Home >> Security & Surveillance >> Home Alarm >> Zrabra Wireless Remote Control Switch System AK-RK02DS+AK-SF02

Zrabra Wireless Remote Control Switch System AK-RK02DS+AK-SF02

SKU:A1485000EW

Welcome to this page! This is a Wireless Remote Control Switch System. Wonderful wireless digital remote rontrol switch for home appliance! Just take a remote controller and you can easily control all electrical appliances at home, moreover, the remo...
Retail Price:
USD$ 17.38
Wholesale Price:
 
Wholesale Price
Quantity 2-78-1920-49≥50
Price USD$ 8.58USD$ 8.07USD$ 7.55USD$ 6.87
 
Qty:
pieces
If you want to buy only 1 piece, please alter the quantity in ‘My Cart’.
Note: you could enjoy the wholesale price of this item as long as the item quantity of your order is more than 1.
  • For online wholesaler or distributor, you can buy directly online. If you want to buy more than offered quantities for better price, please click wholesale inquiry.

  • Top Selling
 
  • Overview

Specifications:

Wireless Remote:


  • The metal cover makes it durable
  • Two keys wireless remote control
  • Emissive Frequency: 315 ~ 433MHz
  • Common Code IC: EV1527
  • Emissive Distance: 50 ~ 100m
  • Optional Code IC: SC2240  HCS301
  • Vibration Resistance:  1.5M
  • Color: Black
  • Material: Metal & Plastic
  • Compatibility: Annunciator of family, car, motorcycle etc

Wireless Remote Control Switch:


  • Operating Voltage: DC12 V
  • Methods of Work: Point move, self-locking
  • Output Mode: 2 road leads off signals
  • Size: 50 x 34 x 15mm / 2.0 x 1.3 x 0.6in(L x W x H)
  • Two-way independent study affect each other, combined application of flexible
  • Using large-capacity storage, each road can learn multiple remote controls (15 and above), supporting convenient
  • Can learn a fixed code / learning code remote controls (1527/2240, etc.), vibration resistance limit can be commonly used 125-475
  • Remote control manual can be used; operation / modification convenient

Details:

Zrabra Wireless Remote Control Switch System AK-RK02DS+AK-SF02


  • It is wonderful wireless digital remote rontrol switch system for home appliance
  • Made of high quality material, the Wireless Remote Control is durable and reliable for long time use

Zrabra Wireless Remote Control Switch System AK-RK02DS+AK-SF02


 
Zrabra Wireless Remote Control Switch System AK-RK02DS+AK-SF02


  • This remote control manual can be used; operation / modification convenient
  • This Wireless Remote Control switch system can be used in garage door, roller shutter door or windows, remote control door lock, etc.

Zrabra Wireless Remote Control Switch System AK-RK02DS+AK-SF02

Zrabra Wireless Remote Control Switch System AK-RK02DS+AK-SF02

Zrabra Wireless Remote Control Switch System AK-RK02DS+AK-SF02

Zrabra Wireless Remote Control Switch System AK-RK02DS+AK-SF02


  • The remote control switch system easy installation and use conveniently
  • This Durable Wireless Remote Control Switch System is small enough to fit in a pocket or on a keychain

How to Build a Wireless Remote Control


  • Simple wireless devices use various components to activate an infra-red signal that broadcasts to a receiver box, allowing the user to program the control. Basic wireless remote controls simply turn a device on or off. Components used in a wireless device can be found at most electronics outlets and hobby shops. Specialized retail establishments have pre-packaged kits that can be used by a beginner. At the very least, even experienced electronics enthusiasts use pre-made remote control boxes due to the simplicity of their design, including ergonomic support. The structure of the wireless remote control provides a builder with not only knowledge but the reasons a receiver can be controlled by the device

Instructions:


  • Open the remote control housing and place a push button switch on the side. In the upper right corner of the housing, fasten a 3-volt battery holder. Be sure enough room is available to install and remove the battery
  • Run a wire from the push button switch and link to the 3-volt battery holder at the negative connection. Attach another wire to the push button switch and lead it to the Meg 1/4W resistor and the NPN silicon transistor. Run a third wire from the Meg 1/4W resistor and attach it to the 22K 1/4W resistor and and the PNP silicon transistor
  • Position the infra-red LED on the front of the housing. Attach the LED and run wires to both transistors. From the 22K 1/4W resistor, run a wire to the C220.01uF 16v ceramic disk capacitor. Run another wire between the NPN silicon transistor and the ceramic disk capacitor
  • From the positive connector on the 3-volt battery holder, connect a wire to the PNP silicon transistor. This will allow for proper current flow in a closed circuit. Ensure the push button switch is positioned to "off" and place a 3-volt battery into the holder. Close the remote control housing
  • Point the remote control at a receiver, making sure the LED on the control is aimed at the LED of the receiver. Push the button and the receiver should power on and off. To adjust the receiver to be programmed, point the remote control and hold down the push button switch. Adjust the pot or taper on the receiver

How to Reset a Remote Control:

If you want to add another remote control for your garage door opener or need to replace a dead battery and reprogram an existing remote, chances are you'll have to reset the opener with the base unit for it to work. The process involves just a few steps and is relatively easy to do


  • Replace the battery by opening the remote, taking out the old one(s) and putting in the new one(s). Make sure you buy the right battery for your remote. Match the battery type, size and voltage that came with the remote
  • Use a step ladder to access the garage door motorized unit, usually equipped with a safety light. Locate the reset or "learn" button on the unit. Many times, this small button is recessed, so you might need a pen or pencil to reach it
  • Push the reset or "learn" button on the opener. While the reset indicator light is blinking for about 30 seconds, point your remote at the opener, then press and hold the remote button that opens the door, and the reset light should stop blinking and glow steady to indicate the controller and opener are now synchronized. If the process doesn't work the first time, try again to make sure you pressed your button during the time when the indicator light is blinking

Package Included:


  • 1 x Wireless Remote Control Switch
  • 1 x Wireless Remote