Home >> Car & Motorcycle Accessories >> Car Parts >> 1/4in CMOS OV7950 170° Wide Angle Car Rear View Camera for Audi Series Sedan HL-5804

1/4in CMOS OV7950 170° Wide Angle Car Rear View Camera for Audi Series Sedan HL-5804

SKU:A1734000AL

Do you want have a Car Rear View Camera which can help you avoid accidents? This Camera must be a good product which can meet your needs. Rear-view cameras are especially useful in tight parking lots, dark areas or in places where children might be r...
Retail Price:
USD$ 90.78
Wholesale Price:
 
Wholesale Price
Quantity 2-56-1415-39≥40
Price USD$ 42.69USD$ 34.77USD$ 26.86USD$ 16.31
 
Qty:
pieces
If you want to buy only 1 piece, please alter the quantity in ‘My Cart’.
Note: you could enjoy the wholesale price of this item as long as the item quantity of your order is more than 1.
  • For online wholesaler or distributor, you can buy directly online. If you want to buy more than offered quantities for better price, please click wholesale inquiry.

  • Top Selling
 
  • Overview

Specifications:


  • IP Rating: IP66
  • TV Lines: 420 TV Lines
  • Sensor: 1/4in color CMOS
  • System: NTSC
  • Numbers of Pixels: 580 x 492Pixels
  • Lens Angle: 170 degrees
  • Operating Temperature: -25℃ ~+75 ℃
  • Operating Voltage: 12V DC
  • Compatible with: Audi
  • Minimum illumination 0.2 LUX
  • Mounting lamp instead of lighting facilities
  • With distance label
  • Good choice for you
  • This is essential because the driver and the rear-view camera are in opposite positions
  • Rear-view cameras are also generally mounted at a downward angle
  • These cameras enable drivers to see objects and people directly behind their vehicles
  • This is a non-OEM product

Details:

1/4in CMOS OV7950 170° Wide Angle Car Rear View Camera for Audi Series Sedan HL-5804


  • These cameras enable drivers to see objects and people directly behind their vehicles

How to Install a Rear-View Camera in Your Car:


  • Disconnect the battery cables from the battery. Check the vehicle's repair manual to find out what size wrench to use. Leave the disconnected cables a safe distance from the battery posts
  • Decide where you want to install the rear-view camera. Most people put them in the plastic bumper so they don't have to drill into the car's sheet metal
  • Drill a hole for the camera. Check the installation instructions to see what size drill bit to use. Don't make the hole too large or the camera will fall out
  • Place the camera in the hole using the rubber grommet supplied with the camera. Make sure the camera and grommet are tight
  • Attach the camera's power wire to the backup-light power wire on your car. You'll have to splice the wires together. Use wire cutters to cut the wires, leaving enough excess wire to reconnect. Strip the ends of the wire to expose the bare wire using wire strippers. Splice the wires together using a two-into-one connector. This will give the rear-view camera power when you put the car in reverse
  • Route the camera's output wire to the rear-view monitor and connect the wire to the monitor's input. For installation of the monitor, see the monitor's installation instructions
  • Reconnect the battery, start the car and put the car in reverse. The rear-view monitor should turn on and give you a view of what's behind you

Package Included:


  • 1 x Car Rear View Camera for Audi Series 
  • 1 x User Manual
  • 1 x Positive - Negative Power Connection Cable