Home >> Security & Surveillance >> Surveillance Accessories >> DC 12V 4 Outputs CCTV Camera Power Supply CP1204-3A

DC 12V 4 Outputs CCTV Camera Power Supply CP1204-3A

SKU:A0795000QO

This is a DC 12V 4 Outputs CCTV Camera Power Supply. 3A output current, 4 total outputs, 1.1A fuse rating, input voltage can be selected between 100V and 240V. Suitable for CCTV Camera, PTZ, IR illuminator, video processor access control etc. A good ...
Retail Price:
USD$ 165.98
Wholesale Price:
 
Wholesale Price
Quantity 2-45-910-29≥30
Price USD$ 59.70USD$ 56.19USD$ 52.68USD$ 48.00
 
Qty:
pieces
If you want to buy only 1 piece, please alter the quantity in ‘My Cart’.
Note: you could enjoy the wholesale price of this item as long as the item quantity of your order is more than 1.
  • For online wholesaler or distributor, you can buy directly online. If you want to buy more than offered quantities for better price, please click wholesale inquiry.

  • Top Selling
 
  • Overview

Specifications:


  • Input Voltage: AC100~240V
  • Input Voltage Frequency: 50/60Hz
  • Output Voltage: DC 12V+/-%
  • Total Outputs: 4
  • Fuse Type: PTC(resetable)
  • Fuse Rating: 1.1A
  • Dimension: 170 x 170 x 60mm / 6.7 x 6.7 x 2.4(L x W x H)
  • General Protection: Each output has independent PTC FUSE and LED indicator,when problem occurs,only affect the independent output,other outputs still working
  • Circuit Short Protection: When short condition occurs, independent PTC fuse will open the circuit,when condition removed, PTC fuse will automatically back to close
  • High Voltage Protection: Each output has independent PTC fuse and LED indicator,when high voltage occurs, the surge protection will be hit through to protect the connected device
  • Over Current Protection: When over current occurs,the power supply will automatically switch sel-protection status,when condition removed,then switch back normal
  • Application: CCTV Camera, PTZ, IR illuminator, video processor access control etc

Details:

DC 12V 4 Outputs CCTV Camera Power Supply CP1204-3A


  • Each output has independent PTC FUSE and LED indicator,when problem occurs,only affect the independent output,other outputs still working

How to Install a Power Supply Box for Security Cameras:


  • Mount the power supply box on the wall using your drill and the supplied mounting screws. It should be close to an outlet and your security camera cables. If you can, mount the box over a stud and drive the screws into the stud. The mounting screws that came with your box may not be long enough to penetrate the drywall and the stud adequately. If this is the case, use two-inch drywall screws, which can be purchased at any local hardware store or large department store
  • Remove the punch-out from the power supply box that will provide the best place to insert the power wires from your cameras
  • Split the power wires from the Siamese cable (if applicable) and strip the power wires about 1/2 inch and twist the copper strands together
  • Insert the camera power wires through the punch-out and connect them to the power terminals. The power terminals will be marked positive (+) and negative (-) or common. Make sure you connect the red wire or the wire marked positive to the positive side of the power terminal. The positive wire is usually red, marked with a stripe, or marked with a plus sign
  • Close the box, securing it with the provided screws or lock. Insert the power cord in the box (this cord works just like a computer power cord) and plug the power cord in. Your power supply box may have come with the power cord built into the box. If so, simply plug the power cord into a wall outlet

Package Included:


  • 1 x DC 12V 4 Outputs CCTV Camera Power Supply