- Signal System: NTSC/PAL
- Pick Up Device: 1/3 inch Sony Color High Resolution CCD
- Picture Elements: NTSC:811Hx508V PAL:795Hx596V
- Resolution: 550 TVL
- Min Illumination: 0Lux (66 Pieces IR LED ON)
- Vertical Frequency: NTSC:60Hz PAL:50Hz
- Horizontal Frequency: NTSC:15.734KHz PAL:15.625KHz
- Clock Frequency: NTSC:28.636MHz PAL:28.375MHz
- Scanning System: 2:1 Interlace
- S/N Ratio: ≥52dB
- Electronic Shutter: Fixed
- Lens: 10-40mm Varifocal Auto Iris IR Lens
- GAMMA: 0.45
- Video Out-put: 1V p-p,75Ω
- Power Supply: DC12V+10%
- Current Consumption: 1250mA (MAX)
- Recommend Working Distance: 5-30M
- Dimension: 370 x 142 x 110mm/14.57 x 5.59 x 4.33in
- Storage Temperature: -30℃ ~60℃
- Operating Temperature: -10℃~40℃
- CDS, which control the IR LED on/off. Please dont let it be covered by anything, and make sure all the environments light can come in this hole
- If you want to change the IR LED working level, please loosen this housing and adjust the camera inside button. adjust clockwise this button will let the IR LED on under darker environment. adjust anticlockwise this button will let the IR LED on under brighter environment. After you get the proper level of IR LED on, please dont forget to fasten the screw, otherwise, the camera will be moistened, and can not work in proper condition
- In order to prevent electronic shock and/or destroy waterproof, dont loosen any screws and/or covers
- Adjust the sunshade cover to avoid sunlight shoot the lens directly
- Do not directly touch the front glass. If necessary, use a soft cloth moistened with alcohol to wipe off the dust
- Avoid places where there are frequent vibrations or shocks
- Dont operate the camera beyond its temperature, power source ratings
- When any abnormalities happen, make sure to unplug the camera and contact your local dealer
How to Set Up a Surveillance Video Camera:
- Decide if you want an indoor or outdoor system. Indoor cameras are not weather tight and should not be exposed to extreme temperatures or moisture. Outdoor cameras are built in a protective shell.
- Choose a wired or wireless connection. A wireless system is much easy to install with no limitations on the distance between the devices and the monitor. The only issue with wireless connections is the possibility of signal interference. A wired connection will require more work, but you won't have to deal with signal interference.
- Determine camera position. It is important to place your camera in a position that will display the entire area you wish to view. Decide whether you want your camera visible or hidden. If you choose to set up a wired camera system, hiding your device and wiring will be more challenging.
- Drill holes in preparation for bracket mounting. If you are setting up more than one camera, make sure you allow enough distance in between. Test your camera or cameras by turning them on and placing them in position. View the coverage area and decide on where to drill your holes. If you are using a wired system, make sure the camera cables are long enough to connect your camera to your monitor.
- Attach brackets. Regardless of whether your camera is on the ground or on a wall, you will need to use brackets to securely position your camera. Use the screwdriver and make sure your brackets are tight and stable enough to hold your camera.
- Mount your camera. Attach your camera to the brackets. Make sure everything is secure. Remember, if you are setting up an outdoor system, your camera will be exposed to extreme weather conditions.
- Select a location for your monitor. Place your monitor in the location where you spend the most time. The surveillance camera is useless if you can't keep an eye on it.
- If you are using a wireless system, you are finished. If you are using a wired system, you will now have to run a cable from each camera to your monitor. Cables can run along door and floor edges or under a carpet. Use electrical tape or a staple gun to secure your wires. If your monitor does not have multiple plugs for your camera cables, you need to purchase a multiplexer. Plug your camera cables into the multiplexer and plug the multiplexer into the monitor.
- 1 x Camera
- 1 x User Manual
- 1 x Bracket
- 5 x Screw
- 3 x Plastic-Conical-Anchor
- 1 x Adapter