Home >> Security & Surveillance >> Surveillance Accessories >> Camesovy 24V AC 4 Outputs Switch Mode CCTV Camera Power Supply CP2404-10A

Camesovy 24V AC 4 Outputs Switch Mode CCTV Camera Power Supply CP2404-10A


Brand new 24V AC 4 outputs switch mode CCTV power supply. 10A total output current, 3A fuse rating. Input voltage can be selected at AC110V or 220V. Optimized shape structure connected to the system to facilitate construction. Ripple small security c...
Retail Price:
USD$ 226.78
Wholesale Price:
Wholesale Price
Quantity 2-45-910-29≥30
Price USD$ 121.49USD$ 106.61USD$ 91.72USD$ 71.88
If you want to buy only 1 piece, please alter the quantity in ‘My Cart’.
Note: you could enjoy the wholesale price of this item as long as the item quantity of your order is more than 1.
  • For online wholesaler or distributor, you can buy directly online. If you want to buy more than offered quantities for better price, please click wholesale inquiry.

  • Top Selling
  • Overview


  • Input Voltage: AC 110V or 220V
  • Input Voltage Frequency: 60 Hz or 50 Hz
  • Output Voltage: AC 24V
  • Total Output Current: 10A
  • Total Outputs: 4
  • Fuse Type: PTC (Resetable)
  • Fuse Rating: 3A


  • Circuit Short Protection: When short condition occurs, independent PTC fuse will open the circuit,when condition removed, PTC fuse will automatically back to close
  • High Voltage Protection: Each output has independent PTC fuse and LED indicator,when high voltage occurs, the surge protection will be hit through to protect the connected device


Camesovy 24V AC 4 Outputs Switch Mode CCTV Camera Power Supply CP2404-10A

  • Power protection also features output overvoltage, overcurrent, short circuit protection

How to Check Power Supply Voltage:

  • A power supply is an electronic assembly that supplies electrical voltage. If the power supply is part of a larger assembly, such as a computer, then the power supply is meant to provide the voltages necessary to power the rest of the electronics. One of the first steps in troubleshooting a malfunctioning electronic device is to check the voltages from the power supply. If the voltages are correct, the problem lies elsewhere. But if the voltages are not correct, then the power supply can be determined to be faulty or in need of adjustment


  • Connect your multimeter probes to your multimeter and turn it on. Observe the correct polarity. The red probe is the positive one, and it is plugged into the red plug on the multimeter. The black probe is the negative or common probe, and is plugged into the black plug on the multimeter
  • Set your multimeter function to measure either an alternating current (AC) or direct current (DC) voltage, depending on the output of your power supply. Most power supplies for commercial use produce a DC voltage
  • Turn on the power supply. Make sure it is plugged into the appropriate power source. Most power supplies operate by plugging into a typical 120 house circuit
  • Connect the multimeter probes to the power supply output terminals by touching the probes to the metal contacts. Power supply outputs are usually marked with a positive (+) sign and a negative (-) sign. Observe the correct polarity with your probes by touching the red probe to the positive terminal and the black probe to the negative terminal
  • Read the multimeter display for the output voltage of the power supply

Package Included:

  • 1 x 24V AC 4 Outputs Switch Mode CCTV Camera Power Supply