Home >> Security & Surveillance >> Surveillance Accessories >> 8mm 46 Degree Wide Angle Fixed CCTV Board Lens F2.0

8mm 46 Degree Wide Angle Fixed CCTV Board Lens F2.0

SKU:A14930000H

Lens is the main part of a camera. Lens naturally became the key factor when choosing a high quality camera. No matter which kind of camera you use, you must check the parameter of the lens. If you are searching for a security surveillance camera len...
Retail Price:
USD$ 5.98
Wholesale Price:
 
Wholesale Price
Quantity 2-78-1920-49≥50
Price USD$ 3.99USD$ 3.72USD$ 3.45USD$ 3.09
 
Qty:
pieces
If you want to buy only 1 piece, please alter the quantity in ‘My Cart’.
Note: you could enjoy the wholesale price of this item as long as the item quantity of your order is more than 1.
  • For online wholesaler or distributor, you can buy directly online. If you want to buy more than offered quantities for better price, please click wholesale inquiry.

  • Top Selling
 
  • Overview

Specifications:


  • 8mm standard board security camera lens
  • The 8mm Wide Angle Board Lens provides a standard field of view which is ideally suited for most installations
  • A 8mm camera lens will bring you closer to the action than a wide angle lens, and when used with an IR camera, it will not cause glare from the IR light
  • All IR camera manufacturers recommend using a 8mm standard board lens or higher for use with their IR cameras
  • CCTV Board Lens is easy to Install. Replacement camera lens easily threads in after removal of the previous lens
  • Focal: 8mm
  • Fov: 46°
  • F: 2.0
  • Matching Chip: 1/3"
  • Mount: M12 x 0.5
  • Nearest Distance: 0.1
  • Feild: Security monitor
  • Size: 14.5 x 14 mm / 0.57 x 0.55 in

Details:

8mm 46 Degree Wide Angle Fixed CCTV Board Lens F2.0


  • This is a 8mm standard security board camera lens

8mm 46 Degree Wide Angle Fixed CCTV Board Lens F2.0


  • Board camera lens which matches the standard angle lens on your board camera

8mm 46 Degree Wide Angle Fixed CCTV Board Lens F2.0


8mm 46 Degree Wide Angle Fixed CCTV Board Lens F2.0


  • Easy to install. Replacement lens easily threads in after removal of the previous lens is removed

How to Repair Threads on a Lens:


  • Cut a strip of wood that is narrower than the inside diameter of your lens. Round the end of the wooden strip using your jigsaw and wood rasp. This tool is your punch
  • Instructions
  • Place your lens cover on your wooden board, so half of the lens cover is off the side of the board and the rest is on the board. Allow 4 inches of board on either side of the semi-circle created on the board with your lens cap. Mark a pencil line on the outside of the semi-circle and remove the lens cap
  • Cut out the semi-circle marked on the wooden board
  • Smooth the semi-circle cut in the wood with coarse sandpaper or a wood rasp. This tool is your camera stabilizer
  • Cut a strip of wood that is narrower than the inside diameter of your lens. Round the end of the wooden strip using your jigsaw and wood rasp. This tool is your punch
  • Place the lens on the lens stabilizer, dinged side down. If necessary, ask a helper to hold the lens in place for you
  • Insert the rounded edge of the punch against the lens thread ding. Pound on the flat end of the punch to press out the bent portion of the threads

Package Included:


  • 1 x Board Lens