Home >> Security & Surveillance >> Surveillance Accessories >> Fusionsea 12V DC 9 Outputs Switch Mode CCTV Camera Power Supply

Fusionsea 12V DC 9 Outputs Switch Mode CCTV Camera Power Supply

SKU:A0795000QM

Brand new 12V DC 9 Outputs switch mode CCTV power supply for for powering high output CCTV cameras and accessories. This power supply with surge protected outputs with power indication between 100V~240V, 5A total output current as well as the 1.1A fu...
Retail Price:
USD$ 258.78
Wholesale Price:
 
Wholesale Price
Quantity 2-45-910-29≥30
Price USD$ 105.83USD$ 100.05USD$ 94.27USD$ 86.57
 
Qty:
pieces
If you want to buy only 1 piece, please alter the quantity in ‘My Cart’.
Note: you could enjoy the wholesale price of this item as long as the item quantity of your order is more than 1.
  • For online wholesaler or distributor, you can buy directly online. If you want to buy more than offered quantities for better price, please click wholesale inquiry.

  • Top Selling
 
  • Overview

Specifications:


  • Certification: CE/ROHS
  • Input Voltage: AC 100-240V
  • Input Voltage Frequency: 50/60Hz
  • Output Voltage: DC 12V +/-5%
  • Total Output Current: 5A
  • Total Outputs: 9
  • Fuse Type: PTC (Resetable)
  • Fuse Rating: 1.1A

Features:


  • General Protection: Each output has independent PTC fuse and LED indicator, when problem occurs, only affect the independent output, other outputs still working
  • Circuit Short Protection: When short condition occurs, independent PTC fuse will open the circuit,when condition removed, PTC fuse will automatically back to close
  • High Voltage Protection: When high voltage occurs, the surge protection will be hit through to protect the connected device
  • Over Current Protection: When over current occurs, the power supply will automatically switch to self-protection status, when condition removed, then switch back to normal
  • This cctv power supply is efficient, environmental, and security
  • This power supply with surge protected outputs with power indication between 100V~240V
  • Offering a single solution for large security camera or video surveillance system
  • Can be used in the entrance guard, the building, the CCTV supervisory system and so on peaceful against

Details:
Fusionsea 12V DC 9 Outputs Switch Mode CCTV Camera Power Supply



 


  • Surge protected outputs with power indication 100V~240V operation 

How to Install a Power Supply Box for Security Cameras:


  • Mount the power supply box on the wall using your drill and the supplied mounting screws. It should be close to an outlet and your security camera cables. If you can, mount the box over a stud and drive the screws into the stud. The mounting screws that came with your box may not be long enough to penetrate the drywall and the stud adequately. If this is the case, use two-inch drywall screws, which can be purchased at any local hardware store or large department store
  • Remove the punch-out from the power supply box that will provide the best place to insert the power wires from your cameras
  • Split the power wires from the Siamese cable (if applicable) and strip the power wires about 1/2 inch and twist the copper strands together
  • Insert the camera power wires through the punch-out and connect them to the power terminals. The power terminals will be marked positive (+) and negative (-) or common. Make sure you connect the red wire or the wire marked positive to the positive side of the power terminal. The positive wire is usually red, marked with a stripe, or marked with a plus sign
  • Close the box, securing it with the provided screws or lock. Insert the power cord in the box (this cord works just like a computer power cord) and plug the power cord in. Your power supply box may have come with the power cord built into the box. If so, simply plug the power cord into a wall outlet

Package Included:


  • 1 x 12V DC 9 Outputs Switch Mode CCTV Camera Power Supply