics outlets and hobby shops. Specialized retail establishments have pre-packaged kits that can be used by a beginner. At the very least, even experienced electronics enthusiasts use pre-made remote control boxes due to the simplicity of their design, including ergonomic support. The structure of the wireless remote control provides a builder with not only knowledge but the reasons a receiver can be controlled by the device


  • Open the remote control housing and place a push button switch on the side. In the upper right corner of the housing, fasten a 3-volt battery holder. Be sure enough room is available to install and remove the battery
  • Run a wire from the push button switch and link to the 3-volt battery holder at the negative connection. Attach another wire to the push button switch and lead it to the Meg 1/4W resistor and the NPN silicon transistor. Run a third wire from the Meg 1/4W resistor and attach it to the 22K 1/4W resistor and and the PNP silicon transistor
  • Position the infra-red LED on the front of the housing. Attach the LED and run wires to both transistors. From the 22K 1/4W resistor, run a wire to the C220.01uF 16v ceramic disk capacitor. Run another wire between the NPN silicon transistor and the ceramic disk capacitor
  • From the positive connector on the 3-volt battery holder, connect a wire to the PNP silicon transistor. This will allow for proper current flow in a closed circuit. Ensure the push button switch is positioned to "off" and place a 3-volt battery into the holder. Close the remote control housing
  • Point the remote control at a receiver, making sure the LED on the control is aimed at the LED of the receiver. Push the button and the receiver should power on and off. To adjust the receiver to be programmed, point the remote control and hold down the push button switch. Adjust the pot or taper on the receiver until you hear a click. This links the remote control and the receiver

How to Route an RF Remote Control System:

Zrabra Wireless Remote Control Switch System AK-RK01S+AK-D01

A remote control using RF (radio-frequency) signals does not require line-of-sight in order to function--unlike the more commonly used infrared (IR) remote. To use an RF remote with an electronics device that relies on an IR signal, use a RF signal receiver with the RF remote. The procedure for routing an RF control system to properly function with electronic devices is straightforward. No special tools or additional equipment are necessary other than the RF control system


  • Place the RF receiver that comes with the RF remote control system next to the electronic device that is going to be controlled; the device may be in an enclosed space like a closet or on a shelf inside a cabinet
  • Route the power cord from the RF receiver to a nearby power outlet and plug it in for power; the outlet could be a wall outlet or on the back of an electronic device (for example, an amplifier).
  • Extend the external antenna attached to the RF receiver. Angle the tip of the antenna in the general direction of where the RF remote is typically to be used (for example, towards the living room or bedroom)
  • Plug the IR extender cable's plug into the port on the back of the RF receiver. Route the IR extender cable over to the front of the electronic device
  • Play the beam of a flashlight across the length of the electronic device's front panel until you see the small square that denotes the placement of its IR receiver
  • Tape the LED bulb at the end of the IR extender cable to the electronic device's front panel where the IR receiver is located with a strip of masking tape
  • Turn the RF receiver over. Change the setting switch on the bottom to one of the RF channels with the tip of a flat-edged jeweler's screwdriver. Turn the RF receiver back right side up
  • Change the channel on the RF remote to match that of the RF receiver; the switch can be changed using your fingers 

Package Included:

  • 1 x Wireless Remote Control Switch
  • 1 x Wireless Remote