Home >> Security & Surveillance >> Surveillance Accessories >> Fusionsea DC 12V 18 Outputs Switch Mode CCTV Camera Power Supply HT1218-10A-PTC

Fusionsea DC 12V 18 Outputs Switch Mode CCTV Camera Power Supply HT1218-10A-PTC

SKU:A0795000QH

Each output has independent PTC fuse and LED indicator, when problem occurs, only affect the independent output, other outputs still working. When short condition occurs, independent PTC fuse will open the circuit,when condition removed, PTC fuse wil...
Retail Price:
USD$ 211.98
Wholesale Price:
 
Wholesale Price
Quantity 2-45-910-29≥30
Price USD$ 76.57USD$ 74.61USD$ 72.65USD$ 70.04
 
Qty:
pieces
If you want to buy only 1 piece, please alter the quantity in ‘My Cart’.
Note: you could enjoy the wholesale price of this item as long as the item quantity of your order is more than 1.
  • For online wholesaler or distributor, you can buy directly online. If you want to buy more than offered quantities for better price, please click wholesale inquiry.

  • Top Selling
 
  • Overview

Specifications:


  • Application CCTV Camera, PTZ, IR Illuminator, Video Processor Access Control , etc.
  • General Protection: Each output has independent PTC fuse and LED indicator, when problem occurs, only affect the independent output, other outputs still working
  • Circuit Short Protection: When short condition occurs, independent PTC fuse will open the circuit,when condition removed, PTC fuse will automatically back to close
  • High Voltage Protection: When high voltage occurs, the surge protection will be hit through to protect the connected device
  • Over Current Protection: When over current occurs, the power supply will automatically switch to self-protection status, when condition removed, then switch back to normal
  • Input Voltage: AC 100-240V
  • Input Voltage Frequency: 50/60Hz
  • Output Voltage: DC 12V +/-5%
  • Total Output Current: 10A
  • Total Outputs: 18
  • Fuse Type: PTC (Resetable)
  • Fuse Rating: 1.1A

Detials:

Fusionsea DC 12V 18 Outputs Switch Mode CCTV Camera Power Supply HT1218-10A-PTC


How to Install a Power Supply Box for Security Cameras:


  • Mount the power supply box on the wall using your drill and the supplied mounting screws. It should be close to an outlet and your security camera cables. If you can, mount the box over a stud and drive the screws into the stud. The mounting screws that came with your box may not be long enough to penetrate the drywall and the stud adequately. If this is the case, use two-inch drywall screws, which can be purchased at any local hardware store or large department store
  • Remove the punch-out from the power supply box that will provide the best place to insert the power wires from your cameras
  • Split the power wires from the Siamese cable (if applicable) and strip the power wires about 1/2 inch and twist the copper strands together
  • Insert the camera power wires through the punch-out and connect them to the power terminals. The power terminals will be marked positive (+) and negative (-) or common. Make sure you connect the red wire or the wire marked positive to the positive side of the power terminal. The positive wire is usually red, marked with a stripe, or marked with a plus sign
  • Close the box, securing it with the provided screws or lock. Insert the power cord in the box (this cord works just like a computer power cord) and plug the power cord in. Your power supply box may have come with the power cord built into the box. If so, simply plug the power cord into a wall outlet

Tips & Warnings:


  • Read the installation manual that came with your power supply box to familiarize yourself with the installation process. Watch the videos (see Reference 1 and 2) to see examples of others installing a power supply box. To insure your box is mounted straight on the wall, use a small level. Most cameras require 12 volts DC, but older cameras may require 24 volts AC. Consult your camera documentation to insure you purchase the correct power supply box
  • It is critical you do not reverse the polarity of the power wires as indicated in Step 4. Doing so could damage your camera or power distribution box. If you are unsure which is positive and which is negative, you should consult the documentation that came with your cameras

Package Included:


  • 1 x DC 12V 18 Outputs Switch Mode CCTV Camera Power Supply